All Electric Parts

If you want to squeeze a bit more accuracy and FPS out of your AEG, Laylax has just the thing. This 6.03mm Tightbore Inner barrel is part of the Laylax Prometheus range, widely regarded as the best source for AEG upgrade parts in the world. Inner barrels from this same range are known for their rigid stainless steel construction and immaculate internal finish and are what we use in the phenomenal Bolster Armouries AEGs.

This 6.03mm tightbore is designed for AEG rifles, SMGs, and support guns which use the Tokyo Marui AEG style of barrel cut, which is the vast majority on the market, and will provide an accuracy improvement thanks to its finely polished internal surfaces and a slight increase in FPS thanks to the tighter bore improving air seal and the overall efficiency of the system.

A drop in MOSFET Kit designed for Tokyo Marui NGRS Recoil Shock Systems, such as the NGRS M4, and the NGRS SCAR. This variation of the Kit comes with the MOSFET Unit, the USB-Link, and is the Advanced version with unlocked features.

If you are worried about trapping your wiring when inserting a magazine or reinstalling your MCX handguard, Laylax has once again come up with a solution! The Wire Guard for MCX AEG is designed to mount to the gearbox shell and keep your wires well out of the way of any snags or potential damage from inserting magazines or removing/reinstalling the handguard. If you want to get ahead of one of the known problem areas of the MCX and save yourself some hassle down the line this affordable upgrade could save you time and money!

This Motor Pinion Gear is an O-Type design, constructed from Steel and made for Airsoft Electric Guns to replace broken, damaged or worn parts. If Pinion Gear has lost teeth or worn down, it's only a matter of time before it stops working completely; stock up on vital spare parts like the Battleaxe Steel Motor Pinion Gear, today.

The GATE AOE spacer is an ideal and straightforward upgrade for your Airsoft AEG. Positioned behind the piston head, it helps achieve the optimal angle of engagement (AOE). This refers to the angle at which the first tooth of the piston engages with the sector gear's teeth. Incorrect AOE can lead to excessive wear on the piston guide rails and the first tooth of the piston.

Proper AOE adjustment greatly extends the lifespan of the piston and helps prevent jams, which are often caused by incorrect alignment. It also improves FPS consistency by allowing smoother and more accurate gear engagement during each shot. The spacer is compatible with pistons that have a 5 mm centring hole and piston heads with a 5 mm centring spline.

Upgrade your Airsoft AEG with the GATE AOE spacer to enjoy more reliable performance and extended piston durability through countless skirmishes.

A replacement Pinion Gear designed to replace broken, damaged and worn Pinion Gear on Airsoft AEG Motors with Type-D Shaft.

If you're building a gearbox from scratch or you've had a mishap with your anti-reversal latch or ARL spring, the Lonex Anti-Reversal Latch for V2/V3 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, ideal for upgraded AEGs with strengthened gearsets.

This Anti-reversal latch set is intended for version 2 and version 3 AEG gearboxes and is a great spare to have in the toolbox for techy Airsofters. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it!

If you have had a mishap and broken your selector plate, or you want something a bit stronger to reduce the likelihood of failure and reduce resistance at the same time the Laylax Hard Selector Plate is what you need. This selector plate is compatible with M4/AR15 AEGs and is constructed from hardened polymer to reduce flex and improve strength. This is a conventional selector plate designed for standard trigger contacts and will not work with optical MOSFETs without modification.

If your PTS EPM1 mag is worn out, you must have done a lot of shooting! To fix it up, the PTS Syndicate EPM1 Spring Replacement Set is what you need! The set includes the feed spring, follower and associated parts, making it a fine replacement for magazine internals that have quite literally been through the wars and a great option for those who've lost their spring or follower to the carpet monster!

For the Airsofter who wants ultimate range and accuracy from their AEG. This high performance bucking by Prometheus is designed for Marui AEGs and is smooth inside, making it suitable for those with a Flat or R-Hop modification.

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction.

Building a beast of a gearbox? The Gate Protector CNC Aluminium Cylinder head guarantees a fantastic air seal thanks to its double o ring configuration. The Protector cylinder head is constructed from CNC machined aluminium and includes two rubber buffers of differing hardness, one of which can be installed on the rear of the cylinder head to reduce the impact force on the front of the gearbox shell and prolong its life. This cylinder head is best suited for standard builds or high performance DMR style builds and has super tight tolerances making fitting a breeze while reducing friction between parts which can result in premature failure.

If you are building up a DMR AEG you will want one of these inside! The Power CNC Aluminium Hybrid Piston head from Gate combines innovations from the AEG piston head market with those from Sniper rifles to allow the weight of the piston head to be adjusted to help reduce power loss when using heavy BBs (>0.3g). With the Hybrid Piston Head you have the choice; either install the piston head alone for improved air seal, longevity and reduced friction, or if you're building a DMR you can add the included weight pads to increase the weight of the piston, and reduce lost FPS when using BBs weighing over 0.3g. Perfect for a DMR build, but equally great in a standard AEG build, Gate has really broken the mould with this one!

If you are looking for exceptional performance for your AEG, either for a high rate of fire build or a DMR running at higher than normal FPS reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is compatible with any AEG with a version 2 or version 3 gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick. 

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. 

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

If you're searching for an advanced MOSFET for your version 3 gearbox-equipped AEG, the ASTER II Bluetooth® MOSFET for Version 3 Gearbox from Gate Electronics is ideal. A cutting edge advancement over the original Gate ASTER MOSFET, the ASTER II boasts several quality of life improvements, more customisation options than ever before and Bluetooth 5.2 connectivity built-in, allowing you to change settings wirelessly on your smartphone or mobile device.

The ASTER II electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. Other programmable options include adjustable pre-cocking and adjustable active braking; perfect for the techy types to set their primary up to suit practically any build objective.

The ASTER II is compatible with any version 3 gearbox-equipped AEG and can also be used with the Gate PULSAR Single or Dual-Solenoid HPA Engines if you add the ASTER II-specific HPA cable for the appropriate engine type. If you're ready to turn your Airsoft gun into a Space Gun, the Gate ASTER II Bluetooth® MOSFET for Version 3 Gearbox is calling your name!

Turn your AEG into a TITAN with Gate's new flagship electric trigger unit (ETU), the TITAN II Bluetooth for Rear Wired V2 Gearbox with Basic Firmware.

Built-in Bluetooth 5.2 technology gives you direct access to the TITAN's settings on the fly, using AEG telemetry to allow you to use your smartwatch, STATUS and other future devices in the Gate ecosystem of devices.

The innovative gear sensor not only counts each tooth but also as the first in the world determines the direction of a gear's rotation, offering you the most precise of cycle controls in AEGs.

With mind-blowing optical trigger sensor, the TITAN II allows you  to set your hair trigger with ludicrous precision, with a whopping 50 sensitivity levels for the first millimetre of trigger movement.

The TITAN II is equipped with a multifunctional port ready for connecting additional accessories such as bolt-catch, magazine sensor, tracer in hop-up chamber and others.

A drop in MOSFET Kit designed for Version 3 Gearbox, which are typically seen in AK and RPK Variant Rifles.