- Complete Version 2 gearbox
- M110 Spring installed
- Enter and Convert quick change spring system
If you are after a well put together complete gearbox which won't break the bank, you have found one! The Specna Arms Reinforced Gearbox with Micro-contacts is a complete V2 gearbox with a reinforced shell, 8mm bushings, and a microswitch trigger pre-installed. This gearbox sports all of Specna's usual gearbox enhancements, as well as 18:1 ratio steel gears, giving this gearbox the speed to outrun any competitors in this price range!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The complete gearbox V2 from Specna Arms is a ready to go solution for anyone with a nice M4/AR15 with a dead gearbox, or anyone in the process of custom building their own AEG. If you have ever had the *shudders* pleasure of going inside an AEG gearbox, you will understand why Specna offering this as a complete unit is a massive time and headache saver!
The gearbox shell sports reinforcements in all the key areas the venerable version 2 gearbox design is known to fail, including above and below the cylinder window. These reinforcements serve to prolong the life of the gearbox should you choose to use it in a DMR build with a stronger spring or a high rate of fire build. The gearbox sports 8mm bushings which help keep the AEG running quickly with minimal wear and maximum efficiency.
The internal components present in this complete gearbox are as follows: 8mm bushings, polymer quick-change spring guide, reinforced steel 18:1 gears, Type 0 cylinder, dampened cylinder head, air sealed piston head, polymer piston with a steel final tooth, and a polymer air nozzle. A respectable spec list, if we do say so! In fact, unless you are going for something really at the cutting edge of Airsoft performance, this setup will fulfil almost any requirement for a practical skirmish AEG which is built to last!
The trigger system within this gearbox is a micro switch trigger, providing improved trigger response and electrical efficiency when compared to standard copper contacts. This means you can spam the semi-auto all you want, without the risk of arcing causing corrosion on the trigger contacts! The gearbox is fitted with a standard M4/AR15 curved trigger, making it ideal for discrete milsim style builds.
This gearbox is wired to the rear, making it ideal for the vast majority of M4/AR15 AEGs with space for a battery in their stock or buffer tube. The pre-installed battery connector is a Mini-Tamiya, allowing you to make use of the most prevalent batteries in the Airsoft world without the need to re-wire!
Features
- Reinforced shell
- 8mm bushings
- Rear wired to Mini-Tamiya connector
- Enter and Convert quick change spring system
- Reinforced 18:1 steel gearset
- Micro-switch trigger
- Curved M4/AR15 style trigger
- Excellent internal spec - Far better than rivals in this price range!
Package Includes
- Specna Arms Complete Reinforced Gearbox V2 with Micro-Contacts
Special instructions
The spring installed in this gearbox is rated at 110m/s and should give around 400FPS when installed in an AEG with good air seal. Bear in mind that this is above UK legal skirmishing velocities, and unless you are intending to lock this gearbox to semi-automatic it will need a velocity downgrade in the form of a weaker spring before it is skirmish ready.
Specification
General
|
Internal Part Type
|
Complete Gearbox
|
|---|---|
|
Name Variant
|
Rear Wired, Front Wired,
|
Weight and Dimension
 |
Approx. 0.474kg
|
|---|
Construction
 |
Blue
|
|---|---|
 |
Alloy shell with steel gears, various aluminium, polymer and rubber internal components
|
|
Internal Part Construction
|
Polymer, Alloy, Steel, Aluminium, Rubber,
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
 |
|
|
Package Includes
|
Complete Gearbox
|
Electric Part Specific
 |
V2 Gearbox
|
|---|---|
|
Gearbox Version Compatibility Variant
|
Version 2
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.