All Two-Tone Airsoft Guns

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

A super compact Airsoft Single Shot 6mm BB Shotgun, based on the M870 designed for Breaching through doors and going into buildings.

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1.

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1.

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1.

If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.

The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!

The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.

Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!

If you like to tiptoe around the skirmish site and catch the enemy off guard, Delta Armory has the perfect AEG for you! Introducing the DA-B04 Silent Ops 8, an M4/AR-15 AEG of the Delta Armory BRAVO™ series. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Internally, the DA-B04 is very well equipped for the price, boasting a 6.03mm tightbore inner barrel, rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. Whether you run it as it is or plan on upgrading it top to bottom, the Silent Ops 8 from Delta Armory will serve you well!

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

If you're searching for a top-tier primary you'll never need to upgrade, get eyes on the Novritsch SSR4 Mk2 M4/AR-15 AEG! This is the latest iteration of the SSR4, boasting a fresh new look with its unique receiver, handguard and muzzle brake design with all the best bits from the original game-changing SSR4 platform.

Inside, you'll find CNC steel 16:1 gears, a 30K high-torque motor, CNC aluminium compression parts and a 6.03mm tightbore inner barrel paired with a rotary TDC HOP-up unit, just like the original. What's changed? The Mk2 boasts a super-strong reinforced gearbox shell and modular adjustable trigger system, resulting in a longer lifespan and more customization options than ever before!

On the outside, a lot has changed, including a new magnetic dust cover for more convenient HOP-up adjustment, a new buffer tube mount design which allows for easier access to the quick change spring system, not to mention the exterior design which leans into the Novritsch aesthetic with its dynamic swept back handguard and muzzle brake design. If you're after an M4/AR-15 platform with proven internals designed for pure skirmish performance and packed with user-friendly features, the Novritsch SSR4 Mk2 M4/AR-15 AEG is the one!

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA MOSFET Edition line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a type 1 cylinder and a polymer piston with a full steel tooth rack. Tying this selection of high-end internals together is the CYMA Zeus MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

A highly realistic and well-weighted Airsoft Electric Gun replica of the M1918A2 BAR (Browning Automatic Rifle), which saw action in World War II and the Korean War as a portable Light Machine Gun.

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're sick to death of M4/AR-15 AEGs, who can blame you? The Novritsch SSR77 A2 AUG AEG is a breath of fresh air, based on the old-school-cool AUG design with modern attachment interfaces and pre-upgraded internals throughout, ideal for the skirmisher who wants a unique primary platform with performance to match the latest M4 AEGs to hit the market.

On the outside, the SSR77 A2 is dressed to impress, boasting a unique CNC aluminium M-LOK handguard, reduced profile upper 20mm Picatinny rail and a pair of QD sling sockets on each side, ready to be decked out like the most cutting edge M4s. Inside, things are even more impressive! This is one of the first AUG replicas to hit the market with a programmable MOSFET pre-installed, meaning SSR77 owners can join the SSR4, UTR45 and Gate TITAN owners enjoying burst mode, binary trigger and several levels of pre-cocking adjustment. If you've ever mourned that all the sick technology is in M4 replicas, the SSR77 A2 AUG AEG should put a smile back on your face!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you seek an M4/AR-15 platform with reinforced internals focussed on reliability, the Delta Armory DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG is one to watch. Constructed with a strong high-density polymer receiver and a CNC aluminium handguard, the DA-B06 is perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Inside the DA-B06, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a KeyMod handguard equipped with pre-installed 20mm rail sections and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

If you like your primary simple, reliable and accessory-ready, the DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG will do what you need it to, with plenty of upgrade options down the line thanks to its full TM AEG compatibility. At the ideal length to contend with tight corners in CQB and distant enemies outdoors, the DA-B06 is a fantastic multi-role platform!

If you seek an M4/AR-15 platform with reinforced internals focussed on reliability, the Delta Armory DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG is one to watch. Constructed with a strong high-density polymer receiver and a CNC aluminium handguard, the DA-B06 is perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Inside the DA-B06, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a KeyMod handguard equipped with pre-installed 20mm rail sections and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

If you like your primary simple, reliable and accessory-ready, the DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG will do what you need it to, with plenty of upgrade options down the line thanks to its full TM AEG compatibility. At the ideal length to contend with tight corners in CQB and distant enemies outdoors, the DA-B06 is a fantastic multi-role platform!

If you are looking for a secondary weapon with a bit more "oomph" than a pistol, the M56B has your name on it! This pistol grip equipped breaching shotgun fires 3 BBs per trigger pull, giving you a realistic shotgun-like spread pattern to ensure you can hit those fast-moving targets in CQB. This shotgun is constructed with an alloy outer barrel and mock magazine tube, and a polymer receiver with a rubberised pump and pistol grip. The short overall length of this shotgun makes it perfect to be carried in a back scabbard and whipped out when there are rooms to be cleared.

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

For those of you looking for a budget friendly sidearm, the ST92F make for a great backup pistol, being both lightweight and quiet due to it being non-blowback.

Constructed from lightweight but high density polymer, the pistol features a TDC adjustable HOP which is unusual for a sidearm at this price range.

If you're into revolvers and seeking an affordable way to satisfy your need, the HFC HG-132B Python 4" NBB Gas Revolver is ideal. This green gas-powered non-blowback revolver is styled after the real steel Colt Python and operates just like the real thing, with a rotating cylinder, removable shells and a functional double action/single action trigger.

Being a revolver, the HG-132B will be a challenge to use in-game, and its lack of a HOP-up and relatively low FPS mean it is definitely more suitable for CQB than taking out targets at long range. Being constructed primarily from high-density polymer with an alloy outer barrel makes the HG-132B nice and light, leaning into its role as a last-ditch skirmish backup. If you have revolver fever but don't want to spend big to fill that void, the HFC HG-132B Python 4" NBB Gas Revolver is the best way to go!

A Pump Action Airsoft 6mm BB Tri-Shot Shotgun licensed by Action Sports Games from FRANCHI to provide one of the most iconic shotguns around, the SPAS-12 Shotgun.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.