- Progressive Coiling
- Coloured Rating Tip
- SiCr Zinc Coated Steel
Produced to an incredibly high quality with the best mil-spec steel rated SiCr. Every spring no matter the rating has gone through a full quality control test by ASG for your peace of mind that you are fitting a reliable spring.
- Perfect Spare Set
- All Metal Shims Set
- Set of 0.1 and 0.2 Thin Shims
A pack of shims with two degrees of thickness, useful for ensuring your gearbox turns over as smooth as possible.
- Pack of 5
- Glass Tube Fuses
- Ideal For Spare Parts
A convenient pack of 5 x glass tube fuses of selectable amperage.
- O-ring Fitted
- 21.23mm Long
- Heavy Duty Polymer
A replacement or upgrade air nozzle for AEG M4s that require a nozzle length of 21.2mm.
- For V2 Gearbox
- Perfect Spare Part
- Replace Burnt Contacts
A replacement unit for Version 2 Airsoft AEG Gearboxes. This unit is the perfect replacement for any worn or burnt out trigger mechanisms you have in your current Airsoft AEG.
- Low Travel Trigger
- For ASG Scorpion Evo
- No Modification Needed
A replacement Trigger for the Scorpion Evo, which is designed to be dropped into the gun and decrease the amount of travel time in the trigger, allowing for faster repeat shots.
- Silicon Coated
- 2 Metres Length
- Highly Conductive
Super conductive and easy to route throughout your gearbox and rest of your Airsoft AEG.
- Bearings
- For V2 Gearboxes
- Ultimate Upgrade Part
An upgrade or replacement spring guide for Version 2 gearboxes.
*Please note this item has been updated by ASG and now comes in black rather than silver
- Chrome Finish
- Includes Fitting Screw
- For Version 3 Gearboxes
A vital spare for Version 3 gearboxes.
- Reduces Stresses
- Improves Lifespan
- For V6 / V7 Gearbox
A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position.
- Neodymium Magnets
- Large Carbon Brushes
- Short / Long Shaft Motor
A Spare or Replacement Motor for Airsoft AEG which require a High Quality Motor as part of an Upgrade Build or Repair.
- Tight Adjustment
- Uni-body Design
- Range Increase
This is an official aftermarket Airsoft Hop-up Unit for the ASG Scorpion Evo, made by none other than ASG themselves! This awesome unit is constructed from a single piece of CNC 'Aerospace' Aluminium, and states it will yield a 20% increase in range and accuracy. It is also said to be tailored to Flat Hop and R-Hop setups, if you have already made this modification. If you haven't done this modification, don't worry, it will still give you performance benefits.
- Perfect Upgrade
- Alloy Hop-Up Unit
- No Loose Movement
A replacement Hop-Up Unit for Airsoft AK Rifles, designed and constructed to high standards by Action Sports Games in Denmark as part of their Ultimate Upgrade Parts Range.
- Great Spare Part
- Hop and Nub Set
- Soft Rubber Design
A replacement hop-up rubber and bucking for Airsoft AEG Hop-Up units.
- Great Spare Part
- All Metal Construction
- Set of 0.15 and 0.3 Thick Shims
A set of both thick and thin shims, useful for ensuring your gearbox turns over as smooth as possible.
- 5 Clips Per Pack
- Fits Mix Of Hop Units
- Can Be Shaped With Knife
ASG Ultimate barrel locking clips are sold at 5 per pack. Ideal replacement for any loose or fragile barrel clips.
- Low Travel Trigger
- For ASG Scorpion Evo
- No Modification Needed
A replacement Trigger for the Scorpion Evo, which is designed to be dropped into the gun and decrease the amount of travel time in the trigger, allowing for faster repeat shots.
- O-Ring Fitted
- Perfect Air Seal
- Heavy Duty Polymer
Having troubles with a snapped, chipped, or damaged Air Nozzle on your beloved Airsoft M14? This nozzle is an upgrade or replacement air nozzle for M14 series AEGs.
- Set of 3 x Long
- For V2 Gearbox
- Flat Head Screws
Ideal upgrade or replacement screw set for an Airsoft V2 gearbox. May also be compatible with other gearbox types.
- Upgrade Part
- Quick Install Part
- Replacement Guide
A replacement Quick Change Spring Guide, designed to replace the Stock Spring Guide, should you want to upgrade or replace a damaged unit.
- Gold Plated
- Includes Heat Shrink
- 10 Connectors Per Pack
If you have a damaged wire, snapped motor connector or just want to improve your electric conductivity then this pack is ideal.
- High Quality Finish
- Great For Rebuilding
- Every Spring Needed
Set of several springs for multiple purposes from anti-reversal latch springs, trigger springs, tappet plate springs and more.
- Strong Rigid Plastic
- V2 M16/G3 Gearboxes
- Can Be Shaved & Modified
Ideal upgrade or replacement for worn out and damaged tappet plates.
- O-Ring Fitted
- Heavy Duty Polymer
- Guaranteed FPS increase
An upgrade or replacement air nozzle for AUG series of AEGs that require a nozzle length of 24.79mm.
- Silver Wiring
- Copper Contact Points
- Rigid Bend In Place Wire
A fully pre-wired trigger switch set for Airsoft M4 and other variants that share a Version 2 gearbox.
- Perfect Upgrade
- Alloy Hop-Up Unit
- No Loose Movement
A replacement Hop-Up unit for ASG Brand AUG, and is part of Action Sports Games Ultimate Upgrade Parts range. The Hop-Up unit is an Alloy hop up chamber, designed to be stronger than its polymer counterparts, and features a Polymer Hop-Up adjuster.
Level up your AEG and get CQB ready
Browse our full spectrum of AEG internal parts, including P90 parts that allow you to upgrade your electric SMG, as well as parts suitable for AEP mods and more.
From steel airsoft motors to electric triggers, we only ever stock named brands we’ve tried and tested ourselves. Plus, if you want to make some changes to your airsoft gun, our expert technical team will be happy to support you - simply get in touch with us and let us know what you need.
Our collection of airsoft upgrades is second to none, so why shop anywhere else? Browse online today for next day delivery.