All Two-Tone Airsoft Guns

A MK18 Platform Airsoft Electric Gun with a strong and well-constructed external shell, including CNC Machined Billet Outer Barrel and Anodised CNC Machined Aluminium Handguard. The Gearbox contains a wealth of up-rated goodies such as a 6.01mm Inner Barrel and Reinforced Steel Gears, meaning it shoots just as good as it looks.

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you want something a bit more stylish as a sidearm, VORSK must have come to your attention by now! The EU18 Gold Match GBB pistol follows the usual VORSK formula of taking a tried and tested GBB pistol design and spicing it up with some key aesthetic changes. The EU18 Gold Match follows the same external design as its EU18 Solid slide but with matt gold accents, making the pistol stand out and giving it the classy looks of a decked-out race gun.

As with VORSK's other EU-series offerings, the EU18 Gold Match is compatible with common EU series magazines from VORSK, RAVEN or WE and is kitted out with a 6.03mm tightbore inner barrel straight out of the box, promising improved accuracy potential and a slight raise in FPS when compared to its rivals. If you seek a more elegant looking EU series which sidesteps the usual pedestrian EU series looks, the EU18 Gold Match would be a fine choice!

If you love that competition styling in a sidearm but don't have a thousand quid in your pocket, VORSK is here to make your dreams a reality! The CS Defender Pro 1911 GBB Pistol is styled after real steel competition-optimised handguns and comes with a built-in compensator, flared magazine well, ported slide and gorgeous real wood/rubber hybrid grips pre-installed.

Building on VORSK's pedigree of offering some seriously slick full metal GBB pistol designs in an affordable package with loads of spare bits included, the CS Defender gives you the option of running it in either compensated or combat configurations. In the latter state, it is compatible with 12mm CW female thread adapters so you can equip it with a tracer unit for some CQB intimidation and an instinct-aiming advantage. Whether this is your first sidearm or you want something to compliment your collection that has a bit more flare and head-turning good looks, the CS Defender Pro should do the job, and do it well!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

A gas blowback 6mm Airsoft BB Gun, based on the Hi-Capa 3.8 range this is a custom pistol designed to look as unique and modern as possible whilst still retaining all of its key features.

A Gas Blowback RAVEN F226 Airsoft Pistol, featuring an alloy slide, a 20mm underside rail accompanied by a tactical RMR ( Rear Mounted Red Dot ) This Airsoft Pistol is every Tactical Timmy's dream. Acquire your targets with speed, precision and accuracy all while looking cool AF because with this Raven 226 you're set for skirmish.

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed. This AEG is the XS version of the Ghost EMR, optimised for CQB and aggressive playstyles. 

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

Based on the iconic Steyr AUG carbine, this compact 6mm BB Airsoft gun is a lightweight and compact electrically powered replica AUG. Realistically constructed from polymer with an alloy front end, the AUG is supplied with an aluminium foregrip.

If you like a challenge in game, this will certainly give you that! The S&T ST870 Marine Magnum is a single-shot pump action shotgun boasting full metal construction, a 6.03mm tightbore inner barrel, a TDC HOP-up unit and 400 FPS +/- 10% out of the box. "But why on earth would I want a single-shot, high FPS shotgun?" we hear you ask...

The ST870 may not be your CQB platform of choice, but it fulfils a different role. This shotgun is intended to simulate a real M870 shotgun firing 12 gauge slugs which are a single, solid projectile intended for long-range engagements and hunting. This means the ST870 falls into the same class as DMRs and Sniper Rifles when it comes to skirmishing, with the added challenge that there are no iron sights or rails to be found. If you are finding skirmish life a bit too easy with a sniper rifle, the ST870 will make you work even harder but give you even more satisfaction when you land the kill!

If you're after a sidearm with attitude or a challenging primary for CQB, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off is the game changer you need. This sawn-off lever action shotgun replica works just like the real thing, feeding from realistic shells which eject when the action is worked. Being the shortest variant of the M1887, this beast would be a fantastic sidearm for close encounters, offering a 3+1 shell capacity, a fast-to-work action and a compact and lightweight form.

The Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate shots. Whether you're working on a post-apocalypse wastelands-style loadout, a Wild West-style setup or you simply appreciate a novel Airsoft gun with an exciting experience, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off is sure to put a smile on your face!

If you're after a sidearm with attitude or a challenging primary for CQB, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off is the game changer you need. This sawn-off lever action shotgun replica works just like the real thing, feeding from realistic shells which eject when the action is worked. Being the shortest variant of the M1887, this beast would be a fantastic sidearm for close encounters, offering a 3+1 shell capacity, a fast-to-work action and a compact and lightweight form.

The Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate shots. Whether you're working on a post-apocalypse wastelands-style loadout, a Wild West-style setup or you simply appreciate a novel Airsoft gun with an exciting experience, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off is sure to put a smile on your face!

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

If your next build will be a beast of a DMR, the East Crane EC-903 SR-25 PC DMR AEG; Advanced Edition would make a fine base gun! Mechanically pre-locked to semi-automatic only and equipped with internals ideal for DMR conversion, the EC-903 boasts full metal construction and fantastic attention to detail, inspired by the most recent SR-25 DMR variant, known as the SR-25 PC (Precision Carbine).

On the outside, the EC-903 Advanced is rocking a CNC aluminium URX4-style M-LOK handguard, KAC-inspired QDC flash hider and ambidextrous 20mm Picatinny railed receiver, QD sling sockets throughout the build and an AR-15 AEG spec buffer tube at the rear, pre-fitted with a high quality Crane stock replica. Inside, we're treated to the Version 2 long gearbox, featuring a long polymer piston with a full steel tooth rack, long type 0 cylinder, 18:1 steel gears running on 8mm ball-bearing bushings and a quick change spring guide for easy power tuning. The inner barrel is also a 6.04mm tightbore, offering enhanced accuracy and a slight FPS boost from the same strength spring.

If your DMR build needs to be modern, metal and menacing, the EC-903 SR-25 PC DMR AEG; Advanced Edition from East Crane is the way to go! With the prerequisite .308 style DMR looks to set it apart from standard AR-15s, modern furniture ready to be customised and internals with plenty of pre-upgrades thrown in, the EC-903 is ready to harass the enemy team at long-range!

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

If you love that competition styling in a sidearm but don't have a thousand quid in your pocket, VORSK is here to make your dreams a reality! The CS Defender Pro 1911 GBB Pistol is styled after real steel competition-optimised handguns and comes with a built-in compensator, flared magazine well, ported slide and gorgeous real wood/rubber hybrid grips pre-installed.

Building on VORSK's pedigree of offering some seriously slick full metal GBB pistol designs in an affordable package with loads of spare bits included, the CS Defender gives you the option of running it in either compensated or combat configurations. In the latter state, it is compatible with 12mm CW female thread adapters so you can equip it with a tracer unit for some CQB intimidation and an instinct-aiming advantage. Whether this is your first sidearm or you want something to compliment your collection that has a bit more flare and head-turning good looks, the CS Defender Pro should do the job, and do it well!

A Gas Blowback 6mm BB Airsoft Pistol, designed and based off the M1911 Pistol which was modified by the US Army and is in use today. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine with a Rubberised Grip.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

If you're looking for an affordable beginner platform with solid out-of-the-box performance and plenty of upgrade potential, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will suit you well! Made predominantly from high density polymer with an alloy outer barrel and steel trim parts, the SA-F01 FLEX™ is all about agility, tipping the scales at a mere 1.95KG, ideal for younger skirmishers and those who like to move fast!

Inside, the SA-F01 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F01, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you're an experienced skirmisher seeking a lightweight backup or loaner AEG, or you're fresh to the sport looking for a future-proofed, reliable and versatile starter platform, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will serve you well!

If you're looking for an affordable beginner platform with solid out-of-the-box performance and plenty of upgrade potential, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will suit you well! Made predominantly from high density polymer with an alloy outer barrel and steel trim parts, the SA-F01 FLEX™ is all about agility, tipping the scales at a mere 1.95KG, ideal for younger skirmishers and those who like to move fast!

Inside, the SA-F01 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F01, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you're an experienced skirmisher seeking a lightweight backup or loaner AEG, or you're fresh to the sport looking for a future-proofed, reliable and versatile starter platform, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will serve you well!

Based on the iconic pistol used by the US Armed Forces, this Airsoft replica B92 features white dot ironsights and diamond textured pistol grip for extra comfort. This pistol is great for those tight CQB situations where you need the extra manoeuvrability or for those times you need to get a quick draw on somebody.

WE Europe are known for their punchy gas blowback recoil, that is more gas efficient with quicker cycling speeds than other brands and the B92 is no exception!

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you're after a sidearm with attitude or a challenging primary for CQB, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off, Standard Lever will spice things up a notch! This sawn-off lever action shotgun replica works just like the real thing, feeding from realistic shells which eject when the action is worked. Being the shortest variant of the M1887, this beast would be a fantastic sidearm for close encounters, offering a 3+1 shell capacity, a fast-to-work action and a compact and lightweight form.

The Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate shots. This, the "Standard Lever" version sports the standard-sized Winchester style action lever, as opposed to the "Mare's Leg" style enlarged lever.

 Whether you're working on a post-apocalypse wastelands-style loadout, a Wild West-style setup or you simply appreciate a novel Airsoft gun with an exciting experience, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Sawn-off, Standard Lever lets you depart from the usual AEG dominated experience and enjoy the realism of skirmishing with a shell ejector!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!