CYMA Gen.2 CM.048M AKM AEG

Suggested Accessories

Cold War Spetsnaz: 5KU PBS-1 Suppressor | Element Rubber Butt Pad

Modern Chechen Spetsnaz: LCT Classic Side Rail Mount | JJ Airsoft 1P87 Red Dot | 5KU Putnik Suppressor

Soviet Infantry: ACM AKM Dummy Training Bayonet | CYMA AK/SVD Sling

Western PMC Global War on Terror: CYMA Railed Gas Tube | Guerilla Tactical Holo-552

Platform Details

Starting at the tip of the barrel, we can find a classic AKM-style "slant" muzzle brake, intended in the real AK to counteract the jarring recoil forces of the massive AK bolt carrier by redirecting the muzzle blast. The brake may look like it is not straight, but we assure you this is all part of the utilitarian AK design.

The slant brake mounts to 14mm CCW male threads at the tip of the 16.3-inch alloy outer barrel and can be swapped out for a suppressor or tracer unit if you are going for more of a Spetsnaz look for your AK. We recommend a PBS-1 Suppressor if you want the authentic Soviet look.

The front sight mounts directly to the outer barrel and provides an adjustable front post with protective wings to ensure an accidental bump or scrape does not render your sights useless. As part of the classic AK aesthetic, we can find a dummy cleaning rod running parallel to the outer barrel. This isn't intended for cleaning an Airsoft barrel, but it is an important part of the iconic AK silhouette.

Moving further down the outer barrel, we come to the dummy gas block. This connects to the gas tube, which meets the real wood upper handguard via a steel handguard cap. The lower handguard surrounds the outer barrel and is retained by its own steel handguard cap, which includes a sling point on the left side, ideally for hook-type slings. The handguards are constructed from real wood, with a deep and varied wood grain and an ultra-realistic feel.

The trunnion block follows just behind, providing the mounting point for the classic AK tangent rear iron sight, which provides multiple graduations for adjustment and a fine rear sight notch to align with the front sight post. The sight can be adjusted by pressing the buttons on either side of the sight notch and moving the notch back and forth on its base. This sight type benefits over aperture sights in its field of view, allowing you to track moving targets more effectively and avoid tunnel vision.

The lever on the right side of the trunnion block is the handguard disassembly lever. This lever allows you to quickly remove the upper handguard and gas tube, just like a real AKM. This is one of the many perks of using the VFC-style external construction over the TM style: you can strip it like a real AK for extra nerd points!

Next up, we find the receiver, which is constructed from authentic stamped steel. The receiver has standard AK-style controls on the right side, with a stamped steel fire selector lever which doubles as a dust cover when in safe mode, and a charging handle attached to an authentic black dummy bolt carrier, also made from hefty, realistic steel.

In typical AK style, the first position on the fire selector is fully automatic, and the lowermost position is semi-automatic. Each fire mode is denoted by a crisply engraved authentic Russian Cyrillic marking, adding extra realism to this already very realistic AK.

On the left side, we can find an AK quick-detach mounting rail, allowing for authentic Russian scopes to be mounted, or 20mm Picatinny rail mounts if you prefer a more modern Western optic. The receiver also provides several authentic rivets, all found in the correct place for a 70s-era AKM. The receiver top cover is also constructed from stamped steel and is the appropriate design for an AKM, with ribs stamped into the upper surface to provide additional strength while keeping the material thin and lightweight.

To access the adjustable HOP-up unit, simply hold the charging handle to the rear to reveal the alloy slider adjustable HOP-up unit. The slider unit is known as one of the best designs out there, and that is the reason this unit has not changed in design since the original Tokyo Marui AK-47 AEG. To increase the HOP-up effect, simply move the slider rearwards. Returning the slider to the front will reduce the HOP-up to its lowest setting.

The pistol grip is a standard AKM-type pistol grip made from high-density polymer, featuring diamond checkering on either side to ensure the rifle stays firmly in your grasp in any weather condition. Just ahead of the pistol grip, we can find the trigger guard and magazine release assembly, constructed from steel to provide solid magazine locking and ample rigidity.

The magazine release is placed in the centre of the receiver and is accessible from either side of the AEG, offering both left and right-handed users an easy reload process. The magazine retention system of the AK platform is a "rock and lock" motion, requiring you to first index the front "hook" on the magazine inside the receiver, then rock the magazine to engage the catch.

The stock is made from real wood and has an authentic colouration for AK furniture, with a varied grain and satin finish. The wood both looks great and perfectly matches the handguard, providing the most realistic feel from front to rear. The bottom of the stock also features a steel sling loop, which pairs well with the front sling point on the lower handguard cap, providing appropriate mounting apparatus for a two-point sling, but ideally suited to an AK-47/74 sling.

The butt plate is made from stamped steel and is appropriately untextured to match the real thing. Those accustomed to textured rubber butt plates will find that there is no room for comfort in this utilitarian design. However, you can add a rubber butt plate extension to experience a touch of Western luxury while keeping the Soviet vibes of the AKM.

The battery compartment is inside the real wood stock, accessible by removing the two screws holding the butt plate in place. With the screws removed, you can lift the butt plate free, revealing a Deans battery connector inside. We recommend a 7.4V 1450mAh LiPo in crane/nunchuck configuration for an easy fit and great performance.

Internals

Internally, we are in for a real treat with this Gen.2 variant of the CM.048. The gearbox has been fully revamped and is now equipped with CYMA's V3 MOSFET, enhancing trigger response and preventing trigger lockups if you shoot semi-auto rapidly.

Inside the reinforced V3 gearbox, we're treated to 18:1 ratio steel gears running on 8mm ball bearing bushings, backed up by a potent high-torque motor with Neodymium magnets. This provides a snappy cyclic rate in both fire modes while reducing wear and tear on the gearbox shell through its low-friction bushings.

Also inside is a CNC aluminium piston head and cylinder head, preventing air leaks and improving reliability in the long term. The piston also has a full rack of steel teeth, ensuring it can go the distance with the rest of the build!

Features

• Full metal build - Hefty and authentic
• Real wood furniture - Flawless looks, ultra-realistic feel
• 6.04mm Tightbore inner barrel - Superb accuracy potential
• 14mm CCW male-threaded outer barrel - Tracer/suppressor ready
• AKM Slant muzzle brake pre-installed - The authentic AKM muzzle device
• Adjustable Tangent iron sights - Elevation adjustable via the buttons on the side of the rear sight
• Russian AK dovetail side mount - Compatible with Russian AK optics or 20mm Picatinny mounts
• Slider adjustable HOP-up unit - Alloy construction for strength, accessible with the charging handle held back
• Ambidextrous magazine release - Easy reloads from the left or right side
• Realistic disassembly - VFC-style build, all pins and rivets, no screws!
• Fixed real wood stock with steel butt plate - Battery compartment inside, steel sling point built-in
• CYMA Gen.2 Version 3 gearbox:
  • Alloy shell
  • 18:1 Steel gears
  • 8mm Ball bearing bushings
  • CNC Aluminium piston head
  • CNC Aluminium cylinder head
  • Stainless steel cylinder
  • Polymer piston with steel tooth rack
  • Quick-change spring guide
  • High-torque Neodymium magnet motor
  • CYMA V3 In-line MOSFET
• Rear-wired: Deans connector - Recommended battery: 7.4V 1450mAh LiPo in Crane/Nunchuck config.
• Compatible with AK-47/74 AEG magazines - Plenty of spare magazine options available

Package Includes

• CYMA Gen.2 CM.048M AKM AEG
  • 2 x 500rnd High-capacity magazines