Refine results
Refine by
Viewing 23 of 23.
grid
list
£0.99
  • Silver Coated Pins
  • Fits To Power Source
  • Solid White Construction

An upgrade over most Tamiya connectors thanks to the thicker polymer and sprung loaded sides.

£2.99
  • 20.75mm Long
  • Groove For O-Ring
  • For M16A1/XM177E

A replacement or upgrade air nozzle for M16A1/XM177E replica AEG weapons, or any Airsoft gun that needs a 20.75mm length nozzle.

£3.99
  • 9 Screws
  • 9 Sprun Washers
  • Phillips Screw Heads

A complete 18pc set including 9 x Philips type screws and sprung washers.

£4.99
  • Very Reliable
  • Strong Spring
  • Clean Cut Latch

Suitable for Version 6 Airsoft electric gun gearboxes, this is a high quality anti-reversal latch, supplied complete with the anti-reversal latch spring.  Perfect for spares, repairs, new-builds or upgrades. 

£4.99
  • Very Reliable
  • Strong Spring
  • Clean Cut Latch

A complete anti reversal latch and spring set, designed for use with Version 7 Airsoft electric gun gearboxes. A well made piece that's suitable for new-builds, upgrades or repairs and replacements.

£6.99
  • For MP5 Only
  • Prolong Selector Life
  • Hard Polymer Construction

A high quality Keen Sharp replacement Selector Plate with Copper contacts for a Version 2 gearbox MP5.

£7.99
  • Very Durable
  • Limited Flexibility
  • Polymer Construction

A high quality Keen Sharp replacement/upgrade Tappet Plate for Version 3 Airsoft gearboxes. Keen Sharp parts are the staple of all our Workshop work as we have a lot of faith in the quality vs. cost they provide.

£8.99
  • No Wiring Included
  • No Screws Included
  • High Temperature Unit

If your old Airsoft AEG contacts are worn out inside your Version 3 gearbox then this trigger switch unit is an ideal replacement. We have been using these for months now inside repaired Airsoft guns built in our workshop with no complaints to date.

£9.99
  • CNC Machined
  • Bearing Braced
  • Prolong Spring Life

A must have upgrade to improve the reliability of your Airsoft AEG. A spring guide with a bearing will relieve tension on the spring and prevent twisting.

£9.99
  • Polished Smooth
  • Tapered Inside Face
  • Double O-ring Air Seal

An uprated Cylinder Head for Version 7 Airsoft gearboxes, produced from CNC Alloy by Keen Sharp. Keen Sharp parts are the staple of all our Workshop work as we have a lot of faith in the quality vs. cost they provide.

£9.99
  • Polished Smooth
  • Tapered Inside Face
  • Double O-ring Air Seal

An uprated Cylinder Head for Version 7 Airsoft gearboxes, produced from CNC Alloy by Keen Sharp. Keen Sharp parts are the staple of all our Workshop work as we have a lot of faith in the quality vs. cost they provide.

£9.99
  • Polished Smooth
  • Tapered Inside Face
  • Double O-Ring Air Seal

An up-rated cylinder head for g36 variant AEG Airsoft gearboxes, produced from CNC Alloy by Keen Sharp. Keen Sharp parts are the staple of all our Workshop work as we have a lot of faith in the quality vs. cost they provide.

£14.99
  • Wiring Included
  • No Screws Included
  • High Temperature Unit

If your old Airsoft AEG contacts are worn out inside your Version 3 gearbox then this trigger switch unit is an ideal replacement. We have been using these for months now inside repaired Airsoft guns built in our workshop with no complaints to date.

£14.99
  • Wiring Included
  • No Screws Included
  • High Temperature Unit

If your old Airsoft AEG contacts are worn out inside your Version 3 gearbox then this trigger switch unit is an ideal replacement. We have been using these for months now inside repaired Airsoft guns built in our workshop with no complaints to date.

£19.99
  • Quiet Cycle
  • Upgrade Gears
  • Reliable Construction

A helical gear set constructed from Alloy with a ratio of 100:200 that is compatible with most Version 2 & 3 gearboxes. This set includes the Bevel, Spur & Sector Gear.

£39.99
  • High Speed Motor
  • D-Type Pinion Gear
  • Direct From Manufacturer

A high power, high speed motor with D-type pinion gear, designed for use with short-shaft compatible Airsoft electric guns. Perfect for replacing old and worn out motors, but also an excellent base point for building a new project gun. 

£0.99
  • Silver Coated Pins
  • Rigid Construction
  • Don't Use On Power Source

A replacement Tamiya connector that will provide a more efficient connection between your weapon and battery, increasing performance and lifespan.

£3.99
  • Polished Flat Finish
  • 20pcs Total
  • Super Thin

Suitable for any electric Airsoft gun, from basic CYMA to high level Tokyo Marui SOPMOD and Systema builds. Shim your gears to perfection with these super thin shims to achieve a smooth cycle.

£4.99
  • 2 Metre Length
  • Rigid Insulation
  • Easy Installation

Highly rated by Airsoft gun techs due to it's ease of use. You can bend this wiring to the shape of your gearbox preventing if from popping out during assembly. 

£4.99
  • Very Reliable
  • Strong Spring
  • Clean Cut Latch

Designed for use with Version 2 and 3 Airsoft electric gun gearboxes, this is a high quality replacement anti-reversal latch, complete with spring. 

£4.99
  • Hard Silicone
  • U Shape Hop Patch
  • For 0.40g BBs & Higher

To be used with heavy weight BBs to increase your Airsoft sniper rifles range and accuracy, this bucking has been designed specifically for the VSR / BAR-10 Airsoft sniper rifle series.

£14.99
  • Wiring Included
  • No Screws Included
  • High Temperature Unit

If your old Airsoft AEG contacts are worn out inside your Version 2 gearbox then this trigger switch unit is an ideal replacement. 

£19.99
  • Quiet Cycle
  • Upgrade Gears
  • Reliable Construction

A high quality Helical gear set of a 100:300 ratio, and designed to be accepted by most Version 2 & 3 gearboxes. Keen Sharp parts are the staple of all our Workshop work as we have a lot of faith in the quality vs. cost they provide.

Looking to freshen up your weapon, grab yourself some Upgrade or Replacement Weapon Parts

Keen Sharp have long since been a staple of our Workshop Operations since we opened our doors in 2009. They have a massive range of upgrade or replacement parts for every Airsoft Replica and Gearbox Version you can think of, and we depend on their parts thanks to the high quality standard you get for the price. 

Keen Sharp have absolutely everything from basic replacements parts to up-rated components which will see massive improvements in performance. They make everything from Piston Heads, to Battery Connectors, Air Nozzles, Gear Sets, Anti Reversal Latches, Bearings, Pistons and many, many more. If you need to buy a part for replacing or upgrading old or worn out components, your journey should always start at Keen Sharp.