Airsoft Magazines

If you are rocking a modernised AK AEG these magazines will suit it well! The CYMA 140rnd "Waffle" Mid-Cap Magazine for AK AEG is patterned after real steel Bulgarian AK-47 magazines also sold in the US under the brand "Circle 10". The magazine has waffle texture on the outside to promote positive grip and is constructed from rigid high density polymer, meaning an accidental drop doesn't result in scratches! If you need AK mags for a PMC or modern mercenary loadout, these are perfect!

Are you looking for some cheap mid-caps to feed your Airsoft AEG? Well, you're in luck! The Battleaxe 200rnd Mid-Cap Steel Magazine For M4/AR-15 AEGs is an affordable solution that allows you to skirmish for longer without needing to refill magazines constantly. Its mid-cap design means that all the BBs are fed without the need for winding, plus, there is no "battle rattle".

The steel outer shell of this magazine ensures that it is strong enough to survive the rigours of a rough battlefield, keeping the polymer internals and steel feed spring safe, so you can be sure that your magazine will always be reliable. The magazine shape is based on the STANAG design, the iconic European design and features grooves on its surface for better gripping and faster reloads, in all weather conditions.

Keep your Airsoft rifles well fed with the affordable Battleaxe 200rnd Mid-Cap Steel Magazine For M4/AR-15 AEGs, and you'll be sure to outgun all those who oppose you on the battlefield.

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

This Magazine is designed for Airsoft M4/AR Platform Electric Guns, and features a gorgeous, modern design with Mock Bullet Window and Thick Rubber Baseplate. It holds a total of 150rnds and is filled from the top using a Speedloader. If you need an ultra modern Magazine to finish off your Custom M4 build, then the Battleaxe 150rnd Mid-Cap Polymer Magazine for AR-15/M4 is the ideal choice.

A Gas Blowback Magazine designed for the WE Europe EU-Series Pistol Range, designed to allow the user to carry more rounds than standard Airsoft Pistols, giving the user a tactical edge in the field. 

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

If you are a GBBR user you will be well aware that your magazines hold a mere 6th of what the average AEG high-cap holds, so spare magazines are a must unless you are pretty speedy with a speedloader!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

A replacement, spare or 'special treat' magazine for your gas-powered EU Series pistol, which holds a frightening 50rnds to keep your sidearm blazing throughout the day.

Are you the type of player that seeks every advantage to keep the enemy team subdued whilst skirmishing? Having fire superiority is one of the best ways to make the most of an SMG and an aggressive play style. The NUPROL 1200rnd Electric drum magazine is a superb addition to any SMG-5 loadout and can be an asset in gaining the volume of fire advantage when skirmishing, and can turn the SMG-5 into a highly mobile and manoeuvrable support weapon, able to keep pace with the assaulter and provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the SMG-5 styling, especially if it is railed up!

A multipack of magazine for the ASG Scorpion Evo. Built from tough Polymer these magazines are mid-capacity, meaning BBs can be loaded from the top using a speed loader and then require no winding. 

A magazine designed for use in the WE Europe's EU-Series of pistols. Each magazine is of a full metal construction and holds up to 25 rounds. 

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility.

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

If you're running your VMP-1 SMG as a backup or cutting about with the beastly VMP-2D or MD, the VORSK 20rnd Short Gas Magazine for VMP GBB Series is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol or need compact mags to suit your VMP-2D or VMP-2MD DMR, these are what you need!

A variable capacity magazine for the Arcturus PP-19-01, capable of holding your choice of 30 and 95 rounds. The mag is filled using a speed loader at the fill port at the top and if you want to adjust between capacities this is accomplished by pressing the lock button at the bottom and sliding the bottom plate off. Then after removing the interior from the outer casing there is a switch on the side and after pushing inwards and moving either left or right that will alternate between 30 and 95rnd capacity. This is the perfect purchase for anyone who owns an Arcturus brand PP-19 and wants a mag that can vary between playstyles depending on the skirmish at hand.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

The Novritsch 100rnd Magazine for P90/SSR90 Gen.2 AEGs is more transparent than other magazines allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! Novritsch has also slightly tweaked this magazine design so it fits better into P90/SSR90 Gen.2 AEGs, giving you smoother reloads even in the heat of the moment, when the adrenaline is pumping! It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

If you have dreams of building an old school SMG-5 but you can't find the right high-cap mags, get them here while they last! The CYMA 200rnd Old School Straight High-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are high-caps for AEGs, meaning extra capacity, less time spent reloading and more opportunities to get kills before refilling. These mags should be compatible with practically any SMG-5 AEG platform out there and also the CM.106, CYMA's AR-9 platform. The mags can be loaded through the fill window at the top of the magazine body by opening the window and pouring BBs in straight from the bottle. With your BBs loaded, all you need to do is to wind the winding wheel on the bottom until it becomes firm, then get shooting!

Whether you are going old school with your SMG-5 build or not, straight mags give this iconic SMG a whole new look and can be a great way to make your SMG-5 platform AEG stand out!

A 25 Round CO2 Powered Magazine designed for the GLOCK 17 Gen4 by UMAREX.

If you want more ammo on your AK but drum mags aren't your thing, this mag very well might be! The CYMA 1100rnd Electric High-Cap Dual Magazine for AK47/74 AEG is styled after a pair of real steel 7.62 x 39mm magazines clamped together with a mag coupler, complete with detailed dummy cartridges for a more realistic look. This magazine should be compatible with any AK47/74 AEG rifle but is ideal for 7.62 x 39mm chambered AK replicas such as the original AK-47, AKM and AK-103, to name but a few!

This magazine holds an incredible 1100 BBs and can be wound up in 3 different ways; using the winding button, the manual winding wheel just like any other high-cap, or via the sound control function which will wind the magazine as it detects you shooting. 

Filling the mag can be done through the fill window on the top of the mag body and the manual winding wheel is on the baseplate, as it is in most high-cap mags. The button which controls the auto-winding/sound control function can be found on the left side of the dummy magazine, and if you want to wind the mag using the winding wheel make sure you have this switch in the central (off) position. To power the magazine you will need 3 x AAA cells (not included) but if you don't have any lying about the night before the skirmish you can always use the winding wheel and stay in the fight with a whopping 1100 rounds at your disposal!

If you are sniping you probably don't need that much extra ammo, but there is nothing worse than hiding on the deck fumbling with your speed loader as the enemy close in, trust us! The Double Eagle M52 magazine is constructed from polymer and holds 27 rounds, giving you 27 more chances to get that kill! These magazines are nice and compact, and easy to store inside pistol magazine pouches or a utility pouch. This magazine looks like a VSR design but we have not yet been able to confirm compatibility.

A pack of 5 replacement shells for the DBoys Shell Ejecting Kar98. The shells themselves are constructed from Alloy and are shiney silver.