- Quad rail Installed
- Full metal Externals
- 14mm CCW threaded barrel
For the Old school SEALS, this MK18 mod.0 AEG from Specna Arms provides a realistic AR replica for Milsim events with the performance and build quality to back it up. With more rail space than you probably need, you can load this bad boy down with all the tacticool extras you need to look cool and clean up on the field.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Specna Arms ONE™ series of airsoft replicas represents a significant step up from the more affordable Specna offerings, providing the user with high quality and full metal externals combined with solid uprated Specna internals and an impressive and hard wearing external finish.
This MK18 mod.0 style AEG replica provides a faithful representation of an early 2000s US Navy SEAL direct action rifle of choice. Also known as the CQBR (close quarters battle receiver) the Specna SA-B02 excels at exactly that, close quarters. The 10.5" barrel provides enough length for airsoft purposes that you will not be at a disadvantage using this CQB optimised set up outside but grants amazing manoeuvrability when clearing rooms and firing around obstacles.
Starting from the front end of the replica we can find a late gen birdcage style flash hider with a cut-out for wire cutting (you wont be using this!). This threads onto a 14mm CCW thread on the outer barrel, allowing you to add a muzzle device of your choosing. A KAC style QD suppressor suits this replica perfectly, especially if you want to imitate the mod.0 iteration of the MK18. The fixed front sight/ dummy gas block coupled with the "chopped carry handle" style rear sight provide a simple and practical solution to sighting, meaning an extremely low chance of breakage and a significantly lower likelihood of snagging on gear and equipment when compared to modern flip-up irons. The 20mm rail on the receiver provides a flexible mounting surface for an optic of your choosing. The receiver is comprised of a mix of Aluminium and Zinc alloy and is sand blasted and finished with powder coating and then anodised matt black, meaning you would be hard pressed to tell this and a real AR15 apart. Specna's own "Nano coating" finish is applied over the top, providing extra scratch resistance. All screws, pins and other structural components are made from steel, giving them a long life and preventing stripped screws if you venture into its internals. The metal receiver also features a hologram of authenticity and a unique serial number for theft prevention.
As you might expect, everything that would be metal on a real AR15 also is on this AEG. The crane style stock and finger ridged M16a2 pistol grip are made of a high-density polymer and feel great to use. The surface of these components is textured to provide positive grip over the rifle. Use of a crane style stock not only fits the MK18 mod.0 look perfectly out of the box but allows you to fit a monster battery inside with quick and easy battery changes, suiting the practical skirmisher as well as the Milsim crowd. The sliding stock mounts to an AR15 buffer tube, allowing an easy change of stocks for a custom look. Mounted to the buffer ring is a sling plate, allowing multiple options for 1 point sling configurations and can even be coupled with the provided sling loop on the front sight if you would rather use a 2 point sling solution. The magazine included in the box is a 300rnd high capacity clockwork wound design with "5.56x45mm" and "Restricted to Law enforcement and military use only" for added authenticity.
Internally this replica features Specna's Enter & Convert™ quick change spring system that means once the gearbox is removed from the body, the main spring is easily accessible for rapid changes in output power. Other internal parts include a Steel Spring Guide, reinforced Steel Gears, a lightweight Polymer Piston, Aluminium Piston Head as well as an Alloy Cylinder Head and Nozzle. The mock bolt stop is functional and allows you to make easy HOP adjustments without having to hold the charging handle to the rear. The 6.03mm diameter inner barrel provides a stock "tight-bore" barrel, aiding in accuracy and improving air seal.
If you are looking for a classic AR15 style replica from an era before negative space attachment systems and low profile gas blocks this what you want. The combination of classic styling and the ability to mount any accessory you could possibly need without purchasing extra rail sections means your SA-B02 can be as modern as you make it!
Features
- Full metal externals
- High Quality internals
- Unique serial number
- Rotary hop adjustment
- 6.03 Tight-bore inner barrel
- 20mm Railed upper receiver
- STANAG 300 round High cap
- Durable Nano coating finish on externals
- Enter & Convert™ quick change spring system
- Included rear "cut down carry handle" iron sight
- Branded: Specna Arms 5.56mm
- Rear wired: Mini-Tamiya battery connector
- Recommended battery: 7.4V 1300mAh LiPo battery in Crane/Nunchuck Configuration
Package Includes
- SA-B02 CQBR
- Instruction manual
- 300 round Hi cap mag
- Pre installed rear iron sight
- Velocity declaration certificate
Specification
General
|
Assault Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Yes
|
|
Yes
|
|
|
|
Regular Player, Experienced Player,
|
Weight and Dimension
|
Approx. 2.6kg
|
---|---|
|
69cm
|
|
78cm
|
Construction
|
Black
|
---|---|
|
Black
|
|
No
|
|
Metal and Polymer
|
|
Polymer
Alloy
Steel
Zinc
|
|
Polymer
Alloy
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
AR, M4 / AR-15 / M16, Assault Rifle,
|
|
STANAG, M4 / AR Platform,
|
|
Safe
Semi Automatic
Full Automatic
|
|
Trigger Disconnect
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.2g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Behind dust cover
|
Furniture
|
|
---|---|
|
20mm RIS / RAS
|
|
M4 Crane Stock
|
|
6 Position
|
|
Aperture Iron Sight
|
|
Buffer Plate , Loop ,
|
Barrel
Outer Barrel Length (in)
|
10.5''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.03mm
|
|
260mm
|
Magazine Specific
|
High Capacity, AEG,
|
---|---|
|
Approx. 300 Rounds
|
|
Fill Window
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
V2 Gearbox
|
---|---|
|
Rear Wired
|
|
Yes
|
|
No
|
|
No
|
Battery Specific
|
Mini Tamiya
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Crane
|
|
7.4v
|
Product Testing Data
|
308fps +/- 10%
|
---|---|
|
0.2g ASG BLASTER
|
|
7/7/21
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |