

- Full metal construction
- High-torque or Brushless versions
- Officially licensed by Rock River Arms®
If you're after a basic M4 with premium internals, the Specna Arms Rock River Arms® SA-P01 PRIME™ M4A1 AEG is a fantastic option. A full metal build styled after the original US Army-issue M4A1 in its most stripped-down configuration, this high-performance PRIME™ build is available in either Brushless Motor or High-torque Motor versions, each with the same killer gearbox setup.
Inside, you'll find 16:1 high-speed CNC gears, a steel quick-change spring guide, 8mm J-CAGE bearings, CNC aluminium cylinder group parts, CNC aluminium nozzle, a reinforced tappet plate and a reinforced polymer piston with a full rack of steel teeth. All of these potent internals are housed inside the robust AETHER™ gearbox shell and paired with the Magnus™ rotary TDC HOP-up unit, the Helium™ HOP-up bucking and a 6.02mm stainless steel inner barrel. No need to upgrade this beast!
Officially licensed by Rock River Arms® with realistic engraved trademarks on the receiver, the SA-P01 makes a fantastic starting point for a custom AR build, giving you the PRIME™ performance in a retro platform to keep the price down. If you love customising externals but won't touch a gearbox to save your life, the Specna Arms Rock River Arms® SA-P01 PRIME™ M4A1 AEG has your name on it!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK 3-5 day Standard
£6.95
From
1-2 Working Day Dispatch UK mainland
£9.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
Suggested Accessories
Suppressors/Tracers: HASTA Nebula Mist Tracer | Specna Arms Covert Pro Suppressor | CYMA Mock Suppressor
Optics: T-EAGLE Holo Mod.IV Red Dot | Specna Arms ACOG 4x32 Scope | Theta Optics Operator Reflex Sight
Slings: HASTA Adaptive Mission Sling Gen.3 | 8Fields Two-Point Padded Bungee | 8Fields Single-Point Bungee
Dummy Bayonets: Ghost Dummy Bayonet for M4/M16 Series | Big Dragon M16 Training Bayonet (Rubber Blade)
Platform Details
Starting at the front, we can see a birdcage flash hider mounted to the 14mm CCW male threading at the tip of the 14.5-inch alloy outer barrel. This means the SA-P01 is ready to be kitted out with a tracer unit or suppressor, or an alternative muzzle device for a more customised look.
Following the flash hider, we can see the iconic M4A1 barrel profile, complete with the M203 cutout and reinforced sections to better distribute heat in the real steel. This is a big part of a realistic M4A1 build, standing out against others with smooth profiles or skinny "pencil" barrels.
Next up, we come to the M4A1-style triangular front sight post, which houses the front sight and mock bayonet lug. The lug allows Rubber M9 Dummy Bayonets to be fitted, but make sure you ask site marshals before fixing bayonets in game. The front sight itself is adjustable for elevation using an M4/AR-15 front sight adjustment tool, and for less precise work up close, it can be used as an index point for rapid aiming when there is no time for pinpoint precision.
Mounted to the bottom of the front sight assembly, we have our first sling point, which is a standard alloy footman loop compatible with a wide variety of sling types. This can be paired with any of the 3 rear sling mounting options to fit a two-point rifle sling to take the burden off your arms or allow for easy transitions to a sidearm. The perk of a relatively old-school design is that all the sling points are built in, meaning no extra adapters are needed!
Behind the front sight/gas block assembly, we come to the ribbed M4A1 polymer handguards, providing plenty of traction for wet weather use with vent ports at the top and bottom. Looking through the upper vent ports, you get a glimpse of the realistic silver-finished mock gas tube, a nod to realism often missed on replica M4s.
The handguards are held in place using a steel handguard cap at the front and an alloy delta ring at the rear. The handguards are made in two parts, allowing you to remove the lower handguard and mount an M203 launcher to the barrel for some extra firepower.
As we arrive at the receiver, we see a familiar sight: M4/AR-15 controls, with a well-placed fire selector sitting beneath a right-handed shooter's thumb, a dummy bolt catch in the centre of the receiver on the left side, and the magazine release, which is located on the magazine well on the right side of the AEG. While the controls on the SA-P01 are set up for right-handed users, they can also be operated by a left-handed user without issue after a bit of practice.
Running along the top of the receiver, we can find a 20mm Picatinny rail with a detachable M4A1/M16A4 style carry handle. The carry handle includes a "Ghost Ring" rear sight, which is adjustable for windage and elevation using the dials on the right side and below the aperture, respectively.
The carry handle is an iconic part of the 1994-era M4A1 build, but if you're planning to add an optical sight, you can remove it via the thumbscrews on the left side to reveal the receiver rail, ready for any 20mm Picatinny-compatible red dot sight or scope.
The fire selector provides 3 modes of fire: SAFE, SEMI and AUTO, which are denoted by recessed text surrounding the fire selector lever. Each fire mode has a 90-degree throw between, making it super easy to switch from SAFE to SEMI as you bring the AEG up and align the sights.
The magazine release is on the right side of the magazine well, protected by a moulded-in "fence" which protects the release from inadvertently being pushed as your rifle brushes against your kit. This is a push-through mag release which is easily operated using the trigger finger, one of the enviable handling characteristics the AR-15 platform is known for.
The charging handle can be found at the top rear of the receiver and features an extended latch which protrudes on the left side for fast access and one-handed operation. When the charging handle is pulled, the dust cover on the right side will open, and the mock bolt carrier will retract, revealing the rotary HOP-up unit within. The HOP-up allows the user to adjust the amount of backspin applied to the BB and tune it to provide optimum range and a stable flight path with different ammo weights.
The pistol grip provided on the SA-P01 is a modern, ergonomic design inspired by the best of the best when it comes to real steel AR grips, featuring a filled-out backstrap to support the web of the hand, and a more vertical angle to reduce wrist fatigue when shooting in modern stances.
Moving to the rear, we can find a 6-position M4/AR15 buffer tube, constructed from the same high-density polymer as the receiver. This keeps the build light and prevents wear from constant stock adjustments, which often removes the finish from metal buffer tubes and makes them look tatty.
The crane battery stock runs on this buffer tube and can be adjusted to any of the 6 positions by holding down the textured adjustment lever on the bottom of the stock and adjusting it to the desired length. On either side of the stock, we can find QD sling sockets, which, when coupled with a QD sling stud, can provide a flexible sling setup with quick-release functionality.
The battery compartment is inside the crane stock, accessible by squeezing the two tabs at the toe of the stock together, after which you can lift the butt plate off, remove the battery plug and make use of the stock's built-in battery compartment to house a nunchuck/crane-style battery. We recommend a 7.4V 1300mAh LiPo battery for an easy fit and perfect performance.
Internals
Inside this PRIME build, you'll find the best internals Specna Arms has to offer. These include CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced piston with a full rack of steel teeth, a reinforced tappet plate for reliable feeding, and a CNC aluminium piston head, cylinder head and nozzle for maximum long-term durability. The cylinder is also CNC machined from steel, as is the spring guide.
The improved ESA2™ quick-change spring system allows for easy power tuning without removing the gearbox from the receiver, a massive edge and a timesaver for those who love tuning to perfection. The inner barrel is also a 6.02mm stainless steel tightbore, giving you impressive accuracy and range for a short-barrelled setup. Naturally, being paired with the Magnus TDC rotary HOP-up furthers this advantage.
The HAL™ adds a whole lot of functionality into the mix, with programmable fire controls, 6 levels of pre-cocking adjustment and 5 levels of trigger sensitivity adjustment. Available fire modes include 3 or 5-round burst, binary trigger, AUG mode aka two-stage trigger, semi-auto only and sniper delay.
This PRIME platform is available equipped with the Dark Matter Brushless motor or a 22TPA High-Torque brushed motor. Both provide impressive performance downrange, though the Dark Matter is practically immune to heat build-up thanks to its brushless design. While you can always add an aftermarket brushless motor when you're ready, we recommend the brushless motor for those with a heavy trigger finger!
Features
- Full metal construction
- Brushless motor or High-Torque brushed motor - Choose your variant!
- 6.02mm Tightbore inner barrel - Superb accuracy potential
- 14mm CCW male-threaded outer barrel - Tracer/suppressor ready
- Birdcage flash hider - The perfect device for a military-issue look
- M4/M16 Front sight/gas block - Sling point & bayonet lug built-in; adjustable front post
- Ribbed polymer handguards - M4A1 wide-profile style handguards; two-part split design
- M4/M16 Delta Ring - Allows aftermarket handguards for Delta Rings to be fitted
- 20mm Picatinny railed receiver - Remove the carry handle to mount a red dot sight or scope
- Removable carry handle/ghost ring rear sight assembly - The iconic M4/M16 look
- Ergonomic pistol grip - A comfortable, modern design ideal for compressed stances
- Extended charging handle - Glove-friendly extension allows easy access to the HOP-up
- Magnus™ Rotary adjustable HOP-up unit - Inside the ejection port, accessible with the charging handle held back
- Ambidextrous sling plate - Allows for sling mounting on either side
- 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type & loadout
- Crane sliding stock - Comfortable sloped cheek rests, grippy rubber butt plate, QD sling points built-in
- Version 2 AETHER™ Gearbox:
- Reinforced Piston with steel full-tooth rack
- Reinforced Tappet plate
- CNC Aluminium piston head
- CNC Aluminium cylinder head
- CNC Aluminium nozzle
- CNC Steel cylinder
- CNC Steel quick change spring guide
- CNC Steel 16:1 gearset
- 8mm J-CAGE Bearings
- HAL™ Programmable ETU
- HAL™ MOSFET/ETU features:
- 3 or 5-round burst
- Binary trigger
- Semi-auto only
- Sniper delay
- Two-stage trigger (AUG mode)
- Adjustable pre-cocking (6 levels)
- Active braking
- Low voltage alarm
- HAL™ Programming instructions
- Rear-wired: Deans connector - Recommended battery: 7.4V 1300mAh LiPo
- Compatible with M4/AR-15 AEG magazines - S-Mag High-cap | S-Mag Mid-cap | S-Mag Mid-cap 5 Pack
Package Includes
- Specna Arms Rock River Arms® SA-P01 PRIME™ M4A1 AEG
- 125rnd Medium Capacity Magazine
Specification
Battery Included | No |
|---|
General
Platform Type | Assault Rifle |
|---|---|
Over 18 | Yes |
Defence / UKARA Required | Yes, No, |
Prebuilt | Yes |
Included Items |
|
Skill Level | Regular Player |
Warnings | Li-Po Li-Po - Never Leave Charging Unattended Li-Po - Only Use Approved Chargers Li-Po - Charge in a Fire Safe Area |
Testing
FPS, using 0.20g BBs | Approx.317fps ± 10%, using 0.20g BBs |
|---|---|
Testing Notes | Tested using 0.20g Delta Armory EAGLE BBs |
Weight and Dimension
Weight (KG) | Approx.2.93KG |
|---|---|
Length | 81cm |
Length (Extended) | 89cm |
Construction
Primary Colour | Black |
|---|---|
Construction | Alloy receiver, flash hider, delta ring, outer barrel, buffer tube, front sight & trim parts. Steel sling plate & body pins. High density polymer handguard, grip & stock. Rubber butt plate. |
Official License | Rock River Arms |
Weapon Specific
Powered By | Electric |
|---|---|
Platform | M4 / AR-15 / M16 |
Magazine Compatibility | M4/AR-15 AEG Magazines |
Fire modes | Safe Semi Automatic Full Automatic Programmable |
Safety Features | Trigger Disconnect |
Shooter Configuration | Right Handed |
Suggested BB Weight | 0.25g |
Hop-Up
HOP-Up Adjuster Type | Rotary |
|---|---|
HOP-Up Adjustment Location | Inside the ejection port, accessible with the charging handle pulled and held back. |
Furniture
Furniture |
|
|---|---|
Rail System | 20mm Railed Receiver |
Stock Type | Sliding, M4 Crane Stock, Multi-Position, |
Stock Positions | 6 |
Sight Type | Aperture Iron Sight |
Sling Options | Buffer Plate, Stock, QD, Loop, Gas Block, |
Barrel
Outer Barrel Length (in) | 14.5'' |
|---|---|
Outer Barrel Thread Type | Male |
Outer Barrel Thread Direction | CCW (Counter Clockwise) |
Outer Barrel Thread Size | 14mm |
Inner Barrel Diameter | 6.02mm |
Inner Barrel Length | 360mm |
Magazine Specific
Magazine Type | AEG, Medium Capacity, |
|---|---|
Magazine BB Capacity | Approx.125Rounds |
Electric Gun Specific Information
Gearbox
Gearbox Version | V2Gearbox |
|---|---|
Gearbox Wiring | Rear Wired |
Gearbox Quick Change Spring | Yes |
Gearbox Electronic Trigger | Yes |
Motor
Motor Type | High Torque, Brushless Motor, |
|---|
Battery Specific
Battery Voltage | 7.4V |
|---|---|
Battery Type | Li-Po |
Battery Connector | Deans |
Suggested Battery Configuration | Stick or Crane configuration |
Size guide
Joule Charts
Special Instructions
These tables can be used as a reference to see if the BB weight you are using will be over acceptable joule limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |















