CYMA Airsoft

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength.

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines.

If you're looking to give your CM.700/700A/708 sniper rifle a bit more range the CYMA spring upgrade set will be what you're after, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

An Airsoft Electric Pistol which is based on the Hi-Capa platform and offers a MOSFET for a terrifying rate of fire, making it the perfect dependable backup.

If your Tokyo Marui ZET system M4/AR-15 needs some steel to keep it strong, the CYMA CGS Adjustable Trigger Box for TM ZET System M4/AR-15 GBBR belongs on your shopping list! This complete trigger box is ready to drop in and contains full steel trigger components which should last practically forever in normal use. The box is compatible with both CYMA's CGS M4/AR-15 GBBR series and Tokyo Marui ZET system M4/AR-15 GBBRs. 

Along with its steel construction, the extra perk of this box is its ability to adjust the hammer stroke strength, translating into adjustable FPS by varying the force with which the hammer strikes the valve knocker. As always, we recommend internal upgrades only for those who are confident in how to install them, but with this trigger box being pre-built, most of the hard work has been done for you!

A highly convincing full metal 5.45x39mm AK variant electric Airsoft gun which is built to a realistic standard, and combines modern Polymer aesthetic with an old school folding skeleton stock.

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

If you're the techy type looking to get your hands on affordable spares, the CYMA Tappet Plate for V3 Gearbox belongs in your bits box! This original replacement part is constructed from high-density polymer, designed for V3 gearbox-equipped AEG replicas such as the SMG-5K, AUG, AK and AR36. Whether you've got a platform to repair or you want to be ready in case anything fails, the CYMA Tappet Plate for V3 Gearbox is a handy part to have around!

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD.

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov.

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine.

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If your SMG-5 trigger is a bit worn out or you have a flat trigger inside and you want a more classic SMG-5 look, the CYMA Trigger for SMG-5 AEG is what you need. This trigger is only for SMG-5 AEGs which use a version 2 gearbox and will not fit the version 3 gearbox equipped SMG-5K and SMG-5PDW series. The trigger itself is constructed from alloy and has the curve of the original SMG-5 trigger, making for an appropriately realistic look. Included with the trigger is a trigger return spring, so if you have lost this part you're in luck!

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

if you're looking for a replacement Motor Cage for your TM-spec Thomspon AEG, you've just found one! The CYMA Motor Cage for CM.033/051 Thompson AEGs is a replacement original part from the CM.033/051 series and should fit most Thompson and Aliens M41A Pulse Rifle AEGs on the market, assuming they are Tokyo Marui spec internally. The set includes both sides of the motor cage but doesn't include screws so make sure you have these ready for installation. 

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!

A spare magazine for the CM.121 and CM.121s which holds a total of 30rnds, and is a necessity when purchasing one of these replicas as they don't take standard AEP mags. It is loaded with BBs from the top of the magazine using a Speedloader.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you're in search of a cylinder for a version 2 or version 3 gearbox, CYMA has what you need! The Type 2 Ported Cylinder for V2 & V3 Gearbox is CNC machined from steel and boasts a polished inner surface for reduced friction. Being a "Type 2" cylinder, this cylinder includes a port to bleed off excess air, ideally used with inner barrels between 270mm and 430mm in length. Compatibility-wise, this cylinder fits version 2 and version 3 gearboxes and as always, we only recommend internal parts for those who are confident working on AEG internals.

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

Whether you need to tune FPS or seek a more robust, reliable build, the CYMA CGS CNC Aluminium Nozzle Set w/Adjustable Valve for CGS/TM GBBR is a great buy for any TM ZET System M4 or CGS M4 GBBR owner. This nozzle is made from CNC machined 7075 aluminium, making it incredibly strong and well up to a hard life of hard recoil!

The set includes an adjustable NPAS-style valve and a non-adjustable valve, giving you the option to stay versatile with adjustable FPS or stick to a fixed valve for better consistency. Compatibility-wise, this nozzle set is designed for the CYMA CGS M4 GBBR series and is confirmed to fit the Tokyo Marui M4 ZET System GBBR series, and while it should work, we are unable to confirm compatibility with Double Eagle ZET System clones. We can say for certain this won't work in a WE or Golden Eagle GBBR.

If you want to use your GBBR in CQB one day and as a DMR the next, the CYMA CGS CNC Aluminium Nozzle Set w/Adjustable Valve for CGS/TM GBBR is the part you need to make that happen. Far stronger than polymer nozzles and precisely made with CNC machining, if you want to keep your GBBR recoiling hard in the long run, this part is ideal!

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.