Two-Tone Airsoft Assault Rifles

If you like your M16 rifles with a side of M203 grenade launcher, the Specna Arms SA-G02 ONE™ M16A4 w/ M203 Launcher; Kestrel Basic ETU is the rifle for you! This full-metal M16 is based on Specna's ONE™ series but this one is a cut above the rest, featuring the Kestrel Basic ETU. This MOSFET is programmable and offers different firing modes along with plenty of other features, the term "Basic" is definitely underselling it!

The Kestrel Basic offers plenty of features including a 3-round burst and binary trigger firing modes, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with the 6.03mm tightbore inner barrel and rotary HOP-up unit, this M16A4 AEG is well-equipped to complete any mission!

If you are working on a 2000s military loadout and need an M16 with some extra "firepower", the Specna Arms SA-G02 ONE™ M16A4 w/ M203 Launcher; Kestrel Basic ETU has got you covered!

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long. 

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long. 

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you are looking for a starting point for a Milsim appropriate DMR rifle, you have found one of the best options! The Double Bell MK12 MOD.0 SPR is modelled closely on the real MK12 MOD.0 Special Purpose Rifle issued to the special operations forces of both the US Army and US Navy. This rifle features an 18-inch outer barrel with an OPS Inc. style muzzle brake, a PRI Gen2 style free-floated tubular handguard with removable rail sections and an ARMs style "Swan" rail riser sleeve, making it a perfect match for DMR rifles issued to USSOCOM during the global war on terror era.

A modernised AK-74 6mm Airsoft AEG Replica, with a ergonomic polymer Hand Guard, Moulded Grip and folding Solid Stock. The Rifle is constructed with an Alloy body, with Polymer Hand Guard, Grip and Stock.

If you are interested in WW2 re-enactment or you have a thing for old-school firearms this should bring a smile to your face! The AGM MP-44/StG-44 AEG has the full metal construction and real wood stock any authentic replica of the real StG-44 needs, and is based internally on M4/AR-15 parts, meaning upgrades are a go!

 The StG-44 came about during WW2, issued to German Wehrmacht troops serving on the Eastern Front as an alternative to submachine guns which were the urban fighting tool to have prior to the assault rifle. Fast forward 80 years and the StG-44 is still appearing in conflict zones such as Syria and Ukraine, a testament to its forward-thinking design and effectiveness way beyond its intended lifespan.

Being constructed entirely from alloy and steel with a real wood stock to top it off, AGM's StG-44 is absolutely worthy of replicating this game-changing firearm design and tips the scales at around 3.9KG, giving us the appropriately hefty and realistic feel we expect for a WW2 rifle replica. Internally we have an alloy version 2 gearbox and an M4/AR-15 style gear adjustable HOP-up unit, both of which are fully compatible with aftermarket upgrades; perfect for performance seekers. Whether you are re-enacting WW2 scenarios or you need an interesting platform for a modern OPFOR or rebel loadout, the AGM MP-44/StG-44 is the change of pace you need!

If you are in search of a full metal, licenced AEG replica of the latest HK416 variant to hit the market, this is the one! The Umarex H&K HK416 A5 AEG Rifle is built like a tank and looks absolutely incredible thanks to its high-quality finish and borderline insane attention to detail. Boasting officially licenced Heckler & Koch trademarks via Umarex along with precisely machined CNC aluminium parts and a steel outer barrel, it comes as no surprise that this HK416 is the best built on the market right now!

On the inside, the HK416 A5 features the VFC version 2.1 gearbox, meaning an ambidextrous fire selector lever and bolt catch are also present to give the realism fans what they deserve, together with full compatibility with version 2 gearbox internals. The HOP-up unit is a modern rotary design, keeping pace with rival platforms, and the internal MOSFET system keeps electrical efficiency at its peak and prevents the usual issues with electrical arcing occurring over time. If you are looking for an HK416 A5 AEG replica that is nearly impossible to tell apart from the real thing, this is what you need!

If you are in search of a full metal, licenced AEG replica of the latest HK416 variant to hit the market, this is the one! The Umarex H&K HK416 A5 AEG Rifle is built like a tank and looks absolutely incredible thanks to its high-quality finish and borderline insane attention to detail. Boasting officially licenced Heckler & Koch trademarks via Umarex along with precisely machined CNC aluminium parts and a steel outer barrel, it comes as no surprise that this HK416 is the best built on the market right now!

On the inside, the HK416 A5 features the VFC version 2.1 gearbox, meaning an ambidextrous fire selector lever and bolt catch are also present to give the realism fans what they deserve, together with full compatibility with version 2 gearbox internals. The HOP-up unit is a modern rotary design, keeping pace with rival platforms, and the internal MOSFET system keeps electrical efficiency at its peak and prevents the usual issues with electrical arcing occurring over time. If you are looking for an HK416 A5 AEG replica that is nearly impossible to tell apart from the real thing, this is what you need!

If you've been weighing up your options in search of an M4/AR-15 PDW to take on those tight corners in CQB, your decision just got harder! The Double Eagle M923A DEK762 AEG is packing the same awesome FALCON EFCS MOSFET as the previous D.E UTR series releases in a uniquely designed AR PDW body with an M-LOK handguard, sound amplifying muzzle device and compact PDW stock which doesn't compromise when it comes to battery space.

With Double Eagle's usual compliment of pre-upgraded internals including a 6.04mm tightbore inner barrel, 8mm ball-bearing bushings, a quick change spring system, a rotary adjustable HOP-up unit and 11.1V LiPo compatibility, the DEK762 absolutely meets the mark when it comes to performance and is ready for any M-LOK or 20mm accessories you can throw at it. Whether you are seeking a new CQB primary or you need a backup to your sniper rifle with a bit more firepower, the DEK762 would be a serious asset in game!

If you've been weighing up your options in search of an M4/AR-15 PDW to take on those tight corners in CQB, your decision just got harder! The Double Eagle M923A DEK762 AEG is packing the same awesome FALCON EFCS MOSFET as the previous D.E UTR series releases in a uniquely designed AR PDW body with an M-LOK handguard, sound amplifying muzzle device and compact PDW stock which doesn't compromise when it comes to battery space.

With Double Eagle's usual compliment of pre-upgraded internals including a 6.04mm tightbore inner barrel, 8mm ball-bearing bushings, a quick change spring system, a rotary adjustable HOP-up unit and 11.1V LiPo compatibility, the DEK762 absolutely meets the mark when it comes to performance and is ready for any M-LOK or 20mm accessories you can throw at it. Whether you are seeking a new CQB primary or you need a backup to your sniper rifle with a bit more firepower, the DEK762 would be a serious asset in game!

Calling all Recoil loving Airsofters, your time has come. The Heckler & Koch HK417 licensed by UMAREX and manufactured by VFC is here and Damn Boi HE THICC! Fully licensed by Heckler & Koch, this awesome Gas Blowback Rifle is a must have for the recoil hungry player looking for the ultimate immersion experience. This the the Generation 2 version, featuring a newly designed HOP-up adjuster which is much easier to operate!

If you're looking for a lightweight but menacing AR platform, the Specna Arms SA-FH07 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is perfect for you. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH07 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

If you're all about performance and demand an intense rate of fire the WELL PRO WE07 M4/AR-15 DSG AEG; Kestrel Basic ETU is sure to impress you! This predominantly high density polymer M4/AR-15 platform is all about speed, tipping the scales at a minuscule 2kg and rocking what is known as a Dual Sector Gear. The DSG effectively doubles the rate of fire to a phenomenal 30 rounds per second by cycling the piston twice per rotation of the gears, providing a Vulcan Cannon-like rate of fire in a lightweight and highly agile package!

Inside, the pre-installed Kestrel Basic ETU brings some advanced functionality to this speedy setup; offering programmable fire modes including 3 round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The good stuff isn't exclusive to internals either; the WE07 boasts an M-LOK handguard, 14mm CCW male threaded barrel and 20mm Picatinny railed receiver, ready to be dressed up with accessories to suit your personal needs. If you move fast and need a speedy platform to match, the WELL PRO WE07 M4/AR-15 DSG AEG; Kestrel Basic ETU is about as fast as they come!

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament KU905 AUG Full Rail AEG is a unique modern take on the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard.

The KU905 boasts full metal construction, a pre-installed MOSFET and a quad-railed handguard with an integral suppressor, and is a more modern iteration of the AUG with plenty of 20mm rails on the stock/chassis for the addition of accessories. If you need an AUG that can be kitted out like an M4 and has a unique look as a bonus, the KU905 will do everything you need it to!

If AK platforms are right up your alley and you're in the market for an affordable AK-12 rifle with the added benefit of some borrowed design features from the funky AK-205, then the WELL PRO WE09 AK-12 AEG Rifle w/AK-205 Stock should definitely interest you! This updated version of the platform is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-205 stock and enhanced pistol grip.

This full high-density polymer AEG is lightweight and perfect for players who don't want tired arms after a day of carrying their rifle around. The polymer, however, does not mean that this AEG isn't durable. It will survive the tribulations of any skirmish with minimum cosmetic damage. The optical MOSFET is a nice addition to this AK-12 and allows the fire selector to be programmed for alternative modes of fire such as burst modes or binary trigger. This paired with the 6.03mm tightbore inner barrel allows for excellent accuracy potential straight out of the box.

Whether you are fixed on an AK-12 or you are contemplating the available AK platform options, the WELL PRO WE09 AK-12 AEG Rifle w/AK-205 Stock would make a fantastic, affordable and up-to-date primary for any modern Russian military or PMC loadout!

If you need a light and tight platform for CQB but nothing on the market currently scratches that itch, the Double Eagle M923C DEX556 AEG; Kestrel V2 ETU may well be the one! This M4/AR-15 style AEG is constructed primarily from high-density polymer with alloy and aluminium parts where needed and is packing the seriously slick Kestrel V2 ETU pre-installed for a frightening trigger response.

To deliver rounds accurately onto any unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle M923C DEX556 will see you well-equipped!

This lightweight and incredibly effective Airsoft Electric Gun is powered by a Battery in the Stock, and features Double Eagle's Fire Control System, which allows for programmable Trigger Modes (including Binary Fire), as well as giving you excellent Trigger Response. The package is completed by a Quick Change Spring System, making it suitable for just about any field! If you want to be light on your feet and as effective as all the 'modded/custom guns' without having to break the bank, the Double Eagle M904 Falcon Fire Control Series are the perfect choice.

An electric powered 6mm Airsoft replica of the venerable G3 platform complete with integrated bipod, which was originally designed in the 1950s but has proven to be such a successful platform that it has seen updates all the way through to being in current use with military groups around the world.

If you are after an authentic looking AK74 with solid internals and an electric blowback system the APS AK74 is certainly worth a look! This AK is styled after the original AK74 issued to the Soviet Red Army during the 1970s, seeing service in Afghanistan before being supplemented by the AK74M in the early 1990s.

The AK74 EBB boasts real wood furniture with a smooth and authentic matt varnished finish and majority steel construction for the hefty and authentic feel you can only get from a properly built AK replica. To make things even more realistic, this AK has been worn down in all the key raised edges with a subtle but authentic battle-worn finish which provides a unique look without going over the top. If you like an AK with a well-loved look, this one would be a fine choice!

If you've got your eye on an AK but you have limited storage space, the AKMS is the ideal AK AEG for you. This example, the CYMA CM.048SU AEG hybridises the AKMS modernised underfolding AK with the thumbhole handguard of the AKMSU rifle to create a unique AK variant which keeps the classic AK steel and wood format but steps aside from the "issued" style for more of a PMC aesthetic.

Not content with providing the fantastic external quality CYMA's CM.04X AK series is known for, the internals of this AK replica have been upgraded with a wide range of enhancements, including a silent piston head and cylinder head, high torque motor, 7mm ball bearing bushings and an alloy adjustable HOP-up unit paired with a 6.03mm tightbore inner barrel to top it all off. If you want a unique looking AK replica with loads of steel parts, wood furniture and the performance to stay ahead in game, the CYMA CM.048SU AEG is the perfect choice!

If you need a sneaky primary for mid to long-range, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG should be on your shopping list. This full metal M4/AR-15 AEG boasts Delta Armory's best internals yet, kitted out on the inside with Delta's programmable MOSFET/ETU system, a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The Delta MOSFET/ETU offers the option of 3 or 5-round burst, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.

Externally, this beast is ready for DMR duty, boasting a lengthy KeyMod handguard for accessories and an integral suppressor for that stealthy styling. Add an LPVO scope and the look is complete, whether you're going for a full high-FPS DMR build or simply seeking an accurised assault rifle. If you like integrally suppressed AR builds and are looking for a longer alternative to the common short configurations, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG is a fantastic choice!