Silverback Airsoft TAC-41P Spring Action Airsoft Snipers Rifle

A perfect ready-to-go Snipers rifle set up, the TAC-41P is raising the already lofty standards for Airsoft sniper rifles in the modern era. Complete with features that you would have to either add yourself using aftermarket parts or bodge onto your VSR-10, the TAC-41P leaves the old-world sniper rifles in the dust. 

The tip of the barrel features a knurled thread protector, concealing the female 22mm CCW threads on the inside of the barrel whilst also functioning as a barrel stabilizing spacer, ensuring accuracy. The barrel can be removed and swapped with a mere 3 screws, and by doing so you are under no risk of damaging receiver threads or other parts which is a possibility with more affordable bolt action rifles. On the top of the barrel, you will find the adjuster for the Top dead center hop unit, a rare feature out of the box which would usually require extensive custom work to install. The TDC hop solves the issue present in some Airsoft sniper rifles wherein when the hop is set to maximum the side adjuster can cause uneven pressure on the BB, affecting its trajectory at range. The trigger can be adjusted from being so light that a sneeze in its direction with fire the gun to a much safer and more positive pull for those who want to know exactly when their trigger will fire the rifle. 

The adjustable stock comes complete with 3 stock spacers, meaning you can adjust this rifle to the optimum length for your arms to work the bolt quickly. It also features an adjustable cheekpiece that allows for low, medium, or high scope rings or even the use of a full face mask. Beneath the adjustable cheek rest, you will find a waterproof rubber seal, under which the tools for setting the bolt position, disassembling the rifle, and removing the barrel are stored. The ergonomically designed semi-pistol grip has been textured in a comfortable but grippy fashion, ensuring you have a positive grip on the rifle and a consistent holding position without ripping your fingers to shreds. The foregrip of the high-density polymer stock features M-LOK slots at the 3, 6, and 9 o'clock positions, meaning you can add a bipod, scope camera, laser, cup holder, or anything else you may need to complete your mission. 

Towards the rear, you will find the monstrously large bolt handle which is easily grabbed when working the bolt in a hurry. Its grooved surfaces provide a positive grip ensuring the bolt handle will never slip out of your hand. The angle the bolt is worked at gives consideration to scope mounting, guaranteeing its travel will not be obstructed when an optic is fitted. The crowning glory of this rifle is its ability to swap the bolt handle from the right side to the left, meaning it can be operated by either right-handed or wrong-handed people! Having a southpaw sniper rifle used to be only for those willing to cut their receiver to pieces and do some serious custom work, no longer! The Silverback TAC-41P has taken everything into consideration!

Behind the bolt is the manual safety which features a highly visible red dot to indicate the condition of the rifle. The safety is very ergonomically designed, allowing you to select the fire position without removing your hand from a firing grip or using your support hand. The safety can only be activated when the rifle is cocked. Forward of the trigger is an extended magazine catch, meaning reloads are no longer a fumbly "threading a needle" type situation for the Airsoft sniper. The extended magazine catch, coupled with 48 round magazines in a form barely larger than rival sniper rifle magazines means the TAC-41P has the perfect combo of fast reloads with magazine capacity approaching double that of its competitors. 

Internally the TAC-41P features an adjustable trigger, TDC hop unit, and is compatible with AEG springs, meaning upgrading your spring is more affordable and accessible than ever before. The hop unit also boasts compatibility with AEG hop rubbers and inner barrels, with the option to convert it to take GBB hop rubbers. 

Out of the box, the rifles bolt is not installed, however, you will find detailed instructions in both the extensive user manual or on Silverback's youtube channel, which also features videos on disassembly, upgrades, and other advanced features of the TAC-41P. 

If you are looking for one of the most customizable and advanced Airsoft sniper rifles available in the world today, this has to be up there. Loaded with features most Airsofters could only dream about until recently and all the options to upgrade or add to the already impressive feature-set the rifle possesses, the Silverback TAC-41P fits the snipers role better than the rest!

Features

• TDC Hop Unit
• Long receiver rail 
• Ergonomic controls
• M-LOK compatible
• Adjustable Trigger
• Quick swap Barrel
• Adjustable cheek riser
• Ambidextrous capable 
• Stock Adjustable for Length of pull
• AEG Spring and Hop compatible 

Package Includes

• TAC41P
• Bolt and handle
• 3x Stock spacers
• 48rd Magazine 
• Tools for adjustment
• PVC "TAC-41" patch