Refine results
Refine by
Viewing 30 of 75.
grid
list
4.99
Was 5.99
Save 1.00
  • Replacement Sling Loop
  • ICS OEM External Part
  • For ICS SMG-5 SD Range

A replacement for lost or damaged ICS CES SMG-5 SD Series sling loops these parts are direct from the manufacturer replacements, which are exactly the same as the ones supplied with the weapon. Can be used to replace lost or damaged sling loops which may have been lost if too much force was applied to the sling.

7.49
Was 7.99
Save 0.50
  • Wide Flat Patch
  • WE, KWJ GBB & VSR
  • Varying Degrees Of Hardness

The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon. 

8.99
RRP 10.49
Save 1.50
  • Laser Cut Webbing
  • MOLLE Compatible
  • Double Zip Closure

A small utility pouch designed to hold tools, equipment and even Pyro on your MOLLE Compatible Rig for easy access when Airsofting. 

8.99
Was 15.49
Save 6.50
  • Dual Bay Charger
  • For RunCam Batteries
  • Capture More Footage

A dual-bay Battery Charger for the RunCam Scope Cam 4K, allowing you to charge up to two Batteries simultaneously. Whilst the RunCam Scope Cam is amazing and compact, it's Battery Life is limited, and so will be the deciding factor in how much footage you can capture throughout a day. Provided you have enough Batteries on standby, you can record for as long as you like, making this an essential purchase for any serious Airsoft content creator.

12.39
Was 15.49
Save 3.10
  • IP65 Waterproof
  • Fits Lots of Calibres
  • Perfect Range Companion

A tough and compact Polypropylene Carry Case for .308 (and a wide range of other) ammunition, with a convenient Folding Grab Handle that makes it super easy to transport and store. If you need better management for your ammo or spent cases, then you're in the right place.

14.99
Was 16.99
Save 2.00
  • Wrist Support
  • Quick Drying
  • Lightweight

Lightweight and made from tough materials, these strong gloves are perfect for use in rough outdoor environments. These gloves are perfect for Airsoft, protecting your hands from rough terrain, both indoors and outdoors, as well as protecting you from incoming BBs to take the edge off the sting of being hit.

Whether you're buying these gloves for general use or for Airsoft, they're tough, rugged and durable, and are the perfect purchase for anyone looking to protect their hands from the rigours of outdoor activities.

15.49
Was 17.99
Save 2.50
  • 30" - 42" Waist
  • Quick Attach / Detach
  • Heavy Duty Belt System

A heavy duty, tough stitching rigger belt for quick attach and removal, which will do you proud through the toughest of environments.

From 15.49
Was 18.99
Save 3.50
  • Air-Tight
  • Lightweight
  • Parts Included

A range of Piston Heads from Modify, which offer either Aluminium or Polycarbonate construction, made to be extremely durable and air-tight.

15.49
Was 17.99
Save 2.50
  • 20mm RIS/RAS
  • For WE Hi-Capas
  • 'Potato Smasher'

This Alloy constructed Muzzle Device is designed for WE branded Hi-Capa Gas Blowback Pistols, and will provide a 20mm Underside Rail as well as the well-known 'potato smasher' front end. This is the perfect accessory for a Hi-Capa that you want to add your own unique touch to, especially if you want to add a Torch or Laser.

18.99
Was 53.49
Save 34.50
  • 7'' in Length
  • For GBB / AEG
  • Fixtures & Fittings Included

A front rail system for your m4 platform to replace any standard hand guard you are currently using. 

21.49
Was 65.49
Save 44.00
  • 9" in Length
  • For GBB / AEG
  • Fixtures & Fittings Included

A quad 20mm RIS railed front hand guard designed to replace the standard handguard on M4 / M16 AEGs and GBBs, allowing the installation of accessories such as grips or lights.

21.49
RRP 23.99
Save 2.50
  • 3rd Generation Mosfets
  • Trigger Protecting MOSFET
  • Multifunctional AEG Controller

Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space possible, and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C.

23.99
Was 29.99
Save 6.00
  • Belt Mounted
  • Smooth Draw
  • Kydex Material

A tough and durable Open Top Holster which is made from Kydex material to a high standard, offering you a stable belt-mounted platform to effortlessly holster and unholster a wide variety of sidearms, from the EU-Series to the CZ Family.

23.99
Was 29.99
Save 6.00
  • Lightweight T-shirt
  • Low-vis Outrider logo
  • Breathable material

A Utility T-shirt designed to be lightweight, quick-drying, and breathable. This is a perfect day to day wear item, as well as a very comfortable undergarment for use with body armour or a rig.

23.99
Was 35.99
Save 12.00
  • Tac-light style switch
  • For PEQ 2.5mm Jack
  • Keymod and M-LOK compatible

We get it, you want to light the enemy up with your PEQ box, but the switch is so far away...enter the Hot Button from WADSN. The button can be mounted directly to M-LOK or Keymod rails, saving messing around with velcroing standard pressure switches, and can place the main control for your PEQ box wherever there is a room!

29.99
RRP 47.49
Save 17.50
  • Quick Release Buckles
  • 360 Degree Rotation
  • For NUPROL Holster





Designed and built to work in conjunction with NUPROL's Perfect Fit Holster Range, allowing the attachment of Holsters to the platform in any configuration. 

33.19
Was 41.49
Save 8.30
  • Waterproof IP67
  • Impact Resistant
  • Pick n' Pluck Foam

The Ironclad is a wide and deep Hard Case made from seriously strong Polypropylene (PP) + Glass Fibre filled with four layers of Pick and Pluck Foam, so that you can customise it to suit your needs perfectly. With a Water and Dustproof seal, IP67 Waterproof Rating, Crush and Impact protection as well as Extreme Temperature performance and a Pressure Equaliser Valve, this is the best way to protect important items during transit and storage.

39.49
Was 43.99
Save 4.50
  • Extending Legs
  • Adjustable Length
  • 20mm RIS Adapter

A robust and adjustable bi-pod designed for use with Airsoft Sniper Rifles, supplied with a 20mm RIS rail adaptor allowing the bi-pod to be used with the widest possible range of sniper rifles.

39.49
Was 46.49
Save 7.00
  • 6026 T9 Aluminium
  • 14mm CCW Thread
  • Larger Through Bore

A 14mm CCW threaded outer barrel for TM MK23 NBB gas pistols which lets you use more common suppressors on your MK23, without the use of a thread adaptor.

41.49
Was 42.99
Save 1.50
  • Rip-Stop Polycotton
  • Removable Elbow Pad
  • Velcro Shoulder Pocket

A lightweight and breathable top, which is Viper Tactical's version of UBACS, known as Under Body Armour Combat Shirt, designed to keep the wearer comfortable and cool. 

49.59
Was 61.99
Save 12.40
  • Easily Stackable
  • Waterproof IP67
  • Pick n' Pluck Foam

The Terrapin Shockproof Instrument Case from PARRA is a seriously well-constructed Hard Case made from Polypropylene (PP) + Glass Fibre material that makes it Impact Resistant, with a Waterproof Seal that protects it from 1m submersion for 30 minutes, as well as Dust, Shock and Pressure. The hinges are supported by Stainless Steel Pins, and the compact design allows them to be easily stacked together, making it the ultimate travel accessory for those who carry sensitive equipment with them.

53.49
Was 67.99
Save 14.50
  • Waterproof IP67
  • Impact Resistant
  • Pick n' Pluck Foam

The Mongoose Hard Case is another virtually indestructible carrying case from PARRA, designed to transport your most precious and valuable equipment and keep it safe with several layers of Pick and Pluck Foam, as well as being certified by third party assurance-company Intertek to be IP67 Waterproof and Dustproof, Crush/Impact protected as well as Extreme Temperature compliant and with a handy Pressure Equaliser Valve.

53.49
Was 65.49
Save 12.00
  • Strobe mode
  •  40/200/500 Lumen Output
  • Ultra low-profile pistol light
  • If you have been looking for a pistol light to aid your efforts in CQB, this is one of the best we have seen! Introducing the Vaide Scrapper, a compact tactical flashlight optimised for use with compact and subcompact pistols, but equally at home on a CQB primary. The light features magnetic charging, several output levels, and a touch-sensitive smart sensor which allows some serious tactical functionality. 

    57.19
    Was 71.49
    Save 14.30
    • Complete switch assembly
    • Includes KRYTAC MOSFET
    • Pre-wired and ready to install

    If you are experiencing issues with semi-automatic as your AEG gets older, the likelihood is your switch assembly/trigger contacts have become corroded and need replacing. Fortunately KRYTAC are here to provide a complete pre-wired switch assembly, complete with their in-line MOSFET which provides protection to the circuitry and prevents the AEG from firing if the battery voltage drops too low. The assembly comprises of the trigger contacts, MOSFET, automotive fuse, male Deans connector, and spade connectors, all wired together and ready to go once installed.

    59.49
    RRP 71.49
    Save 12.00
    • High density polymer construction
    • Low profile adjustment lever
    • Ample internal battery space

    If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

    66.39
    Was 82.99
    Save 16.60
    • Pick & Pluck Foam
    • Third Party Certified
    • IP67 Water Dustproof

    If you need to transport valuable equipment from A to B, and you need to know that the contents are safe from the ingress of Water and Dirt, Extreme Temperatures as well as Pressure changes and rough impacts, then you need this Hard Case in your life. Made from Polypropylene (PP) + Glass Fibre material, with interior Pick and Pluck Foam that can be cut to perfectly match the contents, you can be sure that your valuable equipment is safe.

    71.19
    Was 88.99
    Save 17.80
    • Intertek Certified
    • Pick and Pluck Foam
    • Water / Crush / Dust Proof

    The Harrier Hard Case is another robust  Polypropylene (PP) + Glass Fibre constructed Hard Carry Case from PARRA, and offers unparalleled protection for your most prized possessions. The Case features soft Pick and Pluck Foam which can be cut to fit around your items perfectly, preventing them from moving in transit. The Case also offers a Rubber Seal for IP67 Water/Dustproof performance, as well as Impact/Extreme Temperature resistance. If you're looking for a Hard Case that can do it all, you're in the right place.

    71.49
    Was 77.49
    Save 6.00
    • B&T ROTEX
    • 14mm CCW Thread
    • Quick Detach Interface

    A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

    71.49
    Was 77.49
    Save 6.00
    • B&T ROTEX
    • 14mm CCW Thread
    • Quick Detach Interface

    A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

    78.79
    Was 98.49
    Save 19.70
    • IP67 Waterproof
    • Pressure Equaliser
    • Pick and Pluck Foam

    Certified by third party quality-assurance company, Intertek, the Manatee Hard Case from PARRA is fully certified to protect your valuable equipment from the ingress of Water and Dust, as well as from Impacts, Extreme Temperatures, and also has a Pressure Relief Valve that can be used to balance the Pressure inside the case (particularly useful when travelling to new altitudes).

    Suns out Guns out...

    Kitting yourself out in the latest and greatest Airsoft Kit just got cheaper! Browse our Summer Sale, and discover some truly exclusive discounts, stock reduced to clear and massive discounts that may only hang around for 24hrs! Sale ends soon!

    You can find all of our Airsoft Summer Sale Items here or just keep an eye out for the Summer Sale Icon in the top Left-Hand corner of products when browsing patrolbase.co.uk

    You can expect to see New and Classic AEGs, brand new Gas Pistols as well as all the Attachments & Upgrade Parts you would expect...