- Breathable Mesh Lower
- Anti-Fog Transparent Lens
- Modular all-in-one protection
Ever wanted a wobble free modular helmet system which went together without a hitch? Sick of trying to use an uncomfortable full face protection built from a helmet, face mask and glasses that always moves and steams up? WARQ have developed a new helmet which is the answer to all your helmet based problems!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The WARQ helmet was born out of the requirement of full face protection for Airsoft which is fully secured and wobble free. Traditionally in Airsoft players were forced to build their own full face helmet setup comprised of a random helmet, eye protection and lower face mask which usually meant that nothing would fit right, shift about during the day, and even fog up. That is now a thing of the past: the WARQ helmet fits together perfectly, with each part of the helmet fitting together securely to make a one piece system which is wobble free and provides protection from all angles.
The helmet itself is constructed from high quality and highly durable materials, comprised of Aluminium, Polycarbonate, Fiberglass, Brass, Polyamide Nylon, EPP foam, Styrene Ethylene Butylene Styrene, Rubber and Microfiber Leather. The helmet comes fully constructed with a clear polycarbonate lens and aluminium mesh lower face guard, and is rated to last the user up to 3 years.
If you're worried about customisation options, there is no need, the WARQ helmet is fully modular, with the ability to swap out the Visor, Mesh lower, and the Top, allowing you to customize the helmet to your hearts content. WARQ offer a full range of aftermarket replacements, meaning not only are you able to make the helmet your own, but should any part become damaged it is easy to swap with a replacement part.
The lens of the helmet has been specifically designed with tactical scenarios in mind, with an ultra wide field of view your vision is unhindered, and features a special anti-fog coating. The anti-fog coating is applied to the lens by the manufacturer and does not need to be reapplied over time. When cleaning the lens simply dab it using a microfiber cloth and water to ensure the coating lasts as long as possible. The lens can also be replaced with aftermarket replacements form WARQ with tinted and sticker printed options available. For peace of mind the lens is rated EN166A for ballistic and mechanical resistance.
The lower half of the helmet features a high density and durable thick hex pattern mesh which protects your mouth and teeth from incoming BBs whilst at the same time being highly durable. Any Airsoft or Paintball player will tell you what a nightmare full seal face protection usually is, but not with the WARQ mask. Air can flow freely into the helmet whilst keeping everything else out, for a more comfortable an sweat free skirmish experience.
The helmet can also be further customised with a range of aftermarket parts thanks to its external modular systems. The side of the helmet features helmet rails allowing the attachment of lights, cameras and any other 20mm style attachments. The front of the helmet features a FAST style mount plate which allows for the attachment of Nighvision goggles, or more popularly GoPro and other Action Cameras with the use of an adaptor.
The helmet is easy to fit, with a winding wheel at the back which allows you to adjust the tightness of the helmet without even removing it. Simply put on the helmet and wind the wheel until it becomes tightly locked to your head. Internally the foam pads are also movable, and are attached via a Velcro system making them easy to move, remove and install to perfectly fit your head. The helmets straps are also very high quality, and are covered with a soft fabric on the contact points with the wearers head.
This helmet is perfect for those safety conscious Airsoft players who want protection from anything an Airsoft Skirmish can throw at them. Being scared of low flying BBs, Sniper Rounds, Tag Rounds, Rocks, Branches and more are a thing of the past. Run head first into combat with a smile on your face!
WARQ: You set the limit.
Features
- Raptor Textured Helmet Top
- Full face helmet protection
- Wobble free construction
- Comes pre-built and ready to go
- Based on a fast style helmet
- Designed for heads between 56cm - 62cm in circumference
- Heavily customisable
- Modular helmet system
- Helmet top, visor, and lower face can all be replaced
- Maximum comfort
- Wide field of vision lens
- EN166A ballistic and mechanical resistance
- Pre-coated Anti-fog lens
- Built to last up to 3 years
- Constructed from high quality materials
- Breathable and durable mesh lower face
- Clear lens fitted
- Front NVG attachment point for nightvision or camera mounts
- Fully adjustable internal retention kit
- Fitting adjustable via a winding cog at the rear of the head
- Can be tightened or loosened easily without removing the helmet
- Felt lined forehead strap, side straps, rear strap and chin strap
- Removable / replaceable internal foam padding secured by Velcro
- Nylon Bungee harness to hold NVG and attachments in place
- Easy to clean and maintain
Package Includes
- Standard Advanced Full Face / Head Helmet Protection System
- Instruction Manual
- WARQ Small Patch
Special Instructions
Always read safety instructions before use, and only use WARQ approved accessories and attachments.
For transportation we highly recommend that you also purchase the WARQ Transportation Bag, which protects the lens and helmet from damage and scratches during transit.
For cleaning and maintaining the helmet you should use water. If you use any other products please ensure they do not come into contact with the Lens as this could cause damage and wear the anti-fog coating. To clean the lens use only a soft, slightly damp, microfiber cloth, and blot not rub.
Do not use cleaning products. Do not apply anti-fog gel, spray, or similar products to the active anti-fog coated lens. This can cause undesirable reactions or irreparable deterioration of the coating. After cleaning your helmet we recommend you store the helmet inside a WARQ bag in a cool, dry, place, avoiding exposure to prolonged light.
Specification
General
Tactical Equipment Type
|
Glasses, Goggles, Helmet, Face Protection,
|
---|---|
|
No
|
Weight and Dimension
|
Approx. 1.1kg
|
---|
Construction
|
Black
Olive Green
Grey
Dark Earth
|
---|---|
|
Constructed with a Polymer Shell, Polycarbonate Lens, Mesh Lower Face Protection and a Fabric Retention System
|
|
|
Wearable Specific
|
56cm
57cm
58cm
59cm
60cm
61cm
62cm
|
---|