Vector Optics

A cost effective MRDS option from Vector, the Victoptics FRE 1x18 sight features adjustable brightness, an integrated Picatinny rail mount and polymer cover to keep your sight safe whilst you're not lining it up with some unfortunate soul...

A tough Alloy constructed Red Dot Sight which is reminiscent of the T1 style design, and comes included with both a high and low profile 20mm mount to use it raised or snugly seated on your rail. It accepts a CR2032 battery and has 11 brightness levels, as well as tool-less Windage & Elevation adjustment.

If you have a nice optic you want to keep safe but you also want to use it to great effect in skirmishes you can do so with confidence with this Vector Optics lens protector installed! The Lens Protector Cap For Red Dot Sight is designed to fit red dot sights or scopes with an objective lens diameter of between 29 and 29.3mm and is comprised of 3 parts; the aluminium housing, the polycarbonate protective lens and rubber O-rings to ensure a tight fit.

Avoid that heart-stopping moment you hear glass smashing mid-game for a far smaller financial sacrifice than buying a whole new optic!

The Victoptics 1x35 RD Scope is a Red Dot Sight for Airsoft Guns, attached via the integrated 20mm RIS/RAS Mount. The Sight features a 5MOA Target Dot, meaning it will cover 5" of space at 100 yards. The Aim Point can be adjusted for Windage and Elevation, using a Flat Head Screwdriver, ensuring you can align your BBs with the Target Dot.

A series of Flip-To-Side Magnifiers for 20mm rails which are available in either a 3x or 5x magnification to align with a Red Dot Sight to help you reach out and touch targets further away than your naked eye would allow.

Please note:  The mount may differ from image due to new model release

A T-1 style optic which is protected by tough Rubber Armour, has eleven levels of brightness on its' 3 MOA Target Dot and comes included with both a high and low profile 20mm mount. Enjoy real-steel quality at Airsoft prices.

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

An LPVO/Short dot style optic with a fine crosshair, which can be illuminated in red for extra visibility. The Vector Optics Forester series of riflescopes are well known for their high-quality construction and impressive functionality. The 1-5x24 Forester scope is the perfect scope for medium to long-range engagements and would look right at home on a DMR, Sniper rifle or DMR styled AEG rifle.

If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

This Compact Red Dot Sight from Vector Optics is an insanely cost effective, yet still high quality sight for Airsoft Guns with a 20mm RIS/RAS Rail. It features variable brightness, with a Red or Green aim point, and a choice of four reticules from a 'Plus' style to the traditional Target Dot.

A 1x30 red dot sight that comes included with its' own pre-installed 20mm RIS mount, has 11 levels of brightness and is fully adjustable for windage and elevation.

If you remember the old M910 series of flashlight/vertical grip combos you will remember how big and heavy they were. The Cyclops Tactical LED Flashlight/Grip Combo by Vector Optics is a radical rethink of this concept, resulting in a lightweight and compact combination which is perfect for weapons with a short front end and limited rail space. If you are running a compact setup and you are struggling to fit all the mission essentials on board you can save space with this nifty device!

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

A mounting plate designed to fit to allow the attachment of backup and red dot sights to TM based Hi-Capa 5.1 pistols. The plate attaches to the pistol by replacing the rear sight, and using the existing screws secures into place. The backup sight plate is constructed from lightweight yet durable 6061-T6 Aluminium Alloy and secures your sight securely to your pistol.

This mount is perfect for those Airsoft skirmishers who are looking to attach a red dot or backup sight to their pistol in order to make more accurate and quicker snap shots to get an advantage whilst playing.

A series of Flip-To-Side Magnifiers for 20mm rails which are available in either a 3x or 5x magnification to align with a Red Dot Sight to help you reach out and touch targets further away than your naked eye would allow.

Please note:  The mount may differ from image due to new model release

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

Introducing the Vector Optics Victoptics CRL 1x22, an ultra-compact, lightweight Red dot sight with an included riser mount. This RDS is styled after the Aimpoint Micro series of red dot sights, and combines a super-tough design with a wide range of brightness adjustment, perfect for both bright outdoor conditions and clearing dark rooms the CQB site.

A High Quality Hunting Scope by Vector Optics, featuring adjustable magnification from 2-7x and a 4" eye relief, this optic provides clarity for all combat scenarios! 

An Alloy constructed sling mount for KeyMod rail systems, which comes included with a QD sling loop ready for any basic-clasp sling.

An Airsoft modular rail panel designed to fit onto KeyMod hand guards, providing a 2'' 20mm RIS / RAS rail. The product comes as a kit and is easily built and can quickly be installed to KeyMod hand guards to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is a perfect purchase for any Airsoft player who has got their hands on a new rifle and is looking to take their gun to the next level by attaching parts and accessories.

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 2'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 4'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

This unique Rail Adapter is designed for 20mm RIS/RAS, and will slide onto your Rail to provide two offset 20mm Rails on either side, allowing you to mount a Torch or Optic at 45 degrees to your Main Rail. This is perfect for mounting a Red Dot Sight as a backup to a Magnified Sight, or for mounting a Torch/Laser nice and close to your Receiver.

A Low Profile Receiver Mount for SMG-5 and G3 Platform Airsoft Replicas, providing you with a medium length of 20mm RIS/RAS Rail on top of your Rifle, ideal for installing a Red Dot or Telescopic Sight. If you own one of these Airsoft Guns then a Receiver Mount is the only viable way to mount a Sight onto your replica. It is easy to install, needing only a couple of screws to be tightened up to hold it in place.

An Aluminium Alloy constructed Cantilever mount for 30mm Scopes, which easily mounts onto 20mm RIS/RAS Rail Systems. It offers two connection points with four securing screws in each mount. The base of the mount attaches to 20mm rails by unscrewing the securing nuts, placing onto the rail and re-tightening.

A large-sized Alloy constructed Red Dot Sight which comes with an integrated High Profile Mount for 20mm rails with a Quick Release Lever. It features adjustable Dot Brightness as well as tool-less adjustments and Flip-Up Lens Covers.