Refine results
Refine by
Viewing 30 of 55.
grid
list
  • 2 x Ventilation Holes
  • Exceptional CNC Steel
  • Longer Nozzle Than Standard

An upgrade or replacement cylinder head for 6mm BB L96 models that is appropriate for both uprated and stock Airsoft sniper rifle cylinders.

£11.79
  • Steel Construction
  • 3 Piece Bearing Base
  • 7mm To 9mm Adapter

A spring guide with bearings for VSR/BAR 10/MB-03 Airsoft spring powered rifles.

£15.99
  • Stainless Steel
  • Ready To Drop In
  • All Parts Included

A drop in replacement of slightly sturdier materials than the standard bolt of your WELL series sniper rifle.

£49.99
  • Hard Silicone
  • U Shape Hop Patch
  • For 0.40g BBs & Higher

To be used with heavy weight BBs to increase your Airsoft sniper rifles range and accuracy, this bucking has been designed specifically for the VSR / BAR-10 Airsoft sniper rifle series. 


£4.99
  • For 0.40g +
  • Extra Large Patch
  • For VSR-10 / Unbridged

A 75 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy.

£8.95
  • 250mm Long
  • Fits Other Sniper Rifles
  • Fit 7.5mm Spring Guides

High powered spring designed to give a little boost to your Airsoft spring sniper rifle or lower the fps to a safe limit depending on what is already installed.

£9.99
  • Stabilizes Barrels
  • Improve Accuracy
  • For TM G-Spec Rifle


    A pair of Barrel Stabilisers designed to prevent barrel wobble in Airsoft Tokyo Marui G-Spec Sniper Rifles, increasing the accuracy and consistency of your shots. The Barrel Stabilisers are constructed from Polymer and feature removable Rubber O-Rings, and are designed to be easier and quicker to use than traditional Tape or Paper Barrel spacers.

    £14.95
    • Shorter Than Standard
    • For VSR-10 & M28 rifles
    • 2 Hop Rubbers Per Pack

    Next level of Airsoft sniper rifle hop-up rubber produced with similar materials and processes to Madbull's current line up of AEG hop-up components. 

    £14.99
    • Stainless Steel Construction
    • Bearing Filled Base
    • For Striker S1

    A purpose built 2 part Spring Guide, designed to Improve the Performance of ARES Striker S1 series of Bolt Action Airsoft Spring Sniper Rifles. Precision manufactured from Stainless Steel, this complete set features both the Spring Guide Shaft, and the Bearing Base. 

    £19.99
    • CNC Machined
    • Must Have Upgrade
    • Stronger Than Standard

    An absolute must have upgrade for any Tokyo Marui or Well AWS/MB44xx series rifle that uses a loading ramp mechanism.

    £24.99
    • CNC Machined
    • Upgrade Piston
    • 45 Degree Piston


      An upgrade piston for Tokyo Marui M40A5 Bolt Action Sniper Rifles. The Piston is constructed from CNC Machined Aluminium with Polymer Guide Rings, and Rubber O-Rings.

      £29.95
      • Upgrade Piston
      • CNC Machined
      • 45 Degree Piston

      An upgrade 45 Degree piston for Tokyo Marui Base / CYMA / JG VSR / BAR-10 Rifles, and Well MB-03 Sniper Rifles. The Piston is constructed from CNC Machined Aluminium with Polymer Guide Rings, and Rubber O-Rings. The Piston is constructed using a CNC Process making it durable and precise, and is ported to reduce its weight.

      £29.95
      • Stainless Steel Construction
      • 8 Ventilation Holes
      • For Striker S1

      A purpose built Piston, designed for use with the ARES AMOEBA Striker S1 series of Bolt Action Airsoft Spring Sniper Rifles, to improve their performance durability.

      £44.99
      • For TM M40A5
      • Withstands 500FPS
      • Replaces Worn Sears

      An uprated Sear Set for Tokyo Marui M40A5 Bolt Action Sniper Rifles, designed for High Power Builds where the Stock Sear Set won't be able to withstand the pressures. The Sear Set is constructed from Steel, then finished with a Black Coating.

      £59.95
      • Alloy Construction
      • Spring & Pin Included
      • Perfect Spares / Relplacement

      Keep your hop settings unchanged, even in the most demanding of firefights with Maple Leaf's VSR Chamber Click Pin. This pin is responsible for keeping an even and consistent pressure on the hop rubber, making sure there's no movement of settings during firing.

      £3.49
      • Easy To Install
      • Rubber Flat Surface
      • Improved Hop Performance

      When combined with the Maple Leaf adjustment arm this creates a flat contact patch. 

      £6.99
      • For 0.40g +
      • Extra Large Patch
      • For VSR-10 / Unbridged

      A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

      £8.95
      • For 0.40g +
      • For VSR-10 / Unbridged
      • Diamond Shaped Patch

      A 75 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy.

      £8.95
      • Enhanced FPS
      • VSR-10 Compatible
      • High Quality Spring

      A spring designed and manufactured by Action Army for VSR-10 / BAR-10 and G-Spec bolt action spring sniper rifles and the many other VSR compatible designs.

      £9.95
      • Enhanced FPS
      • VSR-10 Compatible
      • High Quality Spring


        A spring designed and manufactured by Action Army for VSR-10 / BAR-10 and G-Spec bolt action spring sniper rifles and the many other VSR compatible designs.

        £9.95
        • Enhanced FPS
        • High Quality Spring
        • Marui M40A5 Compatible

        A spring designed and manufactured by Action Army for Tokyo Marui's M40A5 spring Airsoft sniper rifle. The spring is one of, if not the most important internal component of Airsoft bolt action sniper rifles, and if you're looking to enhance the performance of your sniper, changing the spring is one of the first things you should look at.

        £9.95
        • TM VSR-10 Compatible
        • High Quality Spring
        • Enhanced FPS

        A spring designed and manufactured by AirsoftPro specifically for Tokyo Marui type VSR-10 bolt action spring sniper rifles and the many VSR compatible designs. 

        £9.99
        • Nickel Plated Steel
        • Upgrade VSR / BAR-10
        • For AirsoftPro Parts

        AirsoftPro - VSR / BAR-10 Sniper Rifle Steel Cylinder Head - Silver is a replacement Cylinder Head designed to fit the AirsoftPro Cylinder within Airsoft VSR / BAR-10 Rifles when upgrading to use Airsoft Pro Internal Upgrades. The Cylinder Head is constructed from Steel, which has then been nickel plated to give the Cylinder a hard wearing finish and features a tapered Nozzle for better Air Flow and Consistency. The Cylinder is designed to work flawlessly with AirsoftPro's VSR upgrade range, and is compatible directly with their AirsoftPro VSR / BAR-10 Nickel Plated Steel Cylinder. This Cylinder Head is perfect for those who are upgrading their TM VSR / BAR-10 with AirsoftPro upgrade parts and accessories.

        £10.60
        • Pack Of 6
        • Fits To Cylinder Head
        • May Reduce FPS Slightly

        Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

        £10.99
        • Stabilise Shots
        • Improves Air Seal
        • Reduce Power Loss

        An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

        £13.95
        • Stabilizes Barrels
        • Improve Accuracy
        • For VSR / Bar-10 Rifle


          A pair of Barrel Stabilisers designed to prevent barrel wobble in Airsoft VSR / VSR-10 Sniper Rifles, increasing the accuracy and consistency of your shots. The Barrel Stabilisers are constructed from Polymer and feature removable Rubber O-Rings, and are designed to be easier and quicker to use than traditional Tape or Paper Barrel spacers.

          £14.95
          • For VSR / BAR-10
          • CNC Machined Part
          • For AirsoftPro Parts


            A replacement Hop-Up Arm for TM and Clone, and are CNC machined from Aluminium to make a longer lasting and more precise part. 

            £14.99
            • 2mm Thick Rings
            • Heat Treated Steel
            • Fits 7.5mm Spring Guides

            Laylax - PSS10 Spring Tensioner 6pcs, 2mm thick spacers designed to pre-compress your spring slightly to increase the FPS of your sniper rifle. 

            £14.99
            • Stabilizes Barrels
            • Improve Accuracy
            • For ARES Striker Rifle


              A pair of Barrel Stabilisers designed to prevent barrel wobble in Airsoft ARES AMOEBA STRIKER Sniper Rifles, increasing the accuracy and consistancy of your shots.

              £15.95
              • Barrel Spacer Mod
              • Quick and Easy Fit
              • Increases Accuracy

              A part placed inside the outer barrel of the Tokyo Marui VSR-10 Pro, designed to hold the inner barrel stable even whilst moving to provide a more accurate and stable shot. 

              £15.99