Airsoft MOSFETS

If you want to unlock more functionality from your Gate ASTER or TITAN MOSFET, the USB Link from Gate is exactly what you're after! This dongle attaches to your AEGs Deans battery connector and allows you to connect it via micro-USB or USB Type C to your Android device, Windows PC or Mac and control diagnostics, trigger sensitivity, burst modes, rate of fire adjustment and all the other fantastic features built into the ASTER and TITAN ETUs. Unlock the full potential of your Gate TITAN or ASTER and give yourself the edge in battle!

The Gate TITAN™ / ASTER™  Blu-Link allows for wireless management and connectivity to your Airsoft Gun. By connecting the Blu-Link in series to your TITAN™ and/or ASTER™, you will be able to control all aspects of your favourite MOSFET remotely from your Android or iOS device; with support eventually coming for Windows and macOS. This device can be left plugged into your Gun, and there is no need to remove it for skirmish, allowing you to make changes and program settings on the go.

A drop in MOSFET Kit designed for Rear Wired Version 2 Gearbox, which are typically seen in M4 Variant Rifles. This variation of the Kit comes with the MOSFET Unit and the USB-Link. This light version of the kit does not include the tactical programming card.

A drop in MOSFET Kit designed for Rear Wired Version 2 Gearbox, which are typically seen in M4 Variant Rifles. This variation of the Kit comes with the MOSFET Unit and the USB-Link. This light version of the kit does not include the tactical programming card.

The NanoAAB MOSFET from Gate Electronics is one of the smallest "plug 'n' play" MOSFETs with Active Braking on the market today.

Generation 3 Micro Computer Programmable Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. 

An ultra compact Generation 3 MOSFET built to be as compact as possible, requiring the smallest amount space possible, and is water resistant. 

Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space possible, and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C.

A Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C. 

A complete unit to fit into any Airsoft AEG no matter what version gearbox you own. Included is everything from MOSFET to wiring, connectors and programming card.

A drop in MOSFET Kit designed for Tokyo Marui NGRS Recoil Shock Systems, such as the NGRS M4, and the NGRS SCAR. This variation of the Kit comes with the MOSFET Unit, the USB-Link, and is the Advanced version with unlocked features.

A programming button designed to give you a bit more control of your GATE MOSFET, which is also compatible with other brands.

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. 

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

Turn your AEG into a TITAN with Gate's new flagship electric trigger unit (ETU), the TITAN II Bluetooth for Rear Wired V2 Gearbox with Basic Firmware.

Built-in Bluetooth 5.2 technology gives you direct access to the TITAN's settings on the fly, using AEG telemetry to allow you to use your smartwatch, STATUS and other future devices in the Gate ecosystem of devices.

The innovative gear sensor not only counts each tooth but also as the first in the world determines the direction of a gear's rotation, offering you the most precise of cycle controls in AEGs.

With mind-blowing optical trigger sensor, the TITAN II allows you  to set your hair trigger with ludicrous precision, with a whopping 50 sensitivity levels for the first millimetre of trigger movement.

The TITAN II is equipped with a multifunctional port ready for connecting additional accessories such as bolt-catch, magazine sensor, tracer in hop-up chamber and others.

A drop in MOSFET Kit designed for Version 3 Gearbox, which are typically seen in AK and RPK Variant Rifles.