All Two-Tone Airsoft Guns

If you're after a sidearm with attitude or a challenging primary for CQB, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off is the game changer you need. This sawn-off lever action shotgun replica works just like the real thing, feeding from realistic shells which eject when the action is worked. Being the shortest variant of the M1887, this beast would be a fantastic sidearm for close encounters, offering a 3+1 shell capacity, a fast-to-work action and a compact and lightweight form.

The Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate shots. Whether you're working on a post-apocalypse wastelands-style loadout, a Wild West-style setup or you simply appreciate a novel Airsoft gun with an exciting experience, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off is sure to put a smile on your face!

It's so hard to find a unique looking M4/AR-15 AEG these days, thankfully companies such as APS have not lost their creative spark! The Ghost Patrol Phantom M4/AR-15 AEG is a CQBR length rifle with an M-LOK handguard, sound amplifying muzzle device, a well-built gearbox with a quick change spring system and an electronic trigger unit pre-installed housed inside a redesigned receiver with some superb modern touches, both stylistic and functional. The Phantom also sports ambidextrous controls, and programmable fire selector modes thanks to the APS SDU 2.0 MOSFET which allows for burst modes of varying duration to be set.

If you're a fast moving CQB specialist or fancy running a shotgun as a sidearm, the Tokyo Marui M870 Breacher Gas Airsoft Shotgun has your name on it! A close replica of the real steel M870 Breacher configuration issued to the US Army, this full metal pump-action shotgun is a foe to fear in CQB, offering 3 or 6 BBs per shot and a very fast action; far easier to cock than comparable spring shotguns, especially at speed!

Inside, the TM M870 Breacher is equipped with a fixed HOP-up optimised for 0.25g BBs. This may limit your range but remember, this is a shotgun! Its best use is up close and personal, taking pure advantage of its realistic shotgun-style spread to deal with sudden threats and moving targets. The Breacher is powered by standard green gas stored in a removable gas tank, keeping the overall setup compact and allowing you to carry multiple tanks in standard pistol mag pouches for long-duration operations. If you need something to keep handy for close encounters, you can't ask for better than the Tokyo Marui M870 Breacher Gas Airsoft Shotgun!

If you're in search of a URGI-style AR to complete your loadout, the Specna Arms SA-A34 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is a fine choice. Boasting the top-notch build quality Specna's ONE™ series has become known for, this is the updated version, fitted with the superb EShooter Kestrel Basic ETU/MOSFET. 

The Kestrel Basic offers programmable fire modes including 3 round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. The result is a remarkably snappy trigger when pre-cocking is set, the perfect feature for someone who needs fire supremacy in CQB to get the job done! Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The SA-A34 ONE™ is closely patterned after the real steel MK16 URGI, an enhanced upper receiver designed for US SOCOM and currently serving with US Special Forces of various branches. Equipped with an SMR-style M-LOK handguard, ambidextrous charging handle and SF-style four-prong flash hider, the SA-A34 is just waiting for your choice of accessories to complete the look!

If you're looking for a gas pump-action shotgun with a menacing aura, the EMG Strike Industries M870 VOA Custom Gas Shotgun is what you need. This full metal M870 shotgun has had a full external makeover, including a flawlessly replicated Strike Industries VOA M-LOK handguard, "Strike" railed barrel camp and 20mm Picatinny receiver rail with a built-in "side saddle" which holds 6 shotgun shell magazines. 

Internally, this beast is based around generation 2 of Golden Eagle's Type 870 series, boasting improved quality rubber seals, a built-in gas reservoir and compatibility with common tri-shot shotgun shell magazines. The system is based on the Tokyo Marui M870 and is capable of shooting either 3 or 6 BBs per trigger pull, making it a serious foe to contend with in a CQB scenario. Most upgrades and enhancements for the TM system should fit this monster, including HPA conversions, drum mags and other naughty accessories. 

Those searching for shotgun functionality with a more exciting external aesthetic, the EMG Strike Industries M870 VOA Custom Gas Shotgun has your name on it! Every bit as intimidating as plain Jane 870s but with uniquely violent styling, the EMG M870 VOA Custom looks straight-outa space and we love it!

If you like the idea of running an LMG but want something light and agile, the Golden Eagle 6670 MCR LMG AEG is what you need. This full metal support weapon is based on the real steel FightLite MCR, an M4/AR-15-based light machinegun which makes the most of the M4's ergonomics with the firepower of a true LMG.

Like the real MCR, the Golden Eagle example boasts a stylish fluted outer barrel which also serves to reduce weight, a mock belt fed upper with mock rounds and link included and an aluminium KeyMod handguard, ready for your mission essential accessories.

Unlike the M249 platform and other dedicated LMGs, the MCR still has its semi-automatic mode, meaning you can follow your team inside and duke it out in semi-only areas. The lightweight build of the MCR really leans into this, letting you cut about with something barely heavier than a full metal M4 but with the firepower of the included 2500-round auto-winding box mag and LMG pre-requisite belt-fed looks. If an LMG is your next step in expanding your arsenal, the MCR is a fantastic choice for those looking for a lesser-seen yet highly effective support weapon!

What better way to show your fandom of the awesome John Wick movie series than collecting replicas of all the pistols and rifles wielded by our hero? With the advent of the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG, that goal has become closer than it ever has been! The EMG JW2 boasts full metal construction, a flawless finish and absolutely incredible performance, as we might expect from a replica manufactured by CYMA Platinium with official licencing from TTI itself.

On the outside, we have a 14.5-inch smooth profile outer barrel with a TTI muzzle brake, a CNC machined aluminium KeyMod rail system, the uniquely designed Taran Tactical AR-15 receiver and flawless engraved and laser engraved TTI markings across the design, perfectly replicating the rifle used by the boogie man in John Wick: Chapter 2.

The internal parts are equally impressive; the JW2 boasts a 6.03mm tightbore inner barrel, alloy rotary HOP-up unit, extensively upgraded CYMA Platinium high speed E-Edition internals, a high speed motor and the CYMA Platinum MOSFET to keep everything in check. If you want to bury the other team like JW does to all the goons in the film, the EMG JW2 should give you your best chance!

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. This modernised AK-105 is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery. This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. Inside the V3 gearbox, it gets even better!

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-105 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

If you held off on the original SLR AK-105 from CYMA, the EShooter Kestrel Basic ETU version will make you glad you waited! Retaining all the best bits of the original but with advanced functionality added, the CYMA Platinum SLR Airsoft Works AK-105 AEG; Kestrel Basic ETU is a real killer on the field!

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

If you've been holding your breath waiting for KRYTAC's MK3 line to drop, you can breathe a sigh of relief! The KRYTAC EMG BARRETT REC7 MK3 Carbine AEG is the latest REC7 platform release, maintaining the incredible external build quality which made them the base platform for Bolster Armouries incredible ONYX with newly refined internals to squeeze even more performance from KRYTAC's proven components!

*Note that this platform is not provided with the optic shown in the example images

If you like the Cold War AK aesthetic, you'll love the S&T AKS-74N Sports Line! Patterned after the real steel AKS-74N, the folding stock AK-74 issued to paratroopers and mechanised infantry with a Russian AK side optics rail, the S&T AKS-74N is constructed primarily from high-density polymer with alloy and steel parts, keeping weight low and agility high.

Inside, we are treated to a 6.02mm tightbore inner barrel, quick change spring system and 18:1 steel gears running on 8mm slide bearing bushings, giving you a head start over other cost-effective AEGs when it comes to internals and performance. Whether you are working on a Soviet-Afghan War loadout or you want a lightweight AK for your rebel/OPFOR kit, the S&T AKS-74N will keep you light on your feet and get the job done down range!

This Gas Blowback Airsoft Pistol is a replica of a real-world Pistol which is now in its 5th Generation. This replica serves to update the platform with highly requested features to improve the ergonomics and performance of the platform, which results in the trusty and reliable EU19 Gen.5.

If you like AKs but don't like their weight, the S&T AK-74N Sports Line AEG is the AK for you! This AK-74N replica is constructed from high-density polymer with choice alloy and steel parts to add strength where needed. This means, despite being an AK replica this beast tips the scales at a mere 2.3kg, giving it agile handling ideal for aggressive skirmishers or younger players with less physical strength.

Inside, we are treated to some thoughtful pre-upgraded parts, even in this cost-effective"Sports Line" AEG. The inner barrel is a 6.02mm tightbore example, offering improved accuracy and a slight raise in FPS from air seal improvements. The gearbox is version 3, with an alloy shell and steel 18:1 ratio gears running on 8mm steel slide bearings, meaning a smooth gearbox report with compatibility with common upgrade parts for those who want more. If you like the idea of a featherweight AK and are into the Cold War aesthetic, this is the AK to go for!

A highly ergonomic pistol for anyone with any hand size. Full metal slide and mechanical parts allows for a crisp semi action shot.

A hefty bolt action spring powered sniper rifle with a sleek, modern sporting aesthetic, a fluted barrel, folding stock for transport and a gorgeous KeyMod/20mm rail system that sets this apart from other long rifles.

Looking for something a bit different? This certainly is. The S&T ST870 shotgun is full metal with real wood furniture and it shoots nice and hot, it would make an incredible competition shotgun, with excellent accuracy despite the lack of any form of sights! If you're good enough, your primary becomes an extension of your body, and sights become merely a hindrance...

If you are looking to try your hand at sniping, but want something which matches the modern, modular aesthetic of your primary AEG, the M66 will fit the bill! This spring powered bolt action sniper rifle uses the impressive Tokyo Marui M40 internal system, combined with seriously mould-breaking features like its folding adjustable stock, adjustable pistol grip, QD sling points across the entire rifle, and aggressively styled 2-port muzzle brake. The icing on the cake? This rifle offers a convertible bolt handle straight from the factory, allowing the handle to be installed on either side of the rifle for both left and right-handed use.

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in.

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction.

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!

If you're after a sidearm with attitude or a challenging primary for CQB, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off, Standard Lever will spice things up a notch! This sawn-off lever action shotgun replica works just like the real thing, feeding from realistic shells which eject when the action is worked. Being the shortest variant of the M1887, this beast would be a fantastic sidearm for close encounters, offering a 3+1 shell capacity, a fast-to-work action and a compact and lightweight form.

The Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate shots. This, the "Standard Lever" version sports the standard-sized Winchester style action lever, as opposed to the "Mare's Leg" style enlarged lever. 

 Whether you're working on a post-apocalypse wastelands-style loadout, a Wild West-style setup or you simply appreciate a novel Airsoft gun with an exciting experience, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off, Standard Lever lets you depart from the usual AEG dominated experience and enjoy the realism of skirmishing with a shell ejector!

Authentic and gorgeous, this is the first thought you should have when looking at this real wood A&K Dragunov SVD Sniper Rifle. A replica of the renowned Russian marksman rifle, this AEG looks seriously badass! This version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first produced for the Russian military in 1963. This Dragunov boasts full metal construction with some steel parts as well, giving it a reasonably realistic weight without making it a pain to carry around all day!

It features a custom gearbox and a 6.03mm diameter barrel. This, paired with the Dragunov's neodymium motor and 590mm inner barrel, means it can pack quite a punch and a superior range. The A&K Dragunov would be an excellent platform for a DMR or sniper rifle loadout, just like its real-world utilisation. If you are looking for a long-range platform that has an authentic and iconic look, with real wood and steel, then the A&K Dragunov SVD Sniper Rifle should be in your sights!

If you're into the "Honey Badger" look, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU will definitely please you! Boasting full metal construction and an integral suppressor surrounded by a CNC aluminium M-LOK handguard, the CM.097D is rocking all the superb pre-upgraded components CYMA's Platinum series is known for with a more compact form and stealthy styling, ideal for CQB or fast moving, clandestine skirmishers!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

With top tier pre-upgraded internals and solid externals with a cutting edge aesthetic, the CM.097D is a beast in all aspects and its compact size lends itself well to fast moving, aggressive playstyles and close quarters environments. If you need a modern, full metal AR which will never need upgrading, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU is the one to go for!

If you're working on an L119A2 build for your SAS/UKSF loadout, why bother? The Rossi L119A2 Neptune SAS 10.5" AEG with MOSFET is a fantastic replica of the real steel L119A2 boasting full metal construction, a programmable MOSFET/ETU system and pre-upgraded internals, all assembled and ready to rock with no compatibility worries and no technical headaches!

Externally, the Rossi L119A2 is a very close match for the real thing, with the only compromise being its non-monolithic receiver design. The real thing has a monolithic upper, but the only available Airsoft replicas have a four-figure price tag and come as a kit, requiring a lot of technical expertise and other parts to complete the build. 

With the Rossi L119A2, you are treated to some impressive stuff on the inside as a bonus. The version 2 gearbox shell is reinforced and equipped with 16:1 high-speed CNC steel gears, a ball bearing equipped quick change spring guide, a CNC aluminium nozzle, a polymer piston with a full steel tooth rack and a ball bearing piston head, resulting in top-notch reliability, improved rate of fire and easy spring changes for power tuning. The pre-installed MOSFET makes thing even sweeter, offering a wealth of programmable fire mode options, adjustable pre-cocking and trigger sensitivity with active braking to top it off. 

If you want the Obiwan Nairobi look for your next skirmish, the Rossi L119A2 Neptune SAS 10.5" AEG with MOSFET is the primary you need!

Featuring all of Tokyo Marui’s usual high-quality standards of construction and design, this is a gas powered non-blowback replica of Kel-Tec’s futuristic looking bullpup KSG shotgun, as seen in many videogames and movies.

If you are into the big boy style of 7.62x51, the EC-202 should suit you! This full metal AEG is based on a well known platform we all love the look of, and is packing more than its fair share of pre-upgraded internals so the look matches the performance. On the outside, we are treated to 20mm Picatinny rails wherever they are needed, a low-profile snag reducing stock with 6 positions of adjustment and a full complement of ambidextrous controls, making this a great platform for left or right-handed shooters. 

Internally, the EC-202 is kitted out with a 6.04mm tightbore inner barrel, rotary HOP-up unit, steel gears, a reinforced V2 long gearbox and an In-Line MOSFET to keep the electrical efficiency high for a fast trigger response and above average rate of fire. If you have plenty of normal assault rifles and your collection is lacking 7.62x51mm replicas, the EC-202 would be an asset to your arsenal!

An amazingly solid AR platform replica from CYMA, in a series of rifles which could possibly be the greatest AEGs they have ever released. Not only is it almost entirely made from Aluminium externally, it features a MOSFET, Microswitch Trigger, Quick Change Spring and many more internal bonuses.

If you're into the latest and greatest Russian rifles, your collection is not complete without the ARCTURUS AK-12 AEG Rifle w/AK-19 Stock; Optical MOSFET! This full metal AK-12 AEG replicates the latest version of the AK-12, fitted with the AK-19 type stock and pistol grip for considerable enhancements to ergonomics.

As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. Make no mistake, this is a BEAST when it comes to external build, with fantastic quality parts used throughout with the weighty presence in the hands a proper AK replica deserves.

On the inside, things get even better! This may not be quite as well kitted out as the Perun Enhanced AK-12 but it is bristling with fantastic quality internal parts with a new ARCTURUS programmable MOSFET. Also inside is an 18:1 ratio CNC steel gearset, 8mm ball bearing bushings and a 23TPA high torque motor to provide a stunning trigger response in both semi-auto and the AK-12's two-round burst mode.

To top it off, a 6.01mm Tightbore inner barrel pairs perfectly with the ARCTURUS rotary AK HOP-up allowing the AK-12 to put some serious hurt down on the enemy team with fantastic accuracy and consistency. Whether you want to walk on the wild side with a change from your usual AR platform or you've got an AK collection and want to add something at the cutting edge, the ARCTURUS AK-12 AEG Rifle w/AK-19 Stock; Optical MOSFET will make you happy!

The original Novritsch sniper rifle, the SSG24 has been around since 2017 and its success is what brought us the wonderful selection of Novritsch platforms that we have available today. This is the last chance for sniper fans to get their hands on the sniper rifle that started it all, with only limited stock available, get your hands on a piece of history before its too late!

This SSG24 is an M24 platform decked out to the nines, taking the original shell but installing state-of-the-art internal parts, meaning this rifle needs no further tuning or modifications, it's already a beast. It is a no-compromise rework of the OG sniper rifle that we all fell in love with Novritsch because of.

Sporting a 6.01 precision tightbore barrel for pinpoint accuracy and a satisfying pop with every shot, this sniper is crafted to perfection, with a suave alloy fluted outer barrel and superbly textured lightweight glass fibre reinforced polymer body, finished with a comfortable rubberised butt plate for a sniper that shoots and handles like an absolute dream.

If you're committed to the AK platform but need something which can go toe-to-toe with modern AR-15s, the CYMA CM.113 AKM Zco Custom AEG; Kestrel Basic ETU is exactly that! Boasting the solid alloy and steel build CYMA AKs are known for and bristling with ultra-modern Zco-style parts, this beast is also fully upgraded on the inside, equipped with CYMA's high-speed E-Edition internals making it ready for 11.1V LiPo batteries with a rate of fire that is hard to beat!

Inside, you'll find 13:1 high speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. AKs with programmable triggers are a bit of a rarity; it's great to see CYMA keeping the AK platform competitive with modern ARs!

Whether you're working on a modern Russian Armed Forces loadout, a PMC kit or simply love the unashamedly aggressive styling of Zco external parts, the CYMA CM.113 AKM Zco Custom AEG; Kestrel Basic ETU will put a big smile on your face!

If you want to ensure victory, you need this. The WELL PRO WE23-X Rotary Minigun AEG is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun will dominate the field, with an incredible fire rate on an 11.1V LiPo battery and a giant 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the classic "Chainsaw" Minigun Terminator life, the WELL PRO WE23-X Rotary Minigun AEG is exactly what you need!

If you're in search of a modernised Krinkov replica which is as much of a killer in-game as it is in looks, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG has your name on it! Based around the already impressive CM.113B Zco Custom, this beast has been refined by the talented techs of Bolster Armouries, furnished with some choice internal upgrades and tuned to get the absolute best out of the stock internal parts.

This new generation of Tuned AKS-74U is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the Kestrel Basic ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. Amongst its many advantages over the Kestrel Basic, you can add the Gate Blu-link to program the ASTER™ with its wealth of customisation options on your phone using Bluetooth!

The HOP-up has been enhanced with a 4UANTUM Friction Pro High-Performance Hop Up Bucking to extend the range out to 60 meters and beyond and to bring the trigger into line with modern AR AEGs, the Bolster Armouries AK Trigger Spacer has been fitted, shortening trigger travel to a hair for an incredible response rate in semi-auto. The team has fitted theGate Power CNC Aluminium Hybrid Piston Head  to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.113B, perfect for high rate of fire fiends!

While the original CM.113B is a very impressive shooter, the Bolster Boys have ushered forth its true potential in the Bolster Tuned version. If you're ready to dominate your next skirmish with a pre-upgraded piece which hits out to 60 meters with a spectacular rate of fire of 26 rounds per second, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG is ready for you!