- Stippled
- Low Profile
- Small Compartment
A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.
- Stippled
- Low Profile
- Small Compartment
A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.
- Easy To Mount
- Lightweight & Durable
- Internal Hidden Storage
A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.
- Easy To Mount
- Lightweight & Durable
- Internal Hidden Storage
A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.
- Angled grip
- High-density polymer construction
- Shorter than most - Perfect for short rail systems
The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.
- Easy Installation
- Threaded End Cap
- Aluminium Construction
An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.
- Distinctive Skull Logo
- 14mm CCW Threads
- 196mm Long
Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds.
- For 20mm Rails
- Textured Surface
- Easy to Use Screw
A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.
- For 20mm Rails
- Textured Surface
- Easy to Use Screw
A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.
- Spring Core
- Interior Foam
- Aluminium Shell
A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.
- Attaches to any M4 style flash hider
- QD design - Can be removed in seconds
- External vents keep the suppressor lightweight
Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout.
- Pack of Four
- 16cm In Length
- For 20mm RIS Rails
Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.
- Pack of Four
- 16cm In Length
- For 20mm RIS Rails
Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.
- 14mm CCW Thread
- Accurate Markings & Insignia
- Covers Extended Outer Barrels
An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor.
- For EOTech
- Transparent
- Protect Sights
A transparent Polymer lens protector designed for EOTech Style Sights, protecting your Sight from BB's and other projectiles designed as a first defence, protecting your lens.
- 14mm CCW Thread
- Accurate Trademarks
- Foam Filled Suppressor
A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.
- CW & CCW Thread
- Blackwater Logo
- Foam Filled
An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.
- Rubber Inlay
- Compact Grip
- For M-LOK Rails
A short and stylish foregrip for M-LOK rail systems with a rubberised inlay, which will give you a sturdy and comfortable platform to brace your rifle and improve your stability when shooting.
- 14mm CCW Threads
- Unique Zombie Hunter Logo
- Can Be Used As Barrel Extension
A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia.
- Lightweight Design
- Finger Ridge Surface
- AEG Compatible Replacement
A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip.
- Lightweight Design
- Finger Ridge Surface
- AEG Compatible Replacement
A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip.
- Four-Point RIS
- Fits AEG & GBB
- MK18 Handguard
A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.
- 14mm CCW Thread
- Accurate Trademarks
- Foam Filled Suppressor
A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor.
- Easy To Install
- Fits Many AEGs
- Adjustable Sliding
A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable.
- Textured Grip
- Extends Down
- Folding Foregrip
A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.
- Vented Base
- Screws included
- Large adjustment screw
An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips.
- For KeyMod Rails
- Quick Detach System
- Tough Alloy Construction
A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.
- Extension Piece
- 14mm CCW Thread
- Aluminium Construction
An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.
- Polymer construction
- Non-functional PEQ-15 Battery box
- For 20mm Picatinny rails
Whether you want to give your AEG a more elite look or you need space for a battery the Big Dragon AN/PEQ-15 Dummy Battery Box will do the trick! This dummy PEQ-15 unit is designed to look exactly like the real thing and has enough space inside to fit a battery measuring approximately 6.5x4.5cm. Included in the set is a set of realistic laser warning stickers for a more realistic look, with various colour schemes available so you can pick your favourite. This battery box mounts to 20mm Picatinny rails and is great for a front-wired AEG setup with limited space inside the handguard.
- 20mm RIS Compatible
- Spring Powered Bipod
- Press Button To Deploy
A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.
All External Parts
Go Bespoke With Your Replica
Getting your airsoft gun is just the start of it - once you get to know what sort of replica you want, you can go ahead and fully customise it with our selection of airsoft parts. From mounts to grips and everything in between, you won’t find a better offering in the whole of the UK.
Plus, we offer next day delivery for all our online shoppers with UK mainland addresses, and even international delivery so if you’re overseas but spot something you like on our site, we’ve got you covered.
Don’t stop here, either. Explore all of the airsoft attachments and accessories we have on offer, including airsoft optics, flashlights and torches, airsoft batteries and more.
Shop our full selection online today or visit us at our store in Huddersfield where you can get an in-person feel for what’s right for you.