All Two-Tone Airsoft Guns

If you are looking for a pump action shotgun to lay down the law in CQB this is one of our favourites! The CM.360M M3 Super 90 from CYMA is a spring-powered pump action shotgun which uses the Tokyo Marui Tri-shot system, meaning with each trigger pull you get 3 BBs headed downrange from 3 separate inner barrels, improving hit probability by providing a shotgun-like spread pattern.

We have seen Tri-shot shotguns before, and even M3 Super 90 style ones, so what makes this so special? Well, it is full metal, giving it a solid feel in the hands and a decent but not over-the-top weight, and CYMA has added a few frills to this ancient TM design to add extra realism for those that seek it, most notably the moving mock bolt carrier and charging handle, which has been omitted from Airsoft M3 Super 90 shotguns until now. If you have a taste for realism and you need a spring tri-shot to expand your arsenal this would be a great pick!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

If you move quickly with your sidearm out and want to look good while doing it, the VORSK EU18 Gold Match Vented Slide is what you're looking for. This EU series GBB pistol boasts a full complement of external upgrades in the form of a weight-reduced slide, spiral fluted outer barrel, raised light-enhancing iron sights and a flared magazine well. This combination gives the Gold Match Vented Slide a look all of its own, matching high end real steel race guns with its out-of-the-box customised look.

On the inside, VORSK has even treated the EU18 Gold Match Vented Slide with a 6.03mm tightbore inner barrel, giving it one more advantage over rivals in its price range. For a full metal GBB with a threaded barrel, thread adapter, customised looks and optics-ready slide we are genuinely surprised with how affordable the EU18 Gold Match Vented Slide is. It's not made of real gold, but how could it be for this price?

A fully automatic gas blowback pistol (GBB / GBBp) based on the Generation 3 (Gen.3) EU-Series Pistol, which has both single shot and full auto capabilities.

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

If you love an interesting AK platform, the Double Bell MD.65 AIMS AK47/74 AEG should get you going! This full metal AK AEG platform is patterned after the real steel MD.65 AIMS, a licence-built version of the AKM made in Romania for the Army of the Socialist Republic of Romania. As with many full metal AK platforms, a large part of the external build takes the form of stamped steel, giving you the appropriate weight and heft for an authentic replica.

What makes this AK really interesting is its apparent favour by Western Private Military Contractors during the Global War on Terror era, being seen in the hands of British, American, Australian and many other nationalities carrying out close protection duties. This was due in part due to its affordability and local ammo availability but also its super simple yet effective skeleton folding stock, making it the fastest full-size AK platform to bring from stashed in the footwell to engaging the enemy. Also present on the Double Bell build is the iconic Romanian "Dong" handguard, constructed from real wood to complete the AIMS silhouette. If you seek an AK which sidesteps the default AK look, the Double Bell MD.65 AIMS AK47/74 AEG is exactly that!

An Airsoft 6mm BB Gun, designed in a bullpup configuration, based off the Austrian Steyr AUG. The gun features an Alloy Front end, and Sight with Polymer Body and Foregrip.

If you are looking for a serious speed demon of an AEG, the WELL PRO WE06 PPK-20 Compact SMG AEG - Advanced Version is without equal in its price range. Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype.

On the inside, the WE06 Advanced Version is absolutely insane. Featuring 9:1 ratio high-speed steel gears with a dual sector gear, a programmable optical MOSFET and a 20K RPM high-speed Neodymium magnet motor, this beast kicks out an insane 25 rounds per second with an 11.1V battery! Not content with building an affordable SMG with minigun-like speed, WELL PRO saw fit to install a 6.02mm tightbore inner barrel to improve accuracy and FPS, meaning this lightweight, compact platform can still upset the enemy at range. If you like cutting edge modern SMGs with a unique look and a positively incredible rate of fire, this is what you need!

If your collection is full of short, lightweight CQB AEGs and you have been feeling the draw towards a big, long rifle for some outdoor BB slinging, we have just what you have been looking for! The JG1404 M14 EBR is a close reproduction of the M14 Enhanced Battle Rifle, issued to US Army and Special Forces troops during the Iraq and Afghanistan conflicts. This rifle is a big boy, tipping the scales at 5.4kg with a lengthy 500mm inner barrel and the impressive M14 "V-HOP" system copied from the superb Tokyo Marui M14, giving this platform excellent potential to become a DMR rifle!

If long guns are your thing, you'll love this one! The Golden Eagle E6902M M-417 DMR Long AEG is based on the "Marksman" configuration of a well-known rifle we all recognise, boasting full metal construction, a pre-installed MOSFET and a tightbore inner barrel. The "Marksman" configuration has a 16-inch outer barrel and 13-inch handguard, giving you plenty of barrel length for maximum accuracy and extra rail space for a bipod along with your usual mission essential equipment.

On the inside, the E6902M is based around a version 2.5/version 2 long gearbox with enlarged cylinder group parts to provide greater air volume for improved performance with long inner barrels. The cylinder group parts are all version 2.5 spec, but the 18:1 steel gears are TM V2/3 compatible, meaning aftermarket high torque or high speed gears are well within reach for the upgrade fiends. If you have too many short platforms and need a reminder that size matters, the E6902M should do it!

If you are looking for an MK18, but you're not interested in keeping to the Milsim bland basic style, then the Specna Arms SA-A03 ONE™ MK18 Red Edition; Kestrel Basic ETU is certainly worth your time. This MK18 is fitted with some stylish red receiver parts, such as the mag release, charging handle and sling plate. The full metal externals give this platform a realistic weight and distribution as well as making it strong and able to withstand even the roughest of skirmishes.

Inside the Specna Arms SA-A03 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you're a fan of the real steel firearm scene and love tactical platforms, you must be well aware of the Noveske N4! This Airsoft replica boasts full metal construction and a plethora of pre-upgraded parts from CYMA Platinum, the N4 hits the enemy team where it hurts, with an astonishing trigger response and rate of fire thanks to its E-Edition high-speed internals and MOSFET combination.

To get your rounds out there accurately and consistently, a 6.03mm tightbore inner barrel is installed, coupled with an alloy rotary HOP-up unit for impressive long-range performance, especially for such a compact platform. This 10.5" rifle, is the perfect length for any Airsoft scenario with a performance that can challenge anything else on the skirmish site.

Being an EMG-licenced replica, the N4 Shorty is adorned with flawlessly engraved and laser-engraved Noveske trademarks, making it genuinely hard to tell apart from the real thing. If you want one of the most realistic-looking platforms available on the market, you don't want to miss the EMG Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle; Kestrel Basic ETU!

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

If you're looking for a new CQB primary at the cutting edge of real steel rifle design, the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU should be right up your street! Based on the real steel DDM4 PDW, this compact M4/AR-15 platform boasts full metal construction, official licencing from Daniel Defense via EMG and CYMA's Platinum E-Edition internals, making it a world beater in every way!

Inside, you'll find a reinforced V2 gearbox equipped with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges despite the short overall length of the DDM4 PDW setup!

Improving on the previous DDM4 PDW AEG, this version is equipped with the EShooter Kestrel Basic ETU, offering programmable fire modes including 3-round burst, binary trigger and 6 levels of adjustable pre-cocking. This is a major improvement over the Zeus MOSFET of the original, not only enhancing reliability in the long term but giving you more exciting options and the ability to crank semi-auto response speed up to near GBBR levels!

Both internally and externally, the DDM4 PDW is at the top tier of Airsoft platforms, ideal for CQB players or aggressive playstyles outdoors. If you love licenced trademarks, a high quality metal build and plenty of attachment and customisation options in a compact, menacing form, you'll love the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU!

If you're looking for a new CQB primary at the cutting edge of real steel rifle design, the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU should be right up your street! Based on the real steel DDM4 PDW, this compact M4/AR-15 platform boasts full metal construction, official licencing from Daniel Defense via EMG and CYMA's Platinum E-Edition internals, making it a world beater in every way!

Inside, you'll find a reinforced V2 gearbox equipped with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges despite the short overall length of the DDM4 PDW setup!

Improving on the previous DDM4 PDW AEG, this version is equipped with the EShooter Kestrel Basic ETU, offering programmable fire modes including 3-round burst, binary trigger and 6 levels of adjustable pre-cocking. This is a major improvement over the Zeus MOSFET of the original, not only enhancing reliability in the long term but giving you more exciting options and the ability to crank semi-auto response speed up to near GBBR levels!

Both internally and externally, the DDM4 PDW is at the top tier of Airsoft platforms, ideal for CQB players or aggressive playstyles outdoors. If you love licenced trademarks, a high quality metal build and plenty of attachment and customisation options in a compact, menacing form, you'll love the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU!

If you're looking for a new CQB primary at the cutting edge of real steel rifle design, the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU should be right up your street! Based on the real steel DDM4 PDW, this compact M4/AR-15 platform boasts full metal construction, official licencing from Daniel Defense via EMG and CYMA's Platinum E-Edition internals, making it a world beater in every way!

Inside, you'll find a reinforced V2 gearbox equipped with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges despite the short overall length of the DDM4 PDW setup!

Improving on the previous DDM4 PDW AEG, this version is equipped with the EShooter Kestrel Basic ETU, offering programmable fire modes including 3-round burst, binary trigger and 6 levels of adjustable pre-cocking. This is a major improvement over the Zeus MOSFET of the original, not only enhancing reliability in the long term but giving you more exciting options and the ability to crank semi-auto response speed up to near GBBR levels!

Both internally and externally, the DDM4 PDW is at the top tier of Airsoft platforms, ideal for CQB players or aggressive playstyles outdoors. If you love licenced trademarks, a high quality metal build and plenty of attachment and customisation options in a compact, menacing form, you'll love the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU!

If you specialise in sniping and seek every possible performance advantage, the Novritsch SSG10 A1 Sniper Rifle; Full Thrust Version will definitely impress you! This rifle is pre-built by our workshop team using the Novritsch SSG10 A1 paired with the Full Thrust kit, chambered in 6.44mm Full Thrust BBs and supplied with a Full Thrust magazine, Full Thrust speed loader and a bottle of 0.62g BBs. 

The advantages of the Full Thrust setup compared to standard sniper rifles are significant, including longer range, flatter trajectory, improved accuracy and less chance of injuring your target despite improved energy retention. One might expect proprietary BBs to be a drawback, though Novritsch's Full Thrust 0.58g and 0.62g BBs are barely more expensive than the average 0.46g BIO BBs. 

When built up and put to the test, we found the Full Thrust Version of the SSG10 A1 to be positively exceptional, reaching out far further than the standard with greater accuracy and hitting with authority, even at extreme ranges. If you're a sniper at the cutting edge, keen to put the latest Airsoft technology to the test against your own custom builds, the SSG10 Full Thrust Version will blow your mind!

Short and compact like it's real world counterpart, but with some full metal weight behind it and some solid internals, it still packs a punch! 

This Airsoft stockless variation of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, enemy insurgents won't last long with this shotgun making quick work of them!

Kicking out a strong 300fps and holds up to 29 rounds per magazine. The pistol comes with one magazine and an in depth user manual showing you how to look after and dismantle the pistol.

If you have a Hi-Capa-shaped hole in your soul but demand realism, the EMG R613 STACCATO 2011 Hi-Capa XL GBB is what you need to fill it. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 XL, complete with licenced trademarks across the design in engraved, laser engraved and embossed form. 

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO XL is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with high-end styling which doesn't look like everyone else's, the R613 STACCATO 2011 Hi-Capa XL GBB from EMG will be an asset to your loadout!

This Airsoft Electric Gun is a compact SMG based on the G3 platform, which offers a tiny overall length with a Sliding Stock to extend it out to comfortable lengths, as well as a Railed Handguard and Receiver to add tactical accessories.

The Double Eagle M904L features the 'Falcon Fire Control System' which allows for programming of your Trigger, as well as massively improving Trigger Response. The FFCS gives you awesome features such as '1-5rnd Burst' and a 'Binary Fire Mode' where the Gun will fire upon Trigger release as well as pull. Including a Quick Change Spring and a lightweight but tough reinforced Polymer external build, this is not an Airsoft Gun to miss.

A dense and well constructed G36 family Airsoft replica, which is powered by electric features an integrated telescopic sight as part of the carry handle, as well as a multi-position sliding and folding stock.

If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3A1 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3A1 was the US Army's solution to the need for accelerated SMG production during the Second World War.

The Snow Wolf M3A1 is patterned after the original M3A1 Grease Gun, the second Grease Gun variant which saw the ratchet style charging handle deleted. In Airsoft terms, this means the Snow Wolf M3A1 is realistically limited to full automatic only, with the dust cover functioning as a safety catch, just like the real thing. The Snow Wolf M3A1 has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!

If you are looking for a lil CQB monster AEG but shorty AR15's don't float your boat, the CM.041PDW is worth a look! Constructed from strong alloy in all the places the real one is, with a high torque motor and impressive performance right from the box, you can dominate the CQB field in a classier manner than ARP people with this classic PDW from Cyma. 

This Airsoft electric replica of the world renowned Dragunov SVD, has a tough, full metal construction, and is true to life in that it is is semi-automatic only with a low cap mag, included in the box.

Now you can really feel like an old-school Russian sniper, with this variant sporting a tactical black look.

If you're looking for a replica, that is no frills, sturdy construction and easy to use, this Dragunov lets you pick off targets at range; Great for beginners and seasoned players alike wanting to get into skirmishing with a Russian loadout.