All External Airsoft Parts & Attachments

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 5cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.

Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

An Aluminium constructed charging handle extension for AK style replicas.

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

Used by the UKSF, this replica suppressor doubles as a tracer unit and attached to your 14mm CCW outer barrel and provides an ultra-realistic muzzle device experience. Featuring a clean, well-weighted alloy design with an aggressive low profile front muzzle.

Used by the UKSF, this replica suppressor doubles as a tracer unit and attached to your 14mm CCW outer barrel and provides an ultra-realistic muzzle device experience. Featuring a clean, well-weighted alloy design with an aggressive low profile front muzzle.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out. 

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

An alloy, ambidextrous replacement mag release for M4/15/16 variant rifles that is ready to install right out of the packet.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! 

This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. 

To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.