New Airsoft Guns & Products

If you need more firepower for your tri-shot shotgun, this mag adapter is the key! The Battleaxe M4/AR-15 AEG Magazine Adapter for M870 Shotguns allows your tri-shot M870 shotgun to be fed from common M4/AR-15 AEG magazines, offering a significant capacity boost so you can stay in the fight for longer!

Like shotgun drum magazines, the installation of this adapter requires the removal of the shell port door of your shotgun. This can be a permanent mod on some M870 shotguns, so please bear this in mind before purchasing. With this adapter on board, you can feed your shotty with M4 AEG high-cap mags or mid-cap mags in a range of styles, giving you insane firepower on the field without the bulk of a drum mag!

If you're after a safer alternative to a LiPo power source with no sacrifice in trigger response or rate of fire, the 9.6V 1600mAh NiMH Crane Stock Battery from Big Foot is ideal. An 8-cell NiMH battery pre-wired to a mini-Tamiya battery connector, this battery is configured in two cell groups, known as a "nunchuck" or "crane stock" battery. This allows it to fit into the cheek pieces of the common crane stock and other similar stocks like the Delta Armory Stock and the PTS EPS Stock.

As with any NiMH battery, this battery should only be charged on compatible NiMH chargers and never left attended while on charge. We also recommend charging any battery in a Battery Safe Charging Bag just in case. Being a 1600mAh battery, this should power almost any mini-Tamiya connector-equipped AEG for several hours of intense gameplay, though if you're out in the field all day, we recommend grabbing a second to stay in the fight for longer!

If you're searching for an advanced MOSFET for your version 2 gearbox-equipped AEG, the Gate ASTER II Bluetooth® & Quantum 2 Trigger for V2 Gearbox; Rear-wired is ideal. A cutting edge advancement over the original Gate ASTER MOSFET, the ASTER II boasts several quality of life improvements, more customisation options than ever before and Bluetooth 5.2 connectivity built-in, allowing you to change settings wirelessly on your smartphone or mobile device.

The ASTER II electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. Other programmable options include adjustable pre-cocking and adjustable active braking; perfect for the techy types to set their primary up to suit practically any build objective.

This set also includes the Gate QUANTUM 2 CNC trigger which is compatible with M4/AR-15 AEGs but unfortunately won't work with SMG-5 or G3 platforms. When installed, the Quantum 2 trigger offers 250 trigger sensitivity options via the ASTER II's optical sensors and also includes a grub screw to provide over-travel adjustment. Constructed from CNC-machined aluminium, the Quantum 2 looks great and allows the ASTER™ to take full advantage of its optical trigger sensors and tune the trigger feel to suit your exact requirements.

The ASTER II is compatible with any version 2 gearbox-equipped AEG and can also be used with the Gate PULSAR Single-Solenoid HPA Engine if you add the ASTER II-specific HPA cable. If you're ready to turn your Airsoft gun into a Space Gun, the Gate ASTER II Bluetooth® & Quantum 2 Trigger for V2 Gearbox; Rear-wired is calling your name!

If you're a true patriot, Cybergun COLT® Red / White / Blue 0.20g BBs; 1000rnd Bottle are the BBs you need! High-quality 0.20g BBs made from red, white and blue polymer, these BBs allow you to give the enemy team a taste of freedom with each shot!

These BBs are 0.20g in weight, making them ideal for standard AEGs in close quarters, along with general use in pistols and shotguns. With tight tolerances guaranteeing only 0.01mm deviation between BBs at maximum, Cybergun's COLT® BBs don't compromise on quality, just in case the colour scheme doesn't already have you convinced!

If you're looking for spare batteries for your EMG JW3 AEP, this Specna Arms Gens Ace 7.4V 25C 620mAh G-Tech battery for AEPs is ideal! A 7.4V 2S LiPo with 620mAh capacity, this battery is pre-wired to a mini-Deans connector and a G-Tech balance plug. The G-Tech balance plug allows you to charge this battery on either a standard LiPo balance charger or the advanced G-Tech Charger from Gens Ace.

During our testing, we found this battery to be an incredibly tight fit in most AEPs, so we only recommend it for the EMG CM.138 JW3 AEP. Please note, if you do attempt to install this battery on other AEPs, it is likely you will damage the outer coating, which will invalidate your warranty. If you need to keep your JW3 AEP in the fight for longer, the Specna Arms Gens Ace 7.4V 25C 620mAh G-Tech battery for AEPs is the way to go!

If you're running the super-speedy SSP28 GBB from Novritsch, here's how you get on target even faster! The Novritsch SSP28 Red Dot Plate can be mounted to place your red dot sight in a forward or rearward position, giving you the versatility to set your SSP28 up to suit your exact needs. The plate is made from CNC machined aluminium and includes the screws you'll need to mount it.

This mount plate is designed to fit Novritsch's Micro Red Dot V2 and Premium Micro Red Dot V3, but also fits any micro red dot sight with the DeltaPoint Pro® footprint/mounting standard. If you want to take full advantage of the SSP28's speed, add a red dot sight and you won't look back!

If you're running an AEG or HPA setup equipped with a Gate ASTER V2, ASTER II V2 or TITAN II V2, this innovative upgrade is worth a look! The Gate TACTICKER Realistic Trigger System is designed to provide a more realistic trigger feel and more trigger tuning options than ever before, offering adjustment between a super light and short speedsoft style trigger and a realistic heavy trigger pull with a tactile click to simulate trigger break and reset. Also available is a "two-stage" trigger mode, allowing you to simulate real steel "match" triggers designed for maximum accuracy.

The TACTICKER is compatible with ASTER V2, ASTER II V2 or TITAN II V2 MOSFETs but won't work with standard trigger contacts or the original Gate TITAN MOSFET. If you love the feel of a GBBR trigger and want to give your AEG the same energy, the Gate TACTICKER Realistic Trigger System will do just that!

If you need mags to keep up with your SSP28's insane rate of fire, these are the ones! Patterned after real steel Glock mags with a +2 round extension, the Novritsch 30rnd SSP28 Green Gas Magazine is made with an alloy shell, polymer feed lips, a polymer baseplate, brass valves, a rubber gas route bucking and rubber O-rings.

The fill valve is located on the baseplate, and to fill it with gas, you will need to invert the mag and your gas can, as is the case with other GBB pistol mags. Loading BBs can be done either through the feed lips on the top or through the widened follower channel on the front by pulling down the follower. Please note, this magazine is only compatible with the SSP28 GBB and won't fit the SSP18, TP22 or any other EU series GBB we have tested. 

If you're working on a beast of a build bristling with all the best parts out there, this is the motor you need to finish it off! The Gate G5 Smart Brushless Motor combines brushless motor technology with a programmable ESC module, allowing you to adjust the motor revolution rate between 10K RPM right up to an insane 46K RPM!

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque-to-weight ratio than conventional motors. The lack of brushes means there is less to go wrong, and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. Another brushless motor perk is their ultra-low heat build-up, ensuring you get let rip with long, lavish bursts guilt-free!

While a brushless motor really is a game-changer once installed, we only recommend adding one to your build if you're confident working on Airsoft internals and are ready to reinforce the right parts to keep it running. If you're the techy type and want to keep your primary at the cutting edge of Airsoft performance, the Gate G5 Smart Brushless Motor belongs inside!

If you're looking for a strong and lightweight nozzle for your Airsoft AEG, this is worth a look! The FGATE CNC POM Sealed Nozzle with O-Ring for Airsoft AEGS is made from CNC POM polymer, a massive upgrade from the factory polymer nozzles present in most Airsoft platforms. The nozzle also includes an internal O-ring to maximise air seal, and its ultra-strong POM construction is ideal for high rates of fire or high FPS setups.

You can get a nozzle that is perfectly sized for the majority of Airsoft AEGs, including AKs, M4/M16 and SR25 rifles. So if you want to up your platform's consistency or you're looking for a replacement part, this is a great piece to pick up!

If you're looking for a strong and lightweight nozzle for your Airsoft AEG, this is worth a look! The FGATE CNC POM Sealed Nozzle with O-Ring for Airsoft AEGS is made from CNC POM polymer, a massive upgrade from the factory polymer nozzles present in most Airsoft platforms. The nozzle also includes an internal O-ring to maximise air seal, and its ultra-strong POM construction is ideal for high rates of fire or high FPS setups.

You can get a nozzle that is perfectly sized for the majority of Airsoft AEGs, including AKs, M4/M16 and SR25 rifles. So if you want to up your platform's consistency or you're looking for a replacement part, this is a great piece to pick up!

If you're looking for a strong and lightweight nozzle for your Airsoft AEG, this is worth a look! The FGATE CNC POM Sealed Nozzle with O-Ring for Airsoft AEGS is made from CNC POM polymer, a massive upgrade from the factory polymer nozzles present in most Airsoft platforms. The nozzle also includes an internal O-ring to maximise air seal, and its ultra-strong POM construction is ideal for high rates of fire or high FPS setups.

You can get a nozzle that is perfectly sized for the majority of Airsoft AEGs, including AKs, M4/M16 and SR25 rifles. So if you want to up your platform's consistency or you're looking for a replacement part, this is a great piece to pick up!

If you like to record your Airsoft escapades for training or showing off, the Runcam 4K Helmet Camera Recorder for ARC Rail/Velcro will suit you perfectly! A compact alternative to GoPro, DJI OSMO and other action cameras, the Runcam 4K Helmet Camera mounts to either ARC rails found on FAST helmets or Velcro, allowing it to be helmet or hat mounted.

Amongst its many features, the 4K Helmet Camera is also capable of being connected to your phone via Wifi, allowing you to view previews of your footage almost immediately via the RunCam app. This is great for ensuring the viewing angle is perfect, an essential feature given the Helmet Camera's 90° lens rotation function and flexible stem.

The 4K Helmet Camera records to micro SD cards of U3 class and above (not included) and is powered by a rechargeable and replaceable 18650 battery (pre-installed), making it economical to run and allowing you to keep spare batteries on hand to record all day long. If you want to get into Airsoft filmmaking without diving in too deep financially, the Runcam 4K Helmet Camera Recorder for ARC Rail/Velcro is ideal!

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you want to make the most out of the SSP28's superb performance, an optical sight will work wonders! The Novritsch SSP28 20mm Picatinny Top Rail is designed to allow any 20mm Picatinny compatible red dot sight or scope to be mounted, ideal for speeding up target acquisition and improving long-range accuracy.

The mount can be oriented to present the 20mm Picatinny rail either towards the rear or the front, depending on your preferences and other considerations such as eye relief. This is a 4-slot Picatinny rail, making it ideal for compact red dot sights but suitable for anything which can mount to a short length of 20mm rail. If you want to get on target faster with the super-speedy SSP28, this mount will get you that bit closer!

If you're getting geared up to run HPA, the Novritsch HPA Regulator V2 is essential! This HPA regulator is the V2 model, improving on the original Novritsch Regulator with a higher maximum output pressure and a new method of adjustment using a convenient key tool included with the set. This reg set is compatible with both standard and SLP (super low pressure) HPA tanks, but only works with US Spec adapters and bottles, not EU spec.

The integral tournament lock allows you to lock off your regulator to keep the pressure constant and within site limits using a standard zip tie, keeping site marshals happy. If this is your first foray into HPA, we recommend reading the "Special Instructions" section of the full product description before ordering. If you're about to grab yourself a Novritsch HPA SMG-5 Magazine Adapter forHi-Capa orEU-Series, this is the line and reg you need!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!

If your next build will be a beast of a DMR, the East Crane EC-903 SR-25 PC DMR AEG; Advanced Edition would make a fine base gun! Mechanically pre-locked to semi-automatic only and equipped with internals ideal for DMR conversion, the EC-903 boasts full metal construction and fantastic attention to detail, inspired by the most recent SR-25 DMR variant, known as the SR-25 PC (Precision Carbine).

On the outside, the EC-903 Advanced is rocking a CNC aluminium URX4-style M-LOK handguard, KAC-inspired QDC flash hider and ambidextrous 20mm Picatinny railed receiver, QD sling sockets throughout the build and an AR-15 AEG spec buffer tube at the rear, pre-fitted with a high quality Crane stock replica. Inside, we're treated to the Version 2 long gearbox, featuring a long polymer piston with a full steel tooth rack, long type 0 cylinder, 18:1 steel gears running on 8mm ball-bearing bushings and a quick change spring guide for easy power tuning. The inner barrel is also a 6.04mm tightbore, offering enhanced accuracy and a slight FPS boost from the same strength spring.

If your DMR build needs to be modern, metal and menacing, the EC-903 SR-25 PC DMR AEG; Advanced Edition from East Crane is the way to go! With the prerequisite .308 style DMR looks to set it apart from standard AR-15s, modern furniture ready to be customised and internals with plenty of pre-upgrades thrown in, the EC-903 is ready to harass the enemy team at long-range!

If your finger slipped when cutting your Shadow Foam insert, this glue will help you fix it! 151 Adhesives Fantastic Elastic Flexible Glue is recommended by Shadow Foam for any repairs to its inserts, allowing you to reattach mistakenly cut foam and make the error barely noticeable.

Fantastic Elastic glue is also great for securing Shadow Foam into your case, drawers or wherever you need it. Whether you have a repair to make or you like to be ready for a worst-case scenario, 151 Adhesives Fantastic Elastic Flexible Glue for Shadow Foam is the ideal addition to the toolbox!

If you need more mags for your NUPROL Tango T96, Well MB-06 or ASG Urban Sniper Rifle, this is the one! The NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is a spring loaded low-capacity magazine which holds 24 BBs, loaded through the feed lips on the top either by hand or using a speed loader.

This magazine is compatible with the NUPROL Tango Series T96, ASG's Urban Sniper Rifle, the WELL MB-06 Spring Sniper Rifle and the Maruzen APS SR2 Sniper Rifle on which the design is based. If you need more mags to keep your bolt-action in the fight, the NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is ideal!

If you have an ARCTURUS AK in your arsenal and need some spare magazines for the battlefield, look no further! The ARCTURUS 30/130 Adjustable Mid-Cap for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

The magazine's capacity can be adjusted from a real capacity of 30 to a more fitting capacity for Airsoft, of 130 rounds. To adjust it, remove the magazine from the shell, and there is a switch that can be moved, one side for 30 rounds and one side for 130 rounds.

If you're looking for a cheap HOP-up upgrade with no performance compromise, the S&T ZCI Rotary HOP-Up Unit for M4/AR-15 AEGs is ideal! Widely respected by techs, this polymer rotary HOP-up chamber is made by ZCI Leopard, boasting wide compatibility and tight tolerances, producing superb results with a wide variety of AEG HOP-up bucking and nub combinations.

The set includes everything you need to assemble the HOP-up unit, other than the inner barrel, packaged with a silicone HOP-up bucking designed and a standard cylindrical nub ideal for medium power replicas (350 FPS and up). If you're all about cost-effective upgrades, the S&T ZCI Rotary HOP-Up Unit for M4/AR-15 AEGs belongs in your parts stash!

If you're into Russian firearms designs and fancy an SMG, the ARCTURUS PP-19-1 Vityaz AEG w/Optical MOSFET should please you! Based on the real steel PP-19-01 Vityaz-SN, this beastly replica is made almost entirely from steel, with the exception of its realistic polymer handguards and pistol grip. Naturally, this gives the PP-19-01 enormous weight for such a compact platform, ideal for realism fans but not for the faint of heart!

Inside, the PP-19-01 brings more good things to the table! Based around a version 3 gearbox shell with a pre-installed Optical MOSFET to provide programmable fire modes, improve the trigger response and protect the internal circuitry from excess wear. Also inside is a 25K high torque motor, an 18:1 CNC Steel gear set, a 6.03mm stainless steel tightbore inner barrel and a plethora of reinforced gearbox internals. Minimum upgrades are required with this AEG, that's for sure!

With an external build which makes it genuinely hard to distinguish from the real thing, pre-upgraded internals with a focus on reliability and a sprinkle of advanced features thrown in, this Vityaz SN is one of the best replicas currently available. If you need an SMG to complement your AK or want a unique, head-turner of a primary with incredible externals and impressive down-range effect, you're in good hands with the ARCTURUS PP-19-1 Vityaz AEG w/Optical MOSFET!