- 32rnd Capacity
- Hard rubber gas router
- Compatible with most Mk23s
The Novritsch 32rnd Gen.3 Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.
Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gen.3 Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.
- 22rnd Magazine
- Green Gas Powered
- For UMAREX GLOCK 45
A 22 round Green Gas / Inlet Valve Magazine for the UMAREX Glock 45 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades.
- Easy To Maintain
- 24rnd Capacity
- For GBB F226
A Spare Gas Blowback Magazine for any generation of the WE F226 range.
- Alloy Base Plate
- Full Alloy Design
- For W65U Makarov
A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops.
- Alloy Base Plate
- Full Alloy Design
- For W65U Makarov
A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops.
- Gas Magazine
- 50rnd Capacity
- Alloy Construction
A High Capacity Gas Magazine for WE B92 Airsoft Gas Blowback Pistols.
- Gas Blowback Magazine
- 25rnd Double Stacked
- For F228 / F229 Pistol
A gas blowback Airsoft 6mm BB gun magazine designed for WE Europe's F228 series and F229 series pistols. A perfect spare to increase your trigger time, without stopping to reload.
- For GBB F226
- 24rnd Capacity
- Easy To Maintain
A time with a full alloy outer construction and base this magazine is durable yet lightweight. The feed lips and BB follower are polymer and are replaceable.
- 44rnd Capacity
- Green gas mag for Hi-Capa 5.1 GBB
- Chrome silver version - Shiney!
If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!
Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.
If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!
- 27rnd Capacity
- Alloy construction
- For Cyber Gun Desert Eagle L6 GBB
Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.
- 20 Round Capacity
- Green Gas Powered
- For UMAREX H&K HK417D GBB Rifle
A 20 Rounds Green Gas Magazine for the UMAREX Airsoft HK417D Gas Blowback Rifle.
- 20rnd Magazine
- For UMAREX H&K G3 GBB
- Fully Licensed By Heckler & Koch
A 20 Round Green Gas Magazine for the UMAREX Heckler & Koch Gas Blowback G3A3 Rifle.
- 40rnd Capacity
- Green gas magazine
- For SMG-7/SMG-8
A spare magazine for the Gas Blowback submachine gun; the WE SMG-8, and the WE SMG-A1 (Also known as the New Wave - NP7 or "Small Rice 7").
*Please note that this magazine is not compatible with the Tokyo Marui SMG-7 or Umarex MP7 platforms
- CO2 magazine
- For Umarex M9A3
- Finished in authentic tan
One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!
- Double Stacked
- For P-Virus P226 GBB
- Gas Blowback Magazine
An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol.
- Great Reliability
- CO2 Powered Mag
- 25 Round Magazine
A CO2 magazine designed for the WE EU-Series pistols, allowing you to make the move from Green Gas to CO2. The magazine is robust and gives excellent power for every shot, built from Alloy the magazine comes with a steel screw in base for extra durability.
- 90rnd Capacity
- Internal temperature sticker
- For Tokyo Marui Saiga-12K
Do you find yourself running out of ammo way too often? We have the solution! The Tokyo Marui 90rnd Saiga-12K Long Magazine is exactly what you need to keep on blasting for longer. This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!
The magazine holds a whopping 90 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To insert this magazine, use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.
The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine
- Official ASG CZ P-09 Magazine
- Green Gas Magazine
- 25 Round Capacity
A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.
- For 4.3 Series Pistol
- Large Magazine Base
- 28rnd Double Stacked
An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.
- 20 Round Capacity
- Gas Blowback Magazine
- For WE EU19 / EU23 Pistol
A gas blowback Magazine for the WE Europe EU-Series Pistols EU19, and EU23.
- 15rnd Single Stack
- For P-08 Series Pistol
- Bottom Fill Valve Mag
A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.
- CO2 Powered
- Tough Construction
- For KWC/Cyber Gun
A CO2 powered 21rnd magazine for the KWC/Cyber Gun CO2 powered Desert Eagle.
- 25 Round Capacity
- For H&K UMAREX USP .45
- Fully Licensed By Heckler & Koch
A Green Gas, 25 round magazine for the UMAREX Heckler & Koch USP .45 GBB Pistol.
- 350rnd Capacity
- External winding wheel -Easy to wind
- Compatible with EU series and AAP-01 GBB pistols
If you have the desire to dump 350 rounds in one long burst from your GBB pistol but you don't want to go the HPA route this is your chance! The WE Europe 350rnd Green Gas Drum Magazine is designed for WE's GBB EU series which means it will also work in the Action Army AAP-01.
The magazine is constructed with a hefty alloy gas reservoir with a high density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you go pistols only and you need extra firepower to compete, this will suit you well!
- 350rnd Capacity
- Wheel wound high-cap
- For WE Galaxy EU & AW VX7/9 Precut
If you need more firepower for your WE Galaxy EU series or optics-ready Armorer Works VX7/9, this will do the trick! The Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series boasts a whopping capacity of 350 BBs, loaded through the fill window on the left side of the mag body. Simply slide the door open and pour your BBs in, just like an AEG high-cap.
The winding wheel is on the front, easily accessed when wearing gloves and very fast to wind; a significant step up from comparable winding wheels and "flash mag" style setups which can be a hassle to use under pressure. Once your BBs are loaded, wind the wheel until the noise changes and you're ready to give 'em hell!
The fill valve is located on the baseplate, requiring the mag to be inverted to fill with gas. Boasting a gas reservoir just as massive as its BB capacity, this drum mag will handle rapid-fire far more effectively than standard or even extended mags, ideal for those who run their pistol as a primary. Compatibility-wise, this mag is only for the WE Galaxy EU series, WE EU-series MOS and Armorer Works VX7/9 optics-ready versions and won't work with standard EU series pistols.
With 350 BBs on tap with plenty of gas to get them on target, the Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series is the perfect addition for any pistol user that hates reloading and loves dumping rounds downrange!
- CO2 Powered
- 25rnd Capacity
- Alloy Construction
A CO2 magazine in that holds up to 25rnds at a time. CO2 powered the 12g bulb is stored in the bottom of the magazine with an easy to release base plate and easy access CO2 base plate.
- Lightweight aluminium magazine
- For KRYTAC SilencerCo Maxim 9 GBB Pistol
- Also compatible with UMAREX Glock 17 GBB
If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!
Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.
- 25rnd Capacity
- Compatible with most EU-series
- Preinstalled PTS Shockplate-G
If you have a premium EU-style pistol such as the PTS Syndicate ZEV OZ9, you need this magazine! The PTS Syndicate SAM 25rnd GBB Magazine is as good as it gets when it comes to Airsoft pistol magazines. With a plethora of quality upgrades, this magazine is worth every penny.
It's compatible with most EU-style pistols, including Tokyo Marui and any clone of that model, making it very versatile if you enjoy that pistol style. The SAM magazine is designed for performance and durability, making it perfect for all skirmishers. Pick yours up today and dominate the battlefield!
- 24rnd Capacity
- Full Metal Construction
- Replacement Magazine
These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.
- 22rnd Capacity
- CO2 Magazine
- For ASG CZ P-10C GBB
If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!
While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!
The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go!
About Our Airsoft Magazines
Mag up and shop low, mid and high capacity magazines for all airsoft guns.
Polymer, full metal, low to high capacity we have you covered for every kind of airsoft gun from pistol magazines to SMG magazines. Remember, you can never have enough magazines! Plus, take advantage of our bulk deals and save money.
We have every magazine from your standard AEG to SYSTEMA PTW and MARUI Recoil Shock series that stop your AEG or PTW from firing once the magazine is empty. We also stock a range of flash magazines that are wound up using a pull cord system. This allows for them to be wound faster and easier, especially whilst wearing gloves. And when you need to discard the mag mid-battle? Shop our magazine pouches or dump pouches.