All Electric Parts

If you've had motor issues and need a cheap replacement, here you go! The VFC Long Shaft Ferrite Motor is a standard-speed long shaft motor for M4/AR-15, SMG-5 (not K), G3 and P90 AEGs. The set includes a pre-installed O-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

If you are lucky enough to have an AEG with the superb Perun V2 Hybrid MOSFET installed, here is how you make it more realistic! The Perun Clicker is designed to work with the V2 Hybrid MOSFET and provides a tactile click when the trigger is pulled, along with a tactile reset. This gives the trigger a far more realistic feel, and while not close to the feel of a real trigger, is far more exciting to use than a normal AEG trigger. 

If you are looking for an upgraded motor for improved trigger response, or something capable of pulling heavier springs, this will do the trick! This motor from Krytac is a high performance motor setup with a steel pinion gear pre-installed.

The motor is available in either the 20K performance or 30K high torque versions, giving you an option for any build and one for high performance DMR platforms, depending on your build objectives. The motor comes with connections for spade connectors and includes the motor height spring. This motor is a long shaft type, which fits M4/AR15 AEGs and SMG-5 replicas, but not the PDW or K models.

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

A replacement or upgrade air nozzle for MP5 models of Airsoft Electric Gun, with an O-ring installed for greater air seal and efficiency.

A series of Selector Plates from Modify, which are available for a range of AEGs.

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running a P90 and want to spice it up a notch, the Perun Optical MOSFET/ETU for P90 AEG is what you need to take your P90 to the next level. This advanced MOSFET/ETU uses optical sensors to speed up your P90 and provide programmable functions, including burst mode, binary trigger, adjustable active braking, adjustable pre-cocking, trigger sensitivity adjustment and compatibility with dual sector gear setups.

Make no mistake, this MOSFET rivals the incredible Gate TITAN and ASTER series in the functions and performance it provides. Unlike the Gate 'fets, the Perun is designed specifically for TM P90-based AEGs, meaning no compatibility worries and a relatively easy installation process. If you want your P90 to shoot like an upgraded M4 platform, this is how you do it!

Redesigned for maximum compatibility with a wide variety of brands, the RetroArms CNC QSC Gearbox V2 is ideal for technical Airsofters working on a high-performance build which needs to last a lifetime. The set includes a Version 2 gearbox shell, carbon steel screws and a steel ball bearing spring guide and is ideally used for extremely high ROF or FPS builds. 

The shell itself is precision machined using CNC technology from the best aluminium around; 7075 T651, an ultra-hard alloy with similar strength properties to steel, boasting an ultimate tensile strength of 590 MPa compared to construction steel's 390 MPa. The quality of the machining simply cannot be overstated; every surface is flawlessly smooth and finished to perfection. 

Not content with making an absolutely beautiful gearbox from the finest materials around, the team at RetroArms has also put a lot of thought into the design aspect, improving on the original Tokyo Marui V2 gearbox in several areas. The piston tracks and selector plate rails have been redesigned for wider compatibility, the front of the gearbox is enlarged in every dimension to improve strength, "glue pockets" have been added around each bearing hole so they can be glued in and wider internal wiring routes for heavy gauge wiring, along with much, much more. If you're the techy type seeking a slick gearbox shell to start your build, the RetroArms CNC QSC Gearbox V2 is exactly that!

A replacement or upgrade air nozzle for Airsoft electric SMG-5Ks.

If you're the techy type looking to get your hands on affordable spares, the CYMA Tappet Plate for V3 Gearbox belongs in your bits box! This original replacement part is constructed from high-density polymer, designed for V3 gearbox-equipped AEG replicas such as the SMG-5K, AUG, AK and AR36. Whether you've got a platform to repair or you want to be ready in case anything fails, the CYMA Tappet Plate for V3 Gearbox is a handy part to have around!

A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position.

If you're looking for an upgraded nozzle for your CZ Scorpion EVO, Maxx Model has what you need! The CNC Aluminium Air Seal Nozzle for ASG CZ Scorpion EVO 3A1 is finished in metallic red and made from CNC-machined aluminium, ensuring it is perfectly in spec and strong enough for upgraded setups. This nozzle measures 18.5mm in overall length, making it a perfect fit in the ASG CZ Scorpion EVO 3A1 AEG!

An AEG cylinder head for version 2 gearboxes found in M4/AR15 AEGs and SMG-5 AEGs. This KRYTAC part features a dampening pad, intended to reduce the noise from the piston impacting the cylinder head and give you a smoother sounding gearbox. The cylinder head is constructed from high density polymer with a brass inner nozzle and a rubber dampening pad.

If you're building an AEG for maximum longevity and consistency, the Laylax Black Hop-up Rubber - Extra Soft will be an asset to your operaation. This HOP-up bucking is extra soft, making it ideal for full auto assault rifles, and is extra effective when paired with an OMEGA or OHM HOP-up nub. It offers an airtight design that promotes consistent FPS and HOP so your BBs will reach their destination successfully, time and time again.

Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and out-performed on the battlefield, the Laylax Black Hop-up Rubber - Extra Soft belongs in your Airsoft replica.

Upgrade your AEGs piston head to improve air seal and increase the efficiency of airflow through the cylinder. This piston from FPS Softair has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

Constructed from CNC aluminium Ergal, which has been anodised, the piston head features a smooth precise surface. The piston head has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape.

This is the most advanced version with 6 ventilation holes for higher speed and rate of fire, double O-ring and ball-bearing. This head is designed for version 2 and 3 gearboxes but may fit other types.

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD.

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov.

The Patrol Base Large Tamiya Connector is an essential spare to have if you are the techy type of Airsofter who cannot resist customising their kit, but could also be useful for anyone who participates in RC hobbies. The set includes the connector and the outer plastic shroud, and is available as either a set to mount to your gun (Gun end) or a set to mount to your battery (Battery end).

A programming button designed to give you a bit more control of your GATE MOSFET, which is also compatible with other brands.

If your SMG-5 trigger is a bit worn out or you have a flat trigger inside and you want a more classic SMG-5 look, the CYMA Trigger for SMG-5 AEG is what you need. This trigger is only for SMG-5 AEGs which use a version 2 gearbox and will not fit the version 3 gearbox equipped SMG-5K and SMG-5PDW series. The trigger itself is constructed from alloy and has the curve of the original SMG-5 trigger, making for an appropriately realistic look. Included with the trigger is a trigger return spring, so if you have lost this part you're in luck!

The Bolster Armouries AOE Correction Washer is the perfect easy upgrade for your Airsoft AEG. It fits behind the piston head and ensures your replica has the perfect angle of engagement. This is the angle at which the first tooth of the piston toothing comes into contact with the toothing of the sector gear. If the AOE is incorrectly adjusted, the piston guiding rails and the first piston tooth are subjected to increased wear.

The correct AOE adjustment significantly increases the lifetime of a piston, it can also reduce the chance of your Airsoft platform jamming, which often occurs when the angle of correction is not correct. The FPS will also be more consistent due to a smoother and more precise engagement when firing the AEG.

Treat your Airsoft AEG to the Bolster Armouries AOE Correction Washer and watch as its performance becomes more consistent and the piston survives many more skirmishes.

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui.

If you are having trigger trouble with your Specna Arms AR36 AEG, the solution is here! This unit is a replacement original part for the SA-G series of AR36 AEG rifles and will require disassembly of the gearbox to install, and soldering, as such it is only recommended for experienced techs and advanced users.

An upgrade or replacement air nozzle for AEG M16A1 platform weapons.

Excellent quality air nozzle constructed from a durable polymer to produce a tighter and more consistent air seal for every shot, and has an overall length of 21.66mm.