- Stabilizes Barrels
- Improve Accuracy
- For ARES Striker Rifle
A pair of Barrel Stabilisers designed to prevent barrel wobble in Airsoft ARES AMOEBA STRIKER Sniper Rifles, increasing the accuracy and consistancy of your shots.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£5.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Barrel Stabalisers are constructed from Polymer and feature removable Rubber O-Rings, and are designed to be easier and quicker to use than traditional Tape or Paper Barrel spacers. The Barrel Stabalisers improve the consistancy and accuracy of the rifle by preventing Horizontal and Vertical movement of the barrel when the weapon is fired, keeping the barrel streight as the bb travels down it. The spacers are simply slid into the Outer Barrel and then the Barrel down the center, making the mods quick and easy to install, making it a quick easy win for those looking to upgrade their rifle cheaply with little effort. The Spacers also feature Rubber O-Rings which are fit to prevent slippage, and to grip the outer barrel to prevent movement. Should the O-rings need to be replaced they can easily be removed by placing a thin screwdriver through the notches and simply pulled off. This barrel spacer set is perfect for those Airsoft Skirmishers who are looking to tune their STRIKER Sniper Rifle to the best it can possibly be, or for those who are looking for a quick and cheap way of upgrading their rifle to get a competitive edge.
Features:
- For ARES AMOEBA Striker Bolt Action Sniper Rifle
- Pair of two Barrel Stabiliser
- Stabilises the Inner Barrel
- Promotes Accuracy
- Improves shot Consistency
- Rubber O-Rings for a better fit and to prevent slippage
- Notch for easy O-Ring Replacement or Removal
- Cheap and Quick Upgrade
- Easier and Quicker than home made 'Tape' or 'Paper' Barrel Spacers
Package Includes:
- ARES STRIKER Inner Barrel Spacer - Front
- ARES STRIKER Inner Barrel Spacer - Rear
Special Instructions
Before buying please measure your Inner Barrel Exterior Dimension and Outer Barrel Inner Dimension to ensure they fit. Dimensions can be found in the product details at the top of the description. Please match the Interior Size to your Inner Barrel, and the Exterior Size to your Outer Barrel. For more help or fitting instructions please feel free to call the Workshop on: 01484 644709, or email: workshop@patrolbase.co.uk.
Specification
General
|
Internal Part Type
|
Inner Barrel Accessories
|
|---|---|
 |
Upgrade Parts
Amoeba Striker Barrel Spacers
|
Weight and Dimension
 |
Approx. 0.05kg
|
|---|
Construction
 |
Black
|
|---|---|
 |
Polymer with Rubber O-Rings
|
|
Internal Part Construction
|
Polymer, Rubber,
|
Part Specific
|
Part for Power Source Type
|
Spring
|
|---|---|
 |
Amoeba STRIKER
|
|
Package Includes
|
Barrel Spacers
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.
Similarly matched Colours
- Textured Rubber Sole
- Suede/Cordura Upper
- Lightweight & Breathable
These are the ideal boot for those looking for a mid-ground between full ankle support and all-day comfort.
- MOLLE Compatible
- For Pistol Magazines
- Holds 1 Standard Mag
A modular MOLLE pouch designed to securely store one standard sized Airsoft pistol magazine, and can be fitted to a variety of belts or rigs.
- Stuff-able Pouch
- Velcro Mountable
- Compact Pistol Use
Expand your VX Utility rig and make way for a rapid attach and removable pistol sleeve. Suited for compact pistols including G-Series firearms to keep everything close to your chest.
- Vortex Logo
- 100% Cotton
- Soft & Comfortable
A soft and very comfortable tactical T-Shirt for those who need a tough and rugged underlayer, or those who want to show their love for Vortex Optics.
- Velcro ID Panel
- Removable Strap
- 2 x Exterior Pockets
A dump pouch that can either be worn on the shoulder with the supplied removable strap as a bag, or attached to your rig/backpack via two press-stud MOLLE loops.
- 6 Pockets
- Rip-Stop Polycotton
- Integrated Knee Pads
Designed for optimum comfort in high intensity physical activity, these trousers possess a range features to enhance their practicality.
- Super Soft
- Vortex Nation Logo
- Texas State Outline
A super soft and comfortable T-Shirt from Vortex, featuring the Vortex Nation logo and the state outline of Texas.
- Elasticated Cuffs
- Full Length Sleeves
- Acrylic Thermal Fleece
A fleece that can be worn underneath rigs and vests to keep you warm during those cold winter months, or simply as a single layer in warm old England.
- Wind & Water Resistant
- Bungee Adjustable Waist
- Elasticised Cuffs With Velcro
Designed to keep you dry and comfortable on and off the Airsoft field, this fully adjustable jacket features a wind and water resistant exterior shell.
- Dual Compartment
- Ultra Compact Design
- Soft Lined Main Pocket
Small and compact utility pouch designed to be attached to belts, bags, vests and chest rigs where a MOLLE panel is available. The Pouch is constructed from heavy duty 600D Cordua.
- 100% Cotton
- Security Print
- Back / Front Print
Suitable for use at events where security staff need to be clearly identifiable, this cotton polo shirt is comfortable to wear and looks professional and smart.
- Zip Front
- Two Inner Pockets
- Reversible Inner Lining
Warm, comfortable and practical, this heavy duty nylon 'bomber' style jacket is perfect for keeping warm during the colder months of the year