Airsoft Hop Up Units & Buckings

A soft Hop Rubber for Marui compatible AEGs offering an air-tight design, which comes supplied with a nub and is a purple colour.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

Whether you're building a DMR or simply want more range from your standard AEG, an R-HOP kit can make all the difference. Unlike other R-HOP kits on the market, the Trusight Tru-Hop Gen.3 is designed to be effectively a drop-in installation, with no need for adding patches of various sizes and includes both the HOP-up bucking and a concave HOP-up nub.

The set is designed to be widely compatible and should fit most Airsoft AEG spec inner barrels, though due to its enlarged contact patch, it will only work with inner barrels with a window measuring approximately 5mm in length x 1.7mm in depth. If you are happy to get stuck in with your AEG internals and you're looking for range and accuracy improvements, the Trusight Tru-Hop Gen.3 Hop-Up Rubber is what you need!

An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

A set of pre-made R-HOP patches designed to take the stress out of r-hopping your hop-up unit. These patches are replacements for existing hop-up rubber, and are designed to be glued into the window on the barrel rather than sliding over it. This modification is for advanced Airsoft tech, and requires existing r-hop knowledge or experience.

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.

If you have HOP-up woes with your SMG-5 this could be what you need to fix it up! The CYMA HOP-Up Chamber with Rubber and Nub for SMG-5 AEG is a replacement original part for the CM.027 SMG-5 series but should also work in any TM based SMG-5 AEG (not NGRS variants). The set includes a complete HOP-up unit with the HOP-up arm and also includes a basic HOP-up rubber and nub, giving you everything you need to replace the entire unit in a single package. 

This set is designed for the CM.027 which is a copy of the Tokyo Marui SMG-5 AEG and should also work with similar designs but is not compatible with the Classic Army SMG-5 or the later CYMA CM.041 series SMG-5 AEGs. 

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

If you are looking for better accuracy and range, a flat HOP-up nub should do it! The Hades Airsoft Flat HOP-up nub is designed to apply a stronger HOP-up effect than standard cylindrical nubs and is available in 4mm or 5mm lengths.

The nub is constructed from 3D-printed synthetic rubber and maintains its shape regardless of any pressure applied, guaranteeing even pressure is applied across the nub and transferred to your BB without distortion. An additional advantage of using a harder synthetic rubber than the average is that performance will remain constant, even in lower temperatures.

As with other flat HOP-up modifications, this part is only recommended for those who are experienced working on HOP-ups and we suggest that you measure the window size of your inner barrel to ensure you get the correct size for your build.

A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.

If you want your sidearm to be capable of really reaching out, a HOP-up upgrade should be top of your list! The Maple Leaf HOP-up Chamber for VFC/WE/TM EU-Series GBB is constructed from alloy and supplied with a steel HOP-up arm and aluminium "I-key" style tensioner, promising tighter tolerances than the stock HOP-up unit which should translate to better air seal qualities, consistency and thus better accuracy downrange.

This set is compatible with VFC, WE and Tokyo Marui EU-series GBB pistols but should also fit most Tokyo Marui clone EU-series pistols, though as always, we recommend upgrade parts only for the knowledgeable and confident!

The Maple Leaf Autobot HOP-up rubber has gained a reputation as one of the best upgrade components if you want to extend the range and improve the accuracy of a TM based GBB pistol, VSR/bar-10 sniper rifle, or GBBR with TM GBB HOP-up bucking compatibility. The Autobot has a wide and flat contact patch to help stabilise your BB in flight and extend your range. This bucking is also designed to ensure your BB is chambered consistently with every shot, guaranteeing impressive accuracy when compared to standard HOP-up buckings. This is the latest variant of the Autobot and is constructed from silicone instead of standard rubber, offering greater resistance to temperature changes.

If you're looking for accuracy improvements for your M4/AR-15 AEG, the Delta Armory TRINITY R-Hop Bucking Bundle for AEG is what you need to tighten your groupings. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the TRINITY bucking is diamond-shaped, similar to the Maple Leaf Super bucking, intended to improve accuracy by applying backspin more consistently. The advantage of using a TRINITY set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you're looking for tighter groupings from your Airsoft AEG, the TRINITY R-HOP Bucking Bundle is the one to go for!

If you have damaged your HOP-up unit and are looking for a replacement, CYMA are now offering their original HOP-up units as an aftermarket part. This unit is for the CM.041K and CM.041PDW AEGs, but will not fit the full sized CM.041 AEGs. The unit is constructed from polymer and comes complete other than the HOP-up rubber. The HOP unit, slider, c-clip and HOP nub are all included, so if you have lost or damaged one of these bits you are in luck!

If you want to push your VSR-10-based sniper rifle to the absolute pinnacle of accuracy, a TDC mod should do the trick! The Hades Airsoft TDC HOP-up Unit Set for VSR-10 Sniper Rifle is designed to replace the original HOP-up arm and adjuster, providing direct pressure to the top of the HOP-up nub and bucking to eliminate side-to-side shot deviation.

Installing this TDC unit will require some extensive, irreversible modifications to your base sniper rifle, so we only recommend this set for those who are confident with power tools and have a decent level of Airsoft technical knowledge.

The unit requires you to drill a hole through the top of your outer barrel using either a 5mm or 5.5mm drill bit and the included drill guide, inserting the guide into the stripped outer barrel to ensure the hole is drilled in the right place. Hades also recommends that when the modification is complete, that you glue the TDC unit to your outer barrel using super glue or another strong adhesive.

If you are the type of sniper that likes to get their hands dirty with modifications and you want your VSR to outrange and outshoot the rest, this kit will do it!

If you want to upgrade your Umarex Glock and build a sleeper of a long ranged pistol setup, this is the HOP-up unit you need! The Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is compatible with the Umarex/VFC Glock 17, Glock 19, Glock 19X and Glock 45 GBB pistols and is constructed from alloy for improved strength. The unit is supplied with two HOP-up arms with one pre-installed, giving you a spare to keep handy or modify for some experimental HOP-up setups. 

The tolerances of this unit are far more precise than the original, offering better air seal and gas efficiency, translating into better effect on target and better consistency. If you want to shock the enemy by landing a hit with your pistol at long range, the Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is the key!

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

Will fit almost all Airsoft AEG on the market. The rubber is made from Silicon and features a 50 Degree Nub, applying a moderate amount of hop to BBs. 

Master Mods are a new Internal Parts manufacturer bringing a whole new meaning to the term reliable. The Master Mods R-Hop Contact rubber is a hardened contact for use with heavier weight BB's, increasing accuracy & performance.

Next level of Airsoft sniper rifle hop-up rubber produced with similar materials and processes to Madbull's current line up of AEG hop-up components. 

If you're building a DMR or accurised AEG, the Delta Armory BERSERKER R-Hop Bucking Bundle for AEG is what you need to achieve maximum range. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the BERSERKER bucking is shaped to fill the HOP-up window on your barrel, just like home-brewed R-HOP setups of old. The advantage of using a BERSERKER set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you use heavy BBs and need a range increase, this set will do exactly that!

This TDC hop up chamber from TTI is made from CNC aluminium, it is made for Hi-Capa GBB handgun replicas from Tokyo Marui / WE. This hop-up chamber has a TDC adjustment system operated via a notched wheel at the bottom of the chamber.

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

Delivers more range and improved accuracy from your Arisoft AEG. Designed for primerally M4 AEGs but may be compatible with other AEGs that use an M4 style hop unit. 

The Maple Leaf Delayer OMEGA Nub is a HOP UP Rubber Nub For Airsoft Hop Up Units, it matches the shape of the BB to increase accuracy and overall performance of your airsoft gun. The nub gives more contact area to the BB and provides a precise amount of pressure around the BB instead of just on the top.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.