ASG 7.4V 1000 mAh 30C LiPo PEQ Battery Pack

ASG
Code: 17462
£13.99
  • 7.4v 2S
  • 1000mAh
  • 30C Rating

An ideal battery for those who have very limited space or for those who have a front wired PEQ box style setup or RC cars. With a 1000mAh 30C discharge expect a good rate of fire but 2 or 3 are recommended for a full day of constant shooting.

Full description

Charge this battery the right way...

Description

The battery comes in a PEQ box layout, meaning it is very compact and makes it ideal for squeezing into tight places like PEQ boxes, external battery bags/cases and small skeleton stocks, like the ones found on the Honey Badgers' stock. The battery supplies a 30c continuous discharge rate and is rated at 1000mAh meaning you'll possibly need two for a full days' play. This battery is also ideal for use in remote control Cars, Boats, Planes and other Toys, as well as in DIY Electronics projects.

Features

  • 7.4v
  • 1000mAh
  • 30c rating
  • Approx. 5.5cm x 2cm x 3cm
  • 9cm cable
  • Ideal for a PEQ battery box

Package Includes

  • 7.4V 1000 mAh 30C LiPo PEQ Battery Pack
  • Instruction Manual

Special Instructions

When using your LiPo battery ensure that it does not fully discharge, otherwise you may damage or destroy your battery, if you feel that your rate of fire is decreasing then stop using your battery immediately. Battery levels can be checked by plugging a LiPo Alarm into your battery.

Safety Precautions

Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure. 

Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be more than 1.0C as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.

We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.

Specification

General

Product Length
Approx. 5.5cm
Product Height
Approx. 2cm
Product Width
Approx. 3cm
Patrol Base - Warning Icon
Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Battery Specification

Battery Type
Li-Po
Battery Configuration
PEQ
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Battery Voltage
7.4V
Battery Amperage
1000mAh
Battery Discharge Rate
30
Battery Cell Count
2
Battery Cell Voltage
7.4V
Battery Cell Height
2cm
Battery Wire Length
9cm

Size guide

Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.

Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.

If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.

We always recommend charging LiPos and other batteries in a charging bag.

If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.