WELL MB03A Sniper Rifle

Well
Code:
£89.99
  • Bolt Action Rifle
  • Great Starter Rifle
  • Top And Lower Rail

Featuring a custom stock with both upper and lower 20mm RIS accessory rails, the MB03A is WELL's unique version of the ever-popular VSR / BAR 10 bolt action Airsoft sniper rifle, and is perfect for those looking to get started in Airsoft sniping.

Full description

Description

The MB03A is predominantly constructed from alloy, with alloy receiver, barrel assembly and internals, and the stock constructed of lightweight polymer. The rifle features a selection of 20mm rails allowing the attachment of aftermarket parts and accessories, with a top 13.5cm rail for attaching sights and scopes, along with a front bottom 6cm long rail for attaching bipods and other accessories as required by the user. 

The weapon comes supplied in two sections, the upper assembly which includes the receiver and barrel, and the stock. Users can quickly and easily assemble the two halves using the tools provided by simply slotting them together and screwing in the two retention screws. We advise tightening the screws to hand tight while being careful not to over tighten the screws as this can damage the cylinder. The front of the barrel features a removable muzzle end cap, which allows the attachment of a thread adaptor for attaching silencers and suppressors. 

The weapon features an adjustable hop-up system, which is designed to add spin to the BBs, and can be adjusted via an external lever on the underside of the weapon, making it easy to adjust on the fly. The Hop-Up adds spin using a small patch of rubber before the barrel, which stabilises the BB, enhancing its range and accuracy. The lightweight polymer stock is unique to the MB03A, featuring subtle differences to the original VSR / BAR 10 design. 

The rear of the stock features a rubberised butt plate to improve the point of contact between the user and the weapon, ensuring that you have a steady and firm grip on the weapon. The trigger guard is a large design, perfectly suited for users wearing bulky gloves in winter. This rifle is perfect for those who are looking for a great entry level sniper rifle, or for those who want a base for a project weapon.

Features

  • Standard VSR / BAR10 receiver and bolt
  • Trigger lock safety design
  • 13.5cm long 20mm scope rail*
  • Lower 6cm long 20mm RIS rail for bipods
  • Front and rear sling loops for two point slings
  • Comes with required tools for building
  • Removable barrel end cap for attaching suppressor adaptors
  • Rubberised butt plate
  • Adjustable Hop-Up for enhanced range and accuracy performance
  • Hop-Up is adjusted from the outside of the rifle
  • Large trigger guard for glove wearers
  • Push button magazine release

Package Includes

  • MB03A Sniper Rifle - Black
  • Magazine
  • Speed loader
  • Cleaning rod
  • Tools

Special Instructions

When assembling the MB03A Sniper Rifle it is important that the rearmost screw in the stock is not over tightened. We suggest tightening the screw until it is hand tight but not cranking it down as this can often cause damage to the cylinder and render the rifle inoperable. 

This Sniper Rifle comes in two parts, the Upper and Lower, and must be put together then screwed together to hold. The process is simple, but should you require help please feel free to call the Workshop on: 01484 644709 for help.

*Scope Mount

Please note that the rail section for mounting a scope on this rifle is quite short and can make it difficult to mount some scopes that have integrated mounts. We would recommend using a rifle scope that utilises scope rings for mounting so that they can be adjusted in position to fit on the rail.



Specification

General

Weapon Construction External
Weapon Type
Sniper Rifle
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 401fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Package
Included Items
  • Magazine
  • Instruction Manual
  • Cleaning Rod
  • Speed Loader
  • Tools
Skill Level Icon
User Skill Level
Regular Player

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.4kg
Weapon Length Extended
Length (Extended)
114cm

Construction

Colour Wheel Greyscale
Primary Colour
Black,
Faux Wood
Faux Wood
,
Colour Wheel Greyscale
Secondary Colour
Black
Two Tone Icon
Pre Two-Toned
No
Construction Icon
Construction
Alloy receiver, barrel & internals. Polymer stock.
Weapon Construction External
External Construction
Polymer
Alloy
Gearbox Icon
Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
Powered By
Spring
Blowback Icon
Blowback
None
Weapon Platform
Sniper Rifle, VSR / Bar10,
Magazine Style Icon
Magazine Style
Snipers Rifle, VSR / Bar10,
Fire Select Icon
Fire Selector
Bolt Action
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Right Handed
Weapon Configuration Icon
Weapon Configuration
Bolt Action
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.4g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Slider
Hop-Up Unit Location Icon
Hop-Up Location
External slider on stock

Furniture

Weapon Furniture Icon
Furniture
  • Railed Handguard
  • Railed Receiver
Rail System Icon
Rail System
20mm RIS / RAS
Sight Type Icon
Sight Type
Open Iron Sight

Magazine Specific

Magazine Type
Low Capacity , Sniper Rifle,
Magazine BB Capacity
Approx. 15 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Product Testing Data

Notepad Icon
Test Description
480
Notepad Icon
Tested Using
Blaster 0.2g BBs
Notepad Icon
Test Date
15/04/2019

Detailed Power Tests

FPS Icon
Joule Creep Advisory
Be advised that during testing the rifle peaked in power when using 0.25g BB, and is site safe under the limit for BB weights between 0.20g to 0.50g in the UK.
FPS
FPS, using 0.20g BB
Approx. 401fps, using 0.20g BB
FPS, using 0.25g BB
Approx. 361fps, using 0.25g BB
FPS, using 0.28g BB
Approx. 333fps, using 0.28g BB
FPS, using 0.30g BB
Approx. 321fps, using 0.30g BB
FPS, using 0.32g BB
Approx. 306fps, using 0.20g BB
FPS, using 0.40g BB
Approx. 264fps, using 0.20g BB
FPS, using 0.43g BB
Approx. 249fps, using 0.43g BB
FPS, using 0.50g BB
Approx. 222FPS, using 0.20g BB
Joules
Joules, using 0.20g BB
Approx. 1.49J, using 0.20g BB
Joules, using 0.25g BB
Approx. 1.51J, using 0.25g BB
Joules, using 0.28g BB
Approx.1.44J, using 0.28g BB
Joules, using 0.30g BB
Approx. 1.42J, using 0.30g BB
Joules, using 0.32g BB
Approx. 1.38J, using 0.20g BB
Joules, using 0.40g BB
Approx. 1.29J, using 0.40g BB
Joules, using 0.43g BB
Approx. 1.24J, using 0.43g BB
Joules, using 0.50g BB
Approx. 1.24J, using 0.50g BB

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
325 0.98 1.23 1.37 1.47 1.57 1.77 1.96 2.11 2.21 2.45
328 1.00 1.25 1.40 1.50 1.60 1.80 2.00 2.15 2.25 2.50
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
335 1.04 1.30 1.46 1.56 1.67 1.88 2.09 2.24 2.35 2.61
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
345 1.11 1.38 1.55 1.66 1.77 1.99 2.21 2.38 2.49 2.76
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
355 1.17 1.46 1.64 1.76 1.87 2.11 2.34 2.52 2.63 2.93
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90
420 1.64 2.05 2.29 2.46 2.62 2.95 3.28 3.52 3.69 4.10
430 1.72 2.15 2.40 2.58 2.75 3.09 3.44 3.69 3.86 4.29
440 1.80 2.25 2.52 2.70 2.88 3.24 3.60 3.87 4.05 4.50
450 1.88 2.35 2.63 2.82 3.01 3.39 3.76 4.04 4.23 4.70
460 1.97 2.46 2.75 2.95 3.15 3.54 3.93 4.23 4.42 4.91
470 2.05 2.57 2.87 3.08 3.28 3.69 4.10 4.41 4.62 5.13
480 2.14 2.68 3.00 3.21 3.42 3.85 4.28 4.60 4.82 5.35
490 2.23 2.79 3.12 3.35 3.57 4.02 4.46 4.80 5.02 5.58
500 2.32 2.90 3.25 3.48 3.72 4.18 4.65 4.99 5.23 5.81
510 2.42 3.02 3.38 3.62 3.87 4.35 4.83 5.20 5.44 6.04