Airsoft Grips & Stocks

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.

If you are after a grip that is not quite as angular as most angular foregrips, but it's not perfectly vertical, you have found it! The Tactical Angled Grip from NUPROL mounts to any 20mm Picatinny rail, and provides a comfortable angled pistol grip style foregrip which sits in your hand like it was designed to do it (and it was)! The grip is constructed from high density polymer and is secured to your rail with a steel bolt. The grip is ergonomically shaped to fit all hands, is incredibly comfortable to hold, and would fit perfectly with any modern rifle or primary pistol build!

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

This stubby Foregrip is constructed using CNC Machined 6061 Aluminium for a superior finish, and is designed to provide a stable aiming position whilst also remaining compact and reduce snagging on your own equipment. It has an integrated 20mm Rail attachment and will easily fit to RIS/RAS Rail Systems. There is also a secret storage compartment inside the grip, accessed by unscrewing the base. If you're looking for a Russian style Foregrip for your AK or even Western Rifles, the 5KU Aluminium Russian Grip will fit the bill nicely.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

If you want to add a grip to your railed AK platform but want to keep it Russian, this is the grip you need! The 5KU Aluminium Russian Compact Foregrip; 20mm Picatinny is constructed from aluminium with a ribbed external design to improve handling and add traction. Inside the grip, we are also treated to a storage compartment designed for CR123a batteries, though you can store other items inside (we use ours for sweets). 

This grip is based on the popular Zco-style vertical grip often seen on styled-up AK platforms with other Zco furniture. If you want to add modern attachments to your railed AK but want to keep it purely Russian, this grip belongs on your gat!

A compact, stubby and seriously tough Foregrip for 20mm Rails, made from CNC Aluminium with a textured surface to provide better stability when aiming.

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.