Airsoft Grips & Stocks

A futuristic stock for M4 platform Airsoft Electric Guns, which replaces a standard Pistol Grip and Sliding Stock with this Ready Mag System, complete with Sliding Stock function and QD Sling Loops.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

A Steel constructed replacement Receiver & Folding Stock for the LCT M70AB2 Airsoft Electric Gun, which features a Stamped Steel receiver and Steel Underfolder Stock, complete with Sling Loop.

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

If your AK buttstock is too slippery and is hard to shoulder when wearing a tactical vest this is what you need! The Element Rubber Butt Pad for AK47/74 is designed to slip over either AK fixed stocks or the AK74 side folding skeleton stock and provide enhanced grip for poor weather conditions and make the rifle easier to shoulder effectively with modern tactical gear. This butt pad is a copy of the real Izhmash AK butt pad which was issued to the Soviet and Russian Militaries, so would be a great choice for a Milsim build.

Infinitely functional and incredibly comfortable. Dubbed the Heavy Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece. With a rubberised butt plate for comfort when held against your person, this stock goes even further than that! This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

Although branded as 'Heavy Ops' this stock, it's anything but, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. The rubberised butt plate is removed by pushing together the two side pins revealing the battery compartment within. The compartment is wide enough to house a crane stock battery and with an inner length of roughly 17cm, you have ample room to house larger batteries for longer gameplay. The slide adjuster is also widened and textured for ease of adjustment, making you ready for any situation.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

If you like minimalist accessories with loads of functionality, this grip should suit you! The M-ETAL Angled Foregrip; M-LOK & KeyMod is a hybrid design, functional as both a low-profile angled foregrip or a hand stop and mounts to both KeyMod and M-LOK negative space attachment interfaces. This lightweight, skeletonised grip is constructed from aluminium with steel mounting hardware and weighs in at a microscopic 30g, meaning you can enhance handling without adding excess weight. 

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

If you want to run your Specna Arms PDW stock-equipped rifle all day, this is what you will need. With a considerable amount more room than the original battery tube, this tube can take up to a 7.4v 1450mAh LiPo battery.

Is your AR stock too long? Maybe you carry a PDW AR15 AEG as a secondary but don't fancy the additional weight of a PDW sliding stock? The CYMA ultra-compact M4 stock may well be what you have been searching for.

This fits on a normal AR15 buffer tube but is optimized for use with a shortened buffer tube, making it even more compact. The butt plate can be removed similarly to a full-sized crane stock if you have a small enough battery to fit inside this lil' guy! This would also work well with a battery sling.