BOLT BY-100439 - DEVGRU B4 Extension; Two-tone Red

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you. 

An upgraded optic over the traditional standard 3-9x40 alternative. The E version comes with illumination settings with adjustable Red levels of brightness. Also included is a 5cm long sun shade that comes pre fitted within the box. 

A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity. 

Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.

High quality medium-weight 0.28g Airsoft BB Ammunition, suitable for both indoor CQB Airsoft and outdoor open environments. 

These BBs are perfect for any Airsoft Skirmisher looking to up their gameplay without having to invest time and money into upgrading and modifying their Airsoft gun, in addition to those looking for their next go-to brand of BB, and for those looking for a more reliable and consistent BB.

This is a spare or replacement CO2 Cradle for the Tippmann Omega PV Series with a CO2 Stock. It holds two 12g CO2 Sparklets which lasts for hundreds of shots, but will need refilling with CO2 once empty. Having a spare allows you to quickly change out the cartridge rather than opening it up and replacing the CO2 Bulbs. This is a direct replacement, that is exactly the same as the one supplied in the original box. If you want to stay in the field playing for longer, rather than sacrificing your sweet position and returning to the safe zone, then this is a must-have purchase.

A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.

Abbey Predator Ultra GAS is the perfect propellant for any gas weapon from pistols to high tech sniper rifles. It contains UPL+ lubricant which is designed to stay permanently mixed with the propellant.

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an autowinding design which requires 3x AAA batteries to operate. 

An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.

A robust and reliable Red Dot Sight for Airsoft Guns that have a 20mm Rail System. Supplied with both a High Profile and Low Profile Mount, this Sight features a 3MOA Target Dot with seven Brightness Levels, one of which is dim enough for Night Vision Devices.

NUPROL's latest offering into the Airsoft Market with newly designed BBs made to be more accurate and consistent than ever before.

Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are BIO 0.20g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play. 

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you. 

Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

A bottle of 3300 BBs which are constructed from PLA (Polyactide), have a tolerance of 0.01mm +/- for excellent consistency, and go through a multi-polish process to ensure a perfect finish. They are manufactured to be as accurate as possible, with less than 5% air bubbles for a very precise centre of gravity which will help achieve consistency when firing. They are supplied in a square screw top bottle and have an individual weight of 0.28g. These BBs can be lifted harder using your HOP unit than lighter BBs and are ideal for high end Airsoft AEG shooting 330fps plus or for those with an upgraded Hop-up unit.

A 12g CO2 Bulb Capsule Single, sold individually these 12g bulbs can be used for both Airsoft and Air rifles.

Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.

What everyone has been waiting for: a BB for the poor few whose hop units are still lifting 0.4g BBs like no tomorrow! We have tested these so far in several barrels including standard, 6.03, 6.02 and 6.01 and we so far haven't encountered a single jam.

This G&G CM16 LMG Box magazine was returned to us due to feeding issues. The issue reported is that the magazine only winds intermittently and also has issues with the cutting off when the magazine is wound. Externally the magazine looks good, with no signs of damage. This magazine does not come with batteries or a charger, but takes 2x rechargeable CR123a. Could be useful for a tinkerer!

This PTS Syndicate Mega Arms .308 rifle was returned to us due to an issue with the HOP unit, which is broken. The barrel nut will also need replacing due to damage during disassembly. The rifle has some scratches on the receiver rail from mounting optics, as well as some small marks around the mag well from insertion of the magazine. There are some scratches on the outer barrel and gas block, also from disassembly. The two tone paint is worn in some places but is intact, for the most part. This rifle will require spare parts from PTS to function again. 

This Golden Eagle Type 870 was returned to us due to a leak between the receiver and pistol grip. The gas tank itself is gas-tight, and the leak is in the gun itself. The mock magazine tube extension has also been snapped. The shotgun is decent externally, with some scratches on the left side of the receiver and some more minor scratches on the underside of the magazine tube. This would still make a good wall hanger, but could be repaired by someone with the patience for these complex internals!

This P14 was returned to us due to an apparent nozzle issue in that it occasionally jams. It has been tested and it cycles and feeds perfectly fine, however be aware that this nozzle issue may possibly reappear.

Cosmetically the pistol is in great condition, with only a slight scratch on the safety lever. So grab yourself a bargain with this great aluminium side arm.

This ASG Shadow C02 pistol was returned to us with a wobbly/detachable front site. Potentially all it takes is a bit of metal glue and some patience to have it aiming as intended. Being that the item is a two tone, there is no UKARA needed to purchase and get stuck in!

Aside from the front site and two tone paint job this SP-01 Shadow is like new! Though be aware that is that is has not been tested and will require C02 bulbs.

This Umarex G36c EBB was returned to us due to a loose fire selector, and a rattle from inside the gun which we are not able to identify. The AEG still works fine, including its 2 round burst function and the electric blowback. The box has a tear in its lid, but the AEG itself has no external marks or wear other than a tiny bit of finish has been worn off on the right side (as installed) of the flash hider. 

This Jing Gong M14 EBR was returned to us due to the mock bolt being stuck at its rearmost point of travel. The AEG still works fine on the inside, but has a few other external issues. The dummy gas tube below the barrel wobbles, though this may just need tightening up. The stock sliding/locking mech works intermittently, and we suspect maybe a part inside was badly installed and could possibly be fixed by a tech with some know-how. There are also a few tiny scratches beneath the stuck mock bolt, and some near the bolt release catch on the other side. Potentially a good project gun!

A returned two tone red Biohazard M92. There is an issue where sometimes it will double feed on the semi auto setting. Besides that the pistol has been tested and cycles and feeds mostly as intended. So if you fancy a budget way of taking out some zombies then look no further! And with it being two toned there is no UKARA required.

This Chiappa Charging Rhino was unfortunately damaged in shipping/storage. The cylinder release lever has snapped, though the cylinder can still be opened by pulling back on what remains of the lever. Otherwise, the pistol is in near new condition, other than two scratches on the left side of the body, beneath where the cylinder release lever would normally sit and some barely visible wear to the cylinder index holes in the cylinder, from testing.  

This Modify XTC G1-MS was returned to us due to various faults. The trigger pin works its way out of the receiver, there are scratches around the mag well, sling plate, controls and handguard. The rifle cycles perfectly but it only feeds the first round. The charging handle spring is either broken or missing, and as such the charging handle needs to be returned manually when actuated. The mock bolt is stuck to the rear and the dust cover needs to be opened by hand. There is also a spot of rust on the upper receiver rail. This rifle needs some TLC, though with the features this thing packs out of the box it would make a good project gun for those who are technically inclined. 

This Phantom M14 EBR was returned to us due to a broken piece above the charging handle. The trigger guard has since been pinched for a customer repair. The AEG still cycles on both modes but cannot feed BBs due to the missing trigger guard/mag release assembly. Externally the AEG is in decent nick, other than the broken piece below the charging handle the only damage present is a scratch on the trigger and some wear to the two tone blue paint. To fix this you will need to find a new trigger guard, or rig up a solution. 

This Umarex MP7 AEG was returned due to issues with its bolt stop/stop firing on empty feature. With the magazine removed, the AEG does not fire without the bolt catch held down, but when the magazine is in it fires like any other AEG, and does not stop firing when the magazine is empty. Externally, the AEG has some wear to its two-tone paint, and the right side selector is scratched as are the raised edges of the iron sights. The magazine looks like it has had a rough life, and is missing its baseplate, meaning the outer shell of the lower section moves freely. Could be a decent project gun, but only for the experts!