Airsoft Magazines

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

If you have an SMG-5 and have caught straight mag fever no need to fret, we have the cure! The CYMA 120rnd Straight Mid-Cap Magazine For SMG-5/CM.106 AEG will give your SMG-5 AEG a whole new look similar to the legendary MP5-10, the 10mm version of the iconic SMG we all know and love.

These magazines are constructed with a steel shell, polymer internals and a steel feed spring and can be loaded with a speedloader or loading rod through the fill/feed port on the top of the magazine body. Compatibility-wise, these mags should work in the vast majority of SMG-5 AEGs out there, the CYMA CM.106 AR-9 AEG and most SMG-5/MP5 HPA magazine adapters for pistols. If you need a new look and new mags for your SMG-5 you can now hit two targets with a single BB!

Looking for the most size efficient high-cap for M4/AR15 Airsoft AEGs? This high-cap magazine from CYMA somehow sneaks an extra 100 rounds inside, bringing the capacity of this magazine up to a massive 400 BBs! This magazine is the same length as a standard M4/AR15 AEG magazine but features a revised curve matching the real "416 Enhanced Steel" magazine. Using this magazine is one of the best ways to maximise your battlefield capacity without using bulky drum or box magazines that may inhibit your swift movement. The magazine is constructed with a steel shell and polymer internals and can be filled through the fill window at the top of the magazine. This is a wheel wound high-cap magazine, and the winding wheel is located on the magazine's base plate.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

Looking for AK magazines for a modern, tactical AK AEG? The CYMA 130rnd Reinforced Polymer Magazines have the looks you need, with some enviable functionality built in. These magazines have a ribbed exterior body which both strengthens the shell and provides gripping surfaces for better control over the mag in wet weather, and are constructed from rough textured reinforced polymer. The baseplate is also ribbed and flared out to allow better grip when ripping the mag from a pouch when you are reloading in a hurry.

This is a replica of a modern AK magazine design known as the "Intrafuse", and would suit a modern tactical 5.56 or 5.45 style AK build perfectly but will fit and feed in AK AEGs of all stripes. This magazine is a spring fed mid-cap which is loaded using an Airsoft speed loader or loading rod through the fill/feed port on the top of the magazine.

Looking for AK74 magazines for a Soviet-era loadout? The 150rnd Mid-cap in Bakelite Orange from CYMA is constructed from polymer which is dyed to match the Bakelite magazines issued with the earliest variants of the AK74 rifle to the Soviet Army. This magazine is a spring loaded mid-cap and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74 or AKS74U AEG but will fit and feed in most AK platform AEGs.

A replacement magazine for CYMA Brand VSR Bar 10 Rifles, such as the CM701 Range. The magazine is constructed fully from Polymer with an Alloy Spring. 

Looking for extra magazines for your Dragunov AEG? The CYMA 100rnd Mid-cap will do the trick! This magazine is designed for the CYMA CM.057 series and holds 100 6mm BBs which can be loaded using a speed loader through the fill/feed port at the top of the magazine body. The outer shell of the magazine is constructed from stamped steel to give a realistic look and feel, complete with stamped in strengthening ribs, just like the real SVD/SVU mag.

A medium capacity spring-fed magazine for ASG and CYMA branded Airsoft Electric M14 series rifles that holds a total of 200 rounds.

A spare magazine designed for CYMA SMG-5s, and compatable SMG-5 AEG Airsoft Electric Guns.

A replacement magazine for Airsoft AK47 / 74 AEG, which are based off Tokyo Marui Style designs, such as the CYMA AEG.

A replacement magazine for Airsoft AK47 / 74 AEG, which are based off Tokyo Marui Style designs, such as the CYMA AEG.

For those of you that prefer a more classic AK style, this magazine sports the old school Bakelite look for a more authentic loadout. The magazine holds 450 rounds and is a high-cap design in that it is wheel-wound at the bottom, meaning that you can get a tonne of shots in without having to swap mags.

The magazine also features a ridged texture on the front of the mag to allow for better grip when loading/reloading.

A 500rnd High Capacity Magazine for AK Platform Airsoft Electric Guns, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

A stubby low capacity magazine meaning you can move at speed with no rattle.

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

An incredibly imposing drum magazine that holds a whopping 550 rounds, and is constructed from a dense Alloy for a tough and long-lasting finish. Providing the Thompson M1A1 CM.033 with the classic Gangster-Gun aesthetic that we've infamously come to know and love. 

A compact magazine for your Airsoft AEG AK47 or 74 series rifle.

A replacement magazine for the CM.128 AEP Electric Pistol which is designed to fit into the pistol and be used to carry extra rounds into the game meaning you don't have to stop mid game to use a fiddly speed loader.

A 34rnd spare magazine for the CYMA CM.128 Hi-Capa styled Airsoft Electric Pistol, which will work with other CYMA AEPs but will extend beyond the baseplate depending on the model. It is filled from the top using a Speedloader to push BBs past the feed lips.

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

If you are rocking a modernised AK AEG these magazines will suit it well! The CYMA 140rnd "Waffle" Mid-Cap Magazine for AK AEG is patterned after real steel Bulgarian AK-47 magazines also sold in the US under the brand "Circle 10". The magazine has waffle texture on the outside to promote positive grip and is constructed from rigid high density polymer, meaning an accidental drop doesn't result in scratches! If you need AK mags for a PMC or modern mercenary loadout, these are perfect!

A spare magazine for the CM.121 and CM.121s which holds a total of 30rnds, and is a necessity when purchasing one of these replicas as they don't take standard AEP mags. It is loaded with BBs from the top of the magazine using a Speedloader.

A Low Capacity Magazine designed for M14 AEG, where the player wants a magazine with a more realistic capacity. The Magazine is constructed from Alloy, with Polymer internals. 

For you AK wielders looking for more mags, this is for you. Constructed from high density polymer the magazine features a rugged design, with ridges to assist with grip and reloading. The magazine holds up to 150 rounds, and is a mid-cap design, meaning the magazine is filled from the top with no requirement to wind the magazine to feed.

This style of magazine is best filled with a speed loader, and is perfect for those Airsoft Skirmishers who are fed up of winding up their Hi-Cap magazine, or want a more realistic experience by having to reload their weapon. These magazines are great for those who quickly want to bulk up their magazine collection, by being low cost yet durable.

A large high capacity magazine for AK47/AK74 models, holding up to 550 rounds at one time.