Refine results
Refine by
Viewing 30 of 61.
grid
list
£2.99
  • Not For Climbing
  • Spring Loaded Clasp
  • Lightweight Polymer

A single Carabiner designed to allow you to connect and detach objects, such as through loops on tents, bags and other gear. 

£3.99
  • For VX Series
  • Replacements
  • Ideal Spare Parts

A set of tough Polymer buckles, designed as replacements for the Viper Tactical VX Series. The Buckles are an important part of the VX System, so these are ideal spares to have whether you need them yet or not. They feature Quick Release Polymer Buckles, a metal loop and Velcro straps to secure them to your kit. They could also be put to some other clever uses with a bit of creative thinking.

£5.95
  • MOLLE Fitting
  • High Magazine Coverage
  • Adjustable Elastic Retention

An incredible design that truly protects your pistol magazines be it single or double stack from 1911 to G-series and more.

£5.99
  • Bendable Peak
  • Elasticated Fitting
  • Velcro Top & Front

A very comfortable, one size fits all elasticated baseball cap. Available in a range of colours for all environments, keep your head cool whilst keeping the sun out of your eyes.

£6.99
  • Velcro Panels
  • Rip-Stop Fabric
  • Nylon / Cotton Mix

A baseball cap designed for use in the outdoors during extreme sports and similar hobbies, making it ideally suited for use in Airsoft. 

£7.99
  • Secures Mags
  • Half Flap Cover
  • For VX Utility Rig

The Viper Tactical VP VX Utility Rig Half Flap is constructed from 700D Polytech material and is designed for the Viper VX Utility Rig. It's purpose is to attach to the Rig and secure over the top of one half of the Rig. This helps keep tension on the Rig and secures the magazines in place where it is installed. It even has a hook and loop front panel so that you can still cover your Rig with name, rank or morale patches.

£8.99
  • Velcro Sticky Back
  • Mix & Match Comfort
  • Square & Rectangular Pads

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

£9.99
  • Velcro Sticky Back
  • Mix & Match Comfort
  • Square & Rectangular Pads

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

£9.99
  • Belt Mounted
  • 3 x Elasticated Loops
  • Large Velcro ID Panel

A belt mounted pouch for securing important items like Allen keys and other tools, and has interior elastic retention loops that make this pouch perfect for holding smoke grenades and large pyro.

From £9.99
  • UV400 Protection
  • CE EN166 Ballistic Rated
  • Anti-Scratch & Anti-Fog Coated

A set of high quality stylish low profile, Airsoft safe shooting glasses, allowing Airsofters to protect their eyes and have completely clear and obscured vision. They're suitable for a wide range of uses, from Airsoft and other sports to driving.

From £9.99
  • UV400 Protection
  • CE EN166 Ballistic Rated
  • Anti-Scratch & Anti-Fog Coated

A set of high quality stylish low profile, Airsoft safe shooting glasses, allowing Airsofters to protect their eyes and have completely clear and obscured vision. They're suitable for a wide range of uses, from Airsoft and other sports to driving.

£9.99
  • Adjustable Size
  • Tough Retention
  • For Pistol/SMG Mags

A new style of MOLLE mounted retention-style magazine pouch design, which can expand to fit almost any pistol/SMG magazine (within reason), and locks them in place via friction.

£9.99
  • Lazer MOLLE
  • For VX/Buckle Up
  • Front Facing Velcro

A Lazer MOLLE Panel for VX/Buckle Up compatible Chest Rigs, which offers a large 24x15cm Velcro/MOLLE combo panel for installing Pouches, Patches and more. The Panel easily connects to Buckle Up Systems via the dual Polymer Clasps at the top. If you run multiple loadouts which all require their own Chest Rig Setup, then a VX/Buckle Up System is the easiest way to quickly swap the main pouch section of your Chest Rig out.

£10.99
  • Water Resistant
  • Quick Drying Design
  • Hook & Loop Panels

This is a Baseball Cap/Hat for Airsoft or everyday general use, that is constructed from 100% Polyester, making it resistant to light showers and protecting your eyes from strong sunlight. The hat is secured by an elasticated band, ensuring that it can fit a wide range of heads. The strong, curved Peak retains it shape, whilst the hook and loop panels allow you to customise the Hat with morale patches.

£11.99
  • Adjustable Size
  • Can Be Stacked
  • Tough Retention

A new and stunning MOLLE mounted retention-style magazine pouch design which can expand to fit almost any rifle magazine (within reason), and locks them in place via friction.

£11.99
  • Padded Hands
  • Rugged Leather Design 
  • Velcro Tightening Strap

A set of tactical gloves from Highlander, Available in a Fingerless form, designed to keep your knuckles and hands covered while allowing you to have full handling over your fire controls at all times! Plus no more taking your gloves off every time you get a text! Also Available in full finger coverage for those colder days.

£12.99
  • Mesh Lenses
  • No Fogging Up
  • Adjustable Strap

High quality mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles. 

£12.99
  • Extend Chest Rig
  • Lazer Cut MOLLE
  • Hook & Loop Panels

The Viper Tactical VP VX Lazer Wing Panel Set is designed as a set of extensions for Chest Rigs, attached anywhere you want on your Tactical Vest by using the large Hook & Loop panels. The set comes included with two separate wings that both have two rows of Lazer Cut MOLLE Loops to extend the capacity of your Chest Rig, and help squeeze that extra pouch or two onto your setup.

£12.99
  • Padded Hands
  • Rugged Leather Design 
  • Velcro Tightening Strap

A set of tactical gloves from Highlander, Available in a Fingerless form, designed to keep your knuckles and hands covered while allowing you to have full handling over your fire controls at all times! Plus no more taking your gloves off every time you get a text! Also Available in full finger coverage for those colder days.

£13.95
  • Very Lightweight
  • Perfect For Airsoft
  • High Wicking Material

A lightweight top designed to be as breathable as possible whilst retaining comfort and fit for the user.

From £9.99
  • UV400 Protection
  • CE EN166 Ballistic Rated
  • Anti-Scratch & Anti-Fog Coated

A set of high quality stylish low profile, Airsoft safe shooting glasses, allowing Airsofters to protect their eyes and have completely clear and obscured vision. They're suitable for a wide range of uses, from Airsoft and other sports to driving.

£17.99
  • Apply Patches
  • Velcro Pockets
  • Comfortable Design

A heavyweight T-Shirt designed to be as practical as it is comfortable. The shirt comes with two Velcro secured arm pockets, allowing you to keep small objects at arms reach. 

£17.99
  • Fits Most Pistols
  • Level 2 Retention
  • Adjustable Holster

A universal Level 2 Retention Holster for a wide variety of Pistols, which offers a Trigger Guard Lock as well as Friction Retention to keep your pride and joy safely seated where it should.

£19.95
  • Very Flexible
  • Highly Comfortable
  • Added Rubber Protection

A pair of gloves available in a range of sizes and colours, designed to be protective, flexible and comfortable, making them perfect for Airsoft skirmishers who want gloves which are both tactical and comfy to wear.

£19.99
  • Drawstring Hood
  • Front Pouch Pocket
  • Sleeve Thumb Holes


    Perfect for keeping warm and comfortable, this hoodie is constructed from durable Polyester fabric and features a variety of practical features. 

    £24.99
    • Internal Divider
    • Internal Map Pouch
    • Velcro Lazer MOLLE

    A Large Utility Pouch for MOLLE compatible systems, which will easily mount onto any MOLLE loops to provide a large pouch which is ideal for Tools, Grenades, Mags, Maps or any other important piece of kit that you need to keep secure in a dual-zip pouch.

    £24.99
    • Grid Fleece
    • Mid-Layer Jacket
    • Lightweight & Comfy

    A lightweight, warm and comfortable Mid-Layer Jacket/Fleece for Airsoft and other Hiking/Outdoor uses. It is constructed from 100% Polyester / Grid Fleece material that is breathable and fast wicking to absorb sweat and other moisture.

    £24.99
    • Universal Holster
    • Fits Variety Of Pistols
    • Super Strong Construction

    A universal Level 3 Retention Holster for a wide variety of Pistols, which offers a Trigger Guard Lock as well as Friction Retention to keep your pride and joy safely seated where it should.

    £25.99
    • Kangaroo Pouch
    • 300gsm Polyester
    • Velcro Arm Panels

    A lightweight, warm and comfortable Hoodie from Viper Tactical, which is made from a 300gsm Polyester Bonded Fibtech Fleece material, and provides a large Kangaroo Pouch as well as Velcro Arm Panels, Thumb Loops and a Drawstring Hood.

    £26.99
    • Padding Pouches
    • Tough & Breathable
    • Pen/Cyalume Pouches

    The Invader Gear Combat Shirt is the ultimate Operator's underlayer or primary Combat Shirt for Airsoft skirmishing at other outdoor activities. If you need a tough yet breathable Combat Shirt that is up to the task of extreme use, and comes supplied with pouches for armour/padding as well as Velcro ID Arm Pockets, Cuff Tensioners and Pen/Cyalume Pouches, then you just found it.