- Skirmish Ready DMR
- Amazing Build Quality
- Semi & Auto Fire Select
A faithful electric Airsoft replica of the 7.62x54mm beast of the East which has seen use from 1963 until this very day.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£5.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
This Airsoft SVD replica is build to an amazing standard and is without a doubt the finest Dragunov/SVD replica on the market. The Polymers used on the handguard and stock are high density which feel amazing to the touch and keep a sleek, matte finish across the whole rifle which helps it look and feel like the real deal. The outer barrel assembly, receiver, magazine and fire controls are made from Alloy which keeps the whole rifle locked tight for a smile-inducing experience. As an improvement over previous SVD models this version is held together VERY tight, which means you have a rock solid rifle with no wobble, but does mean that the battery compartment is stiffer to access than before. It is accessed by removed the rotating pin from the handguard and also the grub screw from the locking collar. Inside you will find a Mini Tamiya connector and plenty of room for a slim LiPo Crane Battery.
The rifle shoots great at ~328FPS (manufacturer downgraded so this may vary) in both Semi and Automatic firemodes, and the adjustable ironsights combined with the potent HOP unit means you can reach out and touch players at long distances, especially when combined with heavyweight BBs (0.25g+). True to the original weapon, the ironsights are easily adjusted by squeezing the button and sliding the rangefinder forward to raise the ironsights, which can be very effective when combined with a dialed in HOP. The Rotary HOP is accessed via the charging handle, and is easily adjusted by simply holding it open and turning the adjustment wheel. The magazine included is a 200rnd high cap which again, is made to very tight tolerances so can be a bit stiff to open! The cheek pad on the stock feels great and helps complete the overall look, helping you with a comfortable view down the ironsights. The SVD features the stereotypical 'Dovetail rail' on the side of the receiver which can accept side rails or proprietary optics like the PSO to complete the 'Special Forces' look.
If you're looking for a DMR which is ready to go out of the box and is different from your run on the mill AR platform rifle then this may just be the thing you're looking for.
Россия вперед!
Features:
- Amazing build quality
- High density Polymers
- Alloy receiver
- Rock-solid rifle
- 200rnd high cap magazine
- Front wired
- Front & rear sling points
- Semi & Auto fire select
- Mini Tamiya connector
- Front wired
- Adjustable ironsights
- Rotary HOP unit
- Heavyweight BBs recommended
- Skirmish-ready DMR
- 3.4kg total weight
- 7.4v LiPo Crane recommended
- Metal gearbox
- Dovetail side rail
Package Includes:
- SVD Dragunov Electric Sniper Rifle
- 200rnd High Cap Magazine
Specification
General
 |
Snipers Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 328fps ± 10%, using 0.20g BB
|
 |
|
 |
Regular Player
|
Weight and Dimension
 |
Approx. 3.5kg
|
|---|---|
 |
120cm
|
Construction
 |
Black
|
|---|---|
|
|
Black
|
 |
No
|
 |
Alloy barrel assembly, receiver, magazine & trim. Polymer stock and handguard.
|
|
|
Polymer
Alloy
|
 |
Polymer
Alloy
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
SVD, Snipers Rifle,
|
 |
SVD
|
 |
   |
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Behind mock bolt plate when charging handle to the rear
|
Furniture
 |
Fixed
|
|---|---|
|
|
1 Position
|
 |
Iron Sights
|
 |
Stock , Handguard ,
|
Magazine Specific
 |
High Capacity, AEG,
|
|---|---|
 |
Approx. 200 Rounds
|
 |
Fill Window
|
 |
Top
|
Electric Gun Specific Information
Gearbox
 |
Front Wired
|
|---|
Battery Specific
 |
 |
|---|
Suggested Battery
 |
Li-Po
|
|---|---|
 |
Crane
|
 |
7.4v
|
Product Testing Data
 |
328FPS
|
|---|---|
|
|
ASG Blaster 0.20g BBs
|
|
|
03/04/19
|
You might also like
- Flip Up/Down
- Replacable Shield
- Fits Any 20mm Rail
Designed to be fit to Airsoft Rifles Rails in front of expensive Sights and Scopes to deflect incoming BBs to prevent the Sights becoming damaged.
- Fits on 20mm RIS / RAS Rails
- Cheaper than a new sight
- 5cm x 5.5cm of protection
This lens protector is a must have product for any Airsoft Skirmisher who intents to play in a CQB environment, protecting your sights and scopes from being shot out by stray BB. Guess whats cheaper: A new sight, or a new lens protector?
- Padded Walls & Divider
- Removable Carry Straps
- Excellent Rifle Protection
A proper multi-gun carrier system that has a padded exterior walling and a padded gun divider.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- 2x Levels Of Foam
- 140cm x 39cm x 14cm
- Can Be Dragged On Wheels
The largest hard case produced by NUPROL allowing you to store some serious fire power including sniper rifles! A must for those who want to truly care for their pride and joy.
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
A 1KG bag containing approximately 4000 high quality 0.25g competition grade Airsoft BBs, constructed from polymer, and are polished to provide a smoother aerodynamically enhanced external surface.
- Exterior MOLLE
- External Pockets
- Internal Rifle Pouch
A protective soft case for transporting your Airsoft rifles and other kit, with a waterproof coated exterior and thick foam padding to protect your pride and joy.
- White BIO BBs
- 0.25g in Weight
- Approx 3300 BBs
NUPROL's latest environmentally friendly offering into the Airsoft Market with newly designed 0.25g BBs made to offer consistent performance and great accuracy, which Degrade and Breakdown over time.
- Cubic Foam Filled
- Can Be Padlocked
- Wheeled Hard Case
A hard carry case designed for any AR sized RIF but will suit a wide range of firearms from Airsoft to Air rifle and real steal. It's internal space for weapons Measures at 101cm length by 33cm height and 9cm depth.
- 2400rnds
- Tracer Rounds
- Green/Red Glow
Tracer BBs which glow bright red in the dark once combined with your Airsoft tracer illumination unit, allowing you to accurately see where you are shooting.
- Large Front Storage
- Designed For Scorpion Evo
- 51cm(W) x 36cm(H) x 10cm(D)
A carry case designed specifically for the Scorpion Evo, and offering players the ability to carry both their Airsoft gun and everything you need for a skirmish pretty much within something the size of a suit case.
- Approx. 3300 BBs
- Green Tinted 0.25g
- ±0.01mm Tolerance
Add a little more accuracy waste fewer shots at your next Airsoft game day. 0.25g BB's are often used by those chasing a bit more accuracy outdoors on windy days, to shoot through vegetation easier and make your targets definitely feel the hit.
- Wide Compatibility
- Eggshell Inner Foam
- Overlapping Lock Tabs
Hard carry case designed for shotguns but will suit an array of weapons from Airsoft to air rifles and real steel.
- 0.01mm Tolerance
- Polyactide Material
- Multi-Polish Process
A bottle of 3300 BBs which are constructed from PLA (Polyactide), have a tolerance of 0.01mm +/- for excellent consistency, and go through a multi-polish process to ensure a perfect finish. They are manufactured to be as accurate as possible, with less than 5% air bubbles for a very precise centre of gravity which will help achieve consistency when firing. They are supplied in a square screw top bottle and have an individual weight of 0.25g. These BBs can be lifted harder using your HOP unit than lighter BBs and are ideal for both indoor and outdoor play.