All Two-Tone Airsoft Guns

If you're looking for a longer platform for outdoor skirmishing with no compromise when it comes to agility, check out the G&G Armament PRK9L Draco PCC AEG! Boasting full metal construction and a unique AK-based external design, the PRK9L is inspired by real steel Pistol Caliber Carbines popular in the 3-Gun competition sphere. Naturally, handling is impeccable, with all the ergonomic pitfalls of the AK truly cured, extended fire controls for speedy manipulation and an ultra-light extended M-LOK handguard well suited to modern shooting stances.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9L 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

As far as AK platforms go, the PRK9L is utterly unique, feeding from 9mm style magazines with sleek styling we're surprised an AK-derived design can pull off. If you need a real head-turner of a primary with killer performance and loads of accessory options, you can't go wrong with the G&G Armament PRK9L Draco PCC AEG!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like theDIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like theDIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

If you value realism and need a compact AR platform which is built like and tank with top-tier performance, you're looking for a KRYTAC EMG BARRETT REC7 MK3 SBR AEG! The latest version of KRYTAC's stunning REC7 platform, the MK3 boasts the same ever-impressive externals as the original with further internal improvements to squeeze a bit more performance out of this already beastly build!

*Note that this platform is not provided with the optic shown in the example images

Whether you're fresh to the sport, seeking a solid beginner primary, or you need a lightweight, affordable backup AEG, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET will see you kitted out! This FLEX™ line build is made almost entirely from robust high-density polymer with an alloy outer barrel and trim parts, keeping the build more affordable, agile and resistant to scratches than comparable metal builds.

Inside, the SA-F10 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F10, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. While it may be a cheap platform, Specna has definitely given us the good stuff inside!

A highly adaptable platform which can be upgraded and modified to suit any tastes in the future, the SA-F10 makes a perfect entry point into Airsoft for the future skirmisher who doesn't want to be fixed to one configuration. Ideal for a US Army loadout or an Airsofter bitten by the customisation bug, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET is ready to face whatever challenge you set for it!

Whether you're fresh to the sport, seeking a solid beginner primary, or you need a lightweight, affordable backup AEG, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET will see you kitted out! This FLEX™ line build is made almost entirely from robust high-density polymer with an alloy outer barrel and trim parts, keeping the build more affordable, agile and resistant to scratches than comparable metal builds.

Inside, the SA-F10 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F10, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. While it may be a cheap platform, Specna has definitely given us the good stuff inside!

A highly adaptable platform which can be upgraded and modified to suit any tastes in the future, the SA-F10 makes a perfect entry point into Airsoft for the future skirmisher who doesn't want to be fixed to one configuration. Ideal for a US Army loadout or an Airsofter bitten by the customisation bug, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET is ready to face whatever challenge you set for it!

If you love that competition styling in a sidearm but don't have a thousand quid in your pocket, VORSK is here to make your dreams a reality! The CS Defender Pro 1911 GBB Pistol is styled after real steel competition-optimised handguns and comes with a built-in compensator, flared magazine well, ported slide and gorgeous real wood/rubber hybrid grips pre-installed.

Building on VORSK's pedigree of offering some seriously slick full metal GBB pistol designs in an affordable package with loads of spare bits included, the CS Defender gives you the option of running it in either compensated or combat configurations. In the latter state, it is compatible with 12mm CW female thread adapters so you can equip it with a tracer unit for some CQB intimidation and an instinct-aiming advantage. Whether this is your first sidearm or you want something to compliment your collection that has a bit more flare and head-turning good looks, the CS Defender Pro should do the job, and do it well!

If you are interested in an EU series but you like to stand out, the EU17 Chrome Match from VORSK will suit your requirements. As with many other VORSK releases, this EU17 takes the tried and tested EU series design and gives it a full external makeover, inspired by high end real steel competition handguns. As such, the EU17 Chrome Match boasts raised light-enhancing iron sights, an optics-ready slide, a flared magazine well and a stylish fluted outer barrel visible through the upper slide port.

Not content with just giving you all the fancy features, the EU17 Chrome Match also has matt silver accents across the pistol, furnishing it with its killer looks. Pairing with the killer looks we also have killer performance thanks to the pre-installed 6.03mm tightbore inner barrel which improves accuracy and increases FPS. If you need a sidearm with a stylish aesthetic and the performance to back it up, the Chrome Match belongs in your holster!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you have seen the impressive performance of the EU series of GBB pistols, but you have also seen the way they look and you aren't a fan, Double Eagle has something you may appreciate! The Double Eagle JDG Polymer 80 PFS9 GBB pistol takes the superb EU series internals and puts them inside a slide and frame with a dynamic modern look. The PFS9 sports an aggressively textured pistol grip, a 20mm Picatinny frame rail, an optics ready slide and an 11mm CW threaded barrel, making the pistol ready for any task you set for it. This GBB pistol is based on the real PFS9 which is quickly rising in popularity in the US, and its redesigned "Polymer 80" frame.

If you love the 9mm AR aesthetic and require an ultra-strong yet lightweight build, the Evolution Reaper S EMR AR-9 AEG; ETS II ETU should be right up your street! Constructed with a unique receiver design using Evolution's proprietary Carbontech™ engineering polymer, a CNC aluminium handguard and a CNC aluminium buffer tube, the Reaper S EMR keeps overall weight to a minimum without compromising when it comes to quality!

Inside, the Reaper S EMR is well equipped; rocking a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick change spring guide and a sector gear delayer to maintain reliable feeding at high speed. Also inside is a 6.01mm tightbore inner barrel which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

Whether you vibe with the looks of real steel high-speed PCC setups or you need a platform which handles flawlessly with top-notch build quality, solid internals and low overall weight, the Evolution Reaper S EMR AR-9 AEG; ETS II ETU fits the bill better than most!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

A highly convincing full metal 5.45x39mm AK variant electric Airsoft gun which is built to a realistic standard, and combines modern Polymer aesthetic with an old school folding skeleton stock.

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

If you're looking for an AEG packed with pre-upgraded parts based on a cutting-edge real steel design, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG should be right up your street! Building on the previous EDGE 2.0 variant, the internals of the SA-PH23 have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

An advanced platform both inside and out, the M-416 RAHG is ideal for US Navy SEAL Operation Neptune Spear loadouts or any other modern special forces loadout, bringing high-end looks along with insane performance to the table. If you're after an eye-catching AR-derived AEG with internals to contend with the best, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG belongs in your arsenal!

Where my milsim bois at? The East Crane EC-202 M-417 DMR is the marksman rifle you have been looking for, whether you run a UKSF, Delta or any other SF loadout! Boasting full metal construction, a quick change spring system and a programmable MOSFET capable of semi-automatic only, the EC-202 is ready for whatever role you place it in, but we think it would make a beast of a DMR!

With a 6.04mm Tightbore inner barrel, rotary HOP-up unit, version 2.5/version 2 long gearbox and CHONKY 7.62x51mm style magazines, the EC-202 is kitted out for long range skirmishing, whether you push it up to DMR limits or not. On the outside, we have more 20mm Picatinny rails than we will ever need, a 14mm CCW male threaded barrel, ready for a suppressor or tracer and a snag-reducing low-profile stock with full adjustability for ease of movement. Wack a big scope on this bad boy and get to work!

If you're into WW2 reenactment or like to collect the most iconic firearms replicas around, the A&K M1 Garand AEG belongs in your arsenal! A gorgeous replica made entirely from metal and real wood, this hefty, authentic piece is a bit of a rarity on Airsoft fields but comes with more than its fair share of performance perks!

Inside, the M1 is based around a TM spec version 7 gearbox with an alloy shell, 18:1 ratio steel gears, 6mm bushings and a quick change spring guide for easy power tuning. The inner barrel is a 6.05mm tightbore for an accuracy and air-efficiency edge, and the HOP-up unit is an alloy rotary design, offering easier adjustments than the TM M14 it is based on, with full aftermarket AEG HOP-up bucking and inner barrel compatibility.

As suitable for display on the man-cave wall as it is for sending semi-auto shots out to range in a reenactment scenario, this detailed and hefty M1 Garand replica fills a niche which is often underserved in Airsoft. If you're working on a WW2 US G.I. loadout or need an impressive looking M1 to fill out the gun wall, the A&K M1 Garand AEG; Real Wood is just the thing!

If you like an aggressive military-style AR, the CYMA CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.04mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

This is the next Generation of Fully Automatic Tri-Barreled Shotguns, which takes everything great about the Tokyo Marui SledgeHammer, and cranks it up to 11.

If you need more firepower without extra length or weight, the EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher is perfect for you. This launcher has been licensed by the real steel brand Spike's Tactical and looks almost identical. It has a 12" rail mounting section so you can attach it to most common assault rifles which have a Picatinny bottom rail. To mount it, slide the launcher on your rail and open the loading action to screw in the Allen Key bolts.

This launcher has been seen in multiple movies, including John Wick 2 in its stand-alone version, which can be made with the EMG KAOS Conversion Kit For 12" HAVOC Grenade Launcher and can look something like this. Like other Airsoft launchers, the "HAVOC" 40mm requires MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, though specialised MOSCARTs that shoot different payloads are available.

If you want to give your primary a more aggressive look with a firepower increase as a bonus, the EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher will give you what you need!

If you have been looking for an affordable sidearm or base gun for your next build, the Golden Eagle Hi-capa 4.3 GBB is a fantastic choice. This Hi-capa boasts full metal construction, full Tokyo Marui compatibility and a price that is hard to believe!

Though it is based on the Tokyo Marui 4.3, the Golden Eagle Hi-capa has a 6.02mm tightbore inner barrel, adding to its accuracy potential, improving gas efficiency and raising FPS slightly. Golden Eagle also saw fit to add an 11mm CW female threaded outer barrel, meaning you don't need a new outer barrel to fit a tracer or suppressor, just an 11mm CW to 14mm CCW adapter. Unlike many other cheap GBB pistols, the Golden Eagle Hi-capa feels buttery smooth when cycling and is remarkably consistent, pointing to well-made internals and tight tolerances.

Whether you are building it out for speedsoft use or you want a cheap, full metal holster filler, the Golden Eagle Hi-capa is a great value and a great performer!

If you love that competition styling in a sidearm but don't have a thousand quid in your pocket, VORSK is here to make your dreams a reality! The CS Defender Pro 1911 GBB Pistol is styled after real steel competition-optimised handguns and comes with a built-in compensator, flared magazine well, ported slide, pre-installed BDS red dot sight and gorgeous real wood/rubber hybrid grips.

Building on VORSK's pedigree of offering some seriously slick full metal GBB pistol designs in an affordable package with loads of spare bits included, the CS Defender gives you the option of running it in either compensated or combat configurations. In the latter state, it is compatible with 12mm CW female thread adapters so you can equip it with a tracer unit for some CQB intimidation and an instinct-aiming advantage. Whether this is your first sidearm or you want something to compliment your collection that has a bit more flare and head-turning good looks, the CS Defender Pro should do the job, and do it well!

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

If you need a compact and lightweight AEG with no build-quality compromises, the Evolution Reaper XS EMR AR-9 SMG AEG; ETS II ETU is one to watch! Made from aluminium and CarbonTech engineering polymer on the outside, this agile little beast feels fantastic in the hands and is pre-fitted with the Evolution ETS II programmable MOSFET/ETU, allowing for alternate fire modes such as burst modes of various durations, binary trigger and much more. Also inside is a 6.01mm tightbore inner barrel paired with a rotary HOP-up unit, giving this compact menace respectable performance at long range.

On the outside, the Reaper XS is rocking an M-LOK handguard, 14mm CCW male threaded outer barrel and 20mm Picatinny railed receiver, making it ready to hit the field dressed up with almost any combination of accessories you choose, including tracer units, vertical or angled grips, optical sights, flashlights and aiming lasers. Whether you need a platform to give you the edge in CQB or you prefer a short and light primary to maintain your high agility, the Evolution Reaper XS EMR AR-9 SMG AEG; ETS II ETU is ideal!

An incredibly realistic Bolt Action Sniper Rifle Replica of the Type 38 Service Rifle, which was used by the Empire of Japan mainly during World War 2. It features a solid and pleasant Real Wood Stock as well as an Alloy/Steel Receiver for a weighty and realistic replica that is perfect for re-enactment or displaying on your wall.

The Action Army AAP-01 Assassin GBB Pistol already has an almost cult following already, and for great reason! This Airsoft Pistol offers incredible performance (especially in cold weather), an absolutely massive backlog of compatible accessories and upgrades, accepts incredibly common EU Series Magazines and is sold at an amazingly competitive price. We may say this a lot, but trust us when we tell you that "you don't want to miss this."

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.