- For TM M40A5
- Withstands 500FPS
- Replaces Worn Sears
An uprated Sear Set for Tokyo Marui M40A5 Bolt Action Sniper Rifles, designed for High Power Builds where the Stock Sear Set won't be able to withstand the pressures. The Sear Set is constructed from Steel, then finished with a Black Coating.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£5.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Sear set is specifically designed to be used in custom TM M40A5 Sniper Builds where higher power springs are used. Sears are used in Airsoft Sniper Rifles to hold the Piston back when the rifle is cocked, meaning all the pressure from the Spring is held on these small components, in a stock TM Rifle this is fine, as the spring is low powered, but if a higher power spring is used the force can be enough to snap them, meaning a more heavy duty alternative must be used. These sears are specifically designed to withstand those pressure's, leaving lots of room for upgrades, and great for combining with Action Army's other upgrade parts. These Sears are perfect for those Airsoft Skirmishers who are looking to upgrade their Tokyo Marui M40A5 Rifle, and want to push it past the Japan Friendly 350fps, up to UK Site Legal 500fps, with no worry of damage to the rifle from the high power components, or for those who simply want to replace their old or warn out sears.
Features:
- For the Tokyo Marui M40A5 Bolt Action Sniper Rifle
- Solid Steel Construction
- Perfect Upgrade for High FPS / High Power Sniper Builds
Package Includes:
- M40A5 Marui System Steel Sear Set
Specification
General
|
Internal Part Type
|
Sears
|
|---|---|
 |
Upgrade Parts
|
Weight and Dimension
 |
Approx. 0.15kg
|
|---|
Construction
 |
Black
|
|---|---|
 |
Steel
|
|
Internal Part Construction
|
Steel
|
Part Specific
|
Part for Power Source Type
|
Spring
|
|---|---|
 |
M40A5
|
|
Package Includes
|
Sear Set
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.
Similarly matched Colours
- Textured Rubber Sole
- Suede/Cordura Upper
- Lightweight & Breathable
These are the ideal boot for those looking for a mid-ground between full ankle support and all-day comfort.
- MOLLE Compatible
- For Pistol Magazines
- Holds 1 Standard Mag
A modular MOLLE pouch designed to securely store one standard sized Airsoft pistol magazine, and can be fitted to a variety of belts or rigs.
- Stuff-able Pouch
- Velcro Mountable
- Compact Pistol Use
Expand your VX Utility rig and make way for a rapid attach and removable pistol sleeve. Suited for compact pistols including G-Series firearms to keep everything close to your chest.
- Velcro ID Panel
- Removable Strap
- 2 x Exterior Pockets
A dump pouch that can either be worn on the shoulder with the supplied removable strap as a bag, or attached to your rig/backpack via two press-stud MOLLE loops.
- 6 Pockets
- Rip-Stop Polycotton
- Integrated Knee Pads
Designed for optimum comfort in high intensity physical activity, these trousers possess a range features to enhance their practicality.
- Super Soft
- Vortex Nation Logo
- Texas State Outline
A super soft and comfortable T-Shirt from Vortex, featuring the Vortex Nation logo and the state outline of Texas.
- Elasticated Cuffs
- Full Length Sleeves
- Acrylic Thermal Fleece
A fleece that can be worn underneath rigs and vests to keep you warm during those cold winter months, or simply as a single layer in warm old England.
- Wind & Water Resistant
- Bungee Adjustable Waist
- Elasticised Cuffs With Velcro
Designed to keep you dry and comfortable on and off the Airsoft field, this fully adjustable jacket features a wind and water resistant exterior shell.
- Dual Compartment
- Ultra Compact Design
- Soft Lined Main Pocket
Small and compact utility pouch designed to be attached to belts, bags, vests and chest rigs where a MOLLE panel is available. The Pouch is constructed from heavy duty 600D Cordua.
- 100% Cotton
- Security Print
- Back / Front Print
Suitable for use at events where security staff need to be clearly identifiable, this cotton polo shirt is comfortable to wear and looks professional and smart.
- Zip Front
- Two Inner Pockets
- Reversible Inner Lining
Warm, comfortable and practical, this heavy duty nylon 'bomber' style jacket is perfect for keeping warm during the colder months of the year
- Drawstring Hood
- Front Pouch Pocket
- Sleeve Thumb Holes
Perfect for keeping warm and comfortable, this hoodie is constructed from durable Polyester fabric and features a variety of practical features.