ARES Airsoft

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

Keep the weight of your bipod-equipped rifle down with this featherweight M-LOK mount from ARES. This mount enables you to add Atlas-style bipods to your M-LOK front end. The Atlas style of bipod mounts using a large cylindrical lug and is often seen on L96s and variants in British army service. 

A drop-in fit OEM manufactured replacement handguard, compatible with the Amoeba range of M4s, from AM002 through to AM006.

A replacement Grip and Cheek Pad Replacement set which allows you to replace the stock parts with upgraded parts. 

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series is uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit, and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. This AEG's external build quality is exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!

A  Airsoft medium capacity magazine, providing a large ammo capacity, allowing you to shoot for longer without winding any form of wheel / steel cord.

A pair of KeyMod Rail panels, designed to be attached to KeyMod Railed Hand Guards and provide a Hand Stop point, using it to stop your hand from sliding down the front of the Handguard and stopping over reach.

A 20mm RIS rail section that is compatible with the KeyMod Rail system, designed to be attached to KeyMod Railed Hand Guards and Provide a 6" 20mm RIS Rail for attaching various accessories.

Looking for rails for your M-LOK handguard but want to minimize added weight? These Amoeba M-LOK rails are perfect for your needs. After all, what is the point of having an ultra-light rail system without ultra-light rails with which to add your tacticool mission essentials? Each of the two included rail sections are 3.5" in length and provide 7 rail slots with which to mount your Picatinny gear. 

Looking for rails for your M-LOK handguard but want to minimize added weight? These Amoeba M-LOK rails are perfect for your needs. After all, what is the point of having an ultra-light rail system without ultra-light rails with which to add your tacticool mission essentials? Each of the two included rail sections are 3.5" in length and provide 7 rail slots with which to mount your Picatinny gear. 

A threaded extension for Ares Striker sniper rifles which will add an extra 2cm to your outer barrel.

A 38rnd capacity magazine for the AS02 and AS03 Ares Amoeba Striker Sniper RIfle.

An OEM factory replacement magazine release for the AMOEBA AM-013 / AM-014 series of Airsoft electric guns. This particular magazine release is the lengthened, extended version. 

This red dot sight mount plate is compatible with the Ares SC-016 micro red dot sight and allows it to be mounted above the Ares SC-015 rifle scope in a "piggyback" manner. The plate is constructed from CNC machined aluminium and includes two mounting bolts and an Allen key.

A large Airsoft 6mm BB Gun M4/15/16 Magazine which will allow you to command the battle field and keep the enemy's head down with an awesome 900 round capacity magazine without carrying a bulky and cumbersome box mag.

A large Airsoft 6mm BB Gun M4/15/16 Magazine which will allow you to command the battle field and keep the enemy's head down with an awesome 900 round capacity magazine without carrying a bulky and cumbersome box mag.

A replacement High Capacity Magazine designed by ARES for their L1A1 SLR AEG Rifle.

Say goodbye to STANAG! A magazine-well adaptor that allows you to turn your Airsoft M4 AEG into something a little bit different, an Airsoft replica of the 9mm M4/M16s. 

A replacement or upgrade circuit board for the ARES Amoeba EFCS gearbox system.

Looking for a bipod for your M-LOK equipped rifle but don't want the additional weight of using a Picatinny Bipod? You can skip the rails with this Amoeba Bipod, which attaches directly to M-LOK rail systems. 

A High Power, High Torque Motor, which is a great replacement for Stock or Damaged Motors. ARES have created these motors as a direct replacement for any AEG which uses a Long Shaft motor, however as this motor is designed for High Torque output, please ensure that your Airsoft AEG Gearbox is set up for High Torque operation. 

If you need to replace a worn out or damaged motor, or are simply interested in tinkering with your Airsoft AEG improve its performance, these ARES manufactured High Torque motors are an excellent choice.

Looking for DMR-style parts for the impressive new Ares AR-308? This suppressor is designed to attach to the Ares Muzzle brake mounted to the barrel of the AR-308 series, and sports quick detach functionality. The suppressor is constructed from aluminium with a matt black finish applied and includes laser engraved markings for a realistic look. This suppressor is only compatible with the Ares AR-308 muzzle brake via its QD attachment and is not threaded.

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

A PDW style Airsoft 6mm AEG, and is unique to Airsoft, and is specifically designed for that purpose. This variant is constructed entirely from Polymer