CYMA Gen.2 CM.039C AK-47 Tactical AEG

Suggested Accessories

Tracer Units: Acetech Raider Bifrost Tracer | PTS Dead Air Wolverine Tracer | Eshooter Flare Mono Tracer

Red Dot Sights: Guerilla Tactical Holo-551 |  Theta Optics Rugged A1 Mini | WADSN EFLX Micro Red Dot

Scopes: Vector Optics ZOD 1-4x20IR | Vector Optics 2-6x32AOE Compact | Theta Optics Rhino 4x32

Tactical Flashlights: WADSN PEQ-15 Red Laser/White Light Module | WADSN V600 Scout Flashlight

Platform Details

Starting at the tip of the barrel, we can find a classic "slant" muzzle brake, intended in the real AK to counteract the jarring recoil forces of the massive AK bolt carrier by redirecting the muzzle blast. The brake may look like it is not straight, but we assure you this is all part of the utilitarian AK design.

The slant brake mounts to 14mm CCW male threads at the tip of the outer barrel and can be swapped out for a suppressor or tracer unit if you want more of a Special Forces look for your AK. We recommend a PBS-1 Suppressor if you want an authentic Russian-style look!

The front sight of the CM.039C mounts directly to the outer barrel and provides an adjustable front post with protective wings to ensure an accidental bump or scrape doesn't render your sights useless. As part of the classic AK aesthetic, we can find a dummy cleaning rod running parallel to the outer barrel, through the front sight block and gas block. This isn't intended for cleaning an Airsoft barrel and is just for the look.

As we move rearward, we find the CM.039C dummy gas block and gas tube, which are realistically styled after the original AK47 production variant, the Type 3. The gas tube includes mock vents and a steel sling loop mounted to the barrel on the left side, which is designed for "hook" type slings.

To the rear of the gas block, we can find the polymer handguards, which are of a modern tactical style with vent holes and integrated 20mm Picatinny accessory rails. These rails allow any accessory designed for 20mm Picatinny to be attached, from flashlights to lasers, foregrips and even RunCam action cameras.

The top and bottom rails cover the full length of the handguard, and the side rails provide just enough space to mount a tactical flashlight or PEQ laser unit. This rifle comes preinstalled with a folding vertical foregrip, which can be used either deployed or folded and provides much better gripping qualities than the handguard alone.

Following the handguard, we come to the trunnion block, which provides the mounting point for the classic AK tangent rear iron sight. The rear sight provides multiple graduations for adjustment and a fine rear sight notch to align with the front sight post.

The sight itself can be adjusted by pressing the drums on either side of the sight notch and moving the notch back and forth on its base. The lever on the right side is the handguard disassembly lever and is functional, but due to the use of a railed gas tube, the Allen bolts holding the gas tube on will need to be removed before the lever comes into use.

As we reach the receiver, we can find a standard AK-47/74 layout with a centrally positioned ambidextrous magazine release at the front of the trigger guard, a mock bolt carrier on the right side of the receiver and a 3-position fire selector on the right side. Sitting atop the receiver is a long section of 20mm Picatinny rail, allowing you to set this AK up with long-distance scopes rather than relying on the good old spray and pray.

To access the HOP-up unit of the CM.039C, simply hold the charging handle to the rear to reveal the slider-adjustable HOP-up unit. The slider unit is known as one of the best designs out there, and that is the reason this unit has not changed in design since the original Tokyo Marui AK-47 AEG. To increase the HOP-up effect, simply move the slider rearwards.

Returning the slider to the front will reduce the HOP-up to its lowest setting. HOP-up allows you to adjust the amount of backspin applied to your BBs and set this AEG up for different ammo weights, looking for the flattest possible trajectory.

The fire selector provides 3 modes of fire: safe, full auto and semi-auto, in that order. It is an AK after all! This was designed to allow for fast selection of semi-auto with a quick sweep down of the selector, and isn't actually because the AK was designed for full auto, as is the common myth. Each fire selector position also features engraved Cyrillic markings, just like a real AK rifle.

The battery compartment is beneath the top cover, and to access it, you must first pull rearwards on the rail section to release it, then fold it upwards, but ensure your iron sights are lifted so they don't interfere with one another. Then, once the rail section is out of the way, press the button at the rear of the top cover, and it should come straight off, revealing a Deans battery connector. For the CM.039C, we recommend a 7.4V 1300mAh LiPo in AK Stick configuration.

On the bottom of the receiver, we find the polymer pistol grip, which has been textured for an improved feel and a better grip. The trigger guard and magazine release can be found just ahead of the pistol grip, and are constructed from steel to provide solid magazine locking and ample rigidity.

The magazine release is placed in the centre of the receiver and is accessible from either side of the AEG. A "rock and lock" retention system, the AK mag release requires you to first index the front "hook" on the magazine inside the receiver, then rock the magazine to engage the catch.

At the rear of the receiver, we come to the good old M4/AR-15 buffer tube, adding functionality to this AK platform its wood-clad cousins can only dream of. The buffer tube is constructed from alloy and provides 6 positions of adjustment for the pre-installed M4A1 "LE" stock, or any other M4/AR-15 AEG stock you choose to mount. The adjustment lever of the LE stock is on the bottom, with an alloy sling loop just behind, designed for "strap" slings.

Internals

Internally, we are in for a real treat with this Gen.2 variant of the CM.039C. The gearbox has been fully revamped and is now equipped with CYMA's V3 MOSFET, enhancing trigger response and preventing trigger lockups if you shoot semi-auto rapidly.

Inside the reinforced V3 gearbox, we're treated to 18:1 ratio steel gears running on 8mm ball bearing bushings, backed up by a potent high-torque motor with Neodymium magnets. This provides a snappy cyclic rate in both fire modes while reducing wear and tear on the gearbox shell through its low-friction bushings. The piston also has a full rack of steel teeth, ensuring it can go the distance with the rest of the build!

Features

• Full metal construction - Lots of steel for a more realistic weight
• 14mm CCW threaded outer barrel - Ready for any mission-essential muzzle device
• Pre-installed "slant" muzzle brake - Classic AK styling, made from steel
• Adjustable tangent open iron sights - Adjustable via the drums on either side
• Includes folding vertical front grip - Tacticool attachment; remove it if you don't need it
• 20mm Picatinny railed handguards - Attachment space, unheard of on an AK!
• Alloy slider adjustable HOP-up unit - Accessible with the charging handle held back
• Steel receiver top cover - Realistically hefty and solid
• 20mm rail section above top cover - Mount scope setups on an AK!
• 3 Position fire selector - SAFE - AUTO - SEMI, just like the real AKs
• 6 Position M4/AR-15 buffer tube - Adjust the stock to suit your body type, compatible with M4/AR-15 stocks
• M4/AR-15 "LE" Stock - The classic 1990s M4A1 stock, sling loop on the bottom
• Top-wired: Deans connector - Recommended Battery: 7.4V 1300mAh LiPo in AK slim stick config.
• CYMA Gen.2 Version 3 Gearbox:
  • Reinforced alloy shell
  • 18:1 Steel gears
  • 8mm Ball-bearing bushings
  • Polymer piston with steel full-tooth rack
  • Steel ball-bearing quick-change spring guide
  • High-torque Neodymium magnet motor
  • CYMA V3 MOSFET (ZEUS)
• Compatible with AK AEG magazines - Plenty of spare magazine options

Package Includes

• CYMA Gen.2 CM.039C AK-47 Tactical AEG Rifle
  • 500rnd High-capacity magazine x 2