CYMA Airsoft

Looking to give your CM.706 Sniper rifle a bit more range? The CYMA Upgrade set for CM.706 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

A pre-assembled, ready to use complete gearbox set designed for use in 6mm Airsoft BB replica M14 AEGs. With all the components assembled and in place, this gearbox is ready to be dropped into place in your M14 AEG, replacing any old and worn out gearboxes.

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

If you are in the market for something with stealthy looks that is also remarkably quiet to shoot, check out the CM.070 M4SD from CYMA. This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. Coupled with the included suppressor, this AEG is practically as quiet as they come out of the box!

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

An Airsoft Electric Pistol which is based on the Hi-Capa platform and offers a MOSFET for a terrifying rate of fire, making it the perfect dependable backup.

If you are looking for a pump action shotgun to lay down the law in CQB this is one of our favourites! The CM.360M M3 Super 90 from CYMA is a spring-powered pump action shotgun which uses the Tokyo Marui Tri-shot system, meaning with each trigger pull you get 3 BBs headed downrange from 3 separate inner barrels, improving hit probability by providing a shotgun-like spread pattern.

We have seen Tri-shot shotguns before, and even M3 Super 90 style ones, so what makes this so special? Well, it is full metal, giving it a solid feel in the hands and a decent but not over-the-top weight, and CYMA has added a few frills to this ancient TM design to add extra realism for those that seek it, most notably the moving mock bolt carrier and charging handle, which has been omitted from Airsoft M3 Super 90 shotguns until now. If you have a taste for realism and you need a spring tri-shot to expand your arsenal this would be a great pick!

A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The CYMA Ambidextrous Fire Selector Gears for CM.098 is a replacement original part set for the CM.098 series of SR-25 AEGs and includes the internal selector gears and axis for the CM.098 ambidextrous selector switches. 

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength. 

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines. 

A replacement side mount plate for CMYA AK47/74 series Airsoft AEG weapons, which when fitted allows users to install AK style side-mounted scope mounts.

The CYMA CM.008 M4 S-System is based on the old-school TM S-System AEG, complete with an SIR-style quad rail for mounting accessories and the hefty weight and realistic feel of full metal construction. The SIR rail system has the benefit of offering an uninterrupted upper rail for improved strength over comparable RIS systems and more space to mount larger optics such as riflescopes and red dot sight magnifier combos. 

While the SIR rail system is a bit dated compared to M-LOK and KeyMod, the S-System design will be warmly remembered by some of us old hats, offering plenty of advantages compared with a standard RIS/RAS quad rail and is a great design for someone looking for the simplicity of a quad rail in a more unique and eye-catching design. On the inside, the CM.008 follows suit with CYMA's other full metal M4 platforms, boasting a reinforced v2 gearbox, high torque motor, alloy rotary HOP-up unit and 6.03mm tightbore inner barrel to top it off. If you want a solid M4 platform with rare and interesting externals and a full compliment of upgraded internals, the CM.008 should be high up on your list!

If you are a Dragunov fan but you want the latest and greatest version of the iconic Russian DMR rifle, this is what you need! The CYMA CM.057T is a great replica of the SVD-M, the latest SVD variant to serve with the Russian armed forces. The CM.057T boasts full metal construction with a large proportion of steel in its build and weighs a substantial but not over the top 3KG approximately, meaning your mobility will not be compromised when carrying the SVD-M.

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD-M a great base platform for a DMR build. If you are after a long-range platform and want to step away from more common DMRs, the SVD-M would be perfect!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you ever wanted to light the enemy up with tracer BBs but don't like the looks of a suppressor, the CYMA Platinum SLR Airsoft Works AK-74 AEG is your dream come true! This pre-upgraded AK AEG is officially licenced by SLR Rifleworks and boasts a full metal build with plenty of steel, CYMA's impressive E-EDITION High Speed internals and a tracer unit integrated into the HOP-up unit, meaning you don't need to add length or weight with a tracer unit to get an instinct aiming advantage in CQB or low light skirmishes.

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-74 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

Whether you seek a modernised AK to add to your arsenal or you are smitten by the sound of a built-in tracer unit, the CYMA Platinum SLR Airsoft Works AK-74 AEG will make your day with its thunderous rate of fire, superb long range accuracy, flawless build quality and now, programmable fire controls!

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

If you need a new nozzle for your CYMA CM.057 or Real Sword Dragonov SVD, CYMA has you covered! The Aluminium Nozzle for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and compatible with the CYMA CM.057 SVD/SVU AEG series and the Real Sword Dragunov SVD AEG. 

This is a replacement original part specifically designed for the Real Sword pattern SVD gearbox used in the CYMA CM.057 series and is not compatible with A&K SVDs or others. If you've built a beast of a DMR with your SVD and you want to get ahead of any potential parts failures this is a great part to have in the toolbox!

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you need a new cylinder head to fix up your Dragunov, check this out! The CYMA Aluminium Cylinder Head for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and is fitted with two O-rings to seal any gaps between it and the cylinder for perfect efficiency and minimal air loss. 

The cylinder head also has a sound dampening pad installed on the rear face which reduces gearbox noise and protects the piston head from the force of repeated impacts. A replacement original part for the CYMA CM.057 SVD/SVU series, this cylinder head is also compatible with the old Real Sword Dragunov SVD!

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

The Stainless Steel Cylinder for CM.701 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.701 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If your Tokyo Marui ZET system M4/AR-15 needs some steel to keep it strong, the CYMA CGS Adjustable Trigger Box for TM ZET System M4/AR-15 GBBR belongs on your shopping list! This complete trigger box is ready to drop in and contains full steel trigger components which should last practically forever in normal use. The box is compatible with both CYMA's CGS M4/AR-15 GBBR series and Tokyo Marui ZET system M4/AR-15 GBBRs. 

Along with its steel construction, the extra perk of this box is its ability to adjust the hammer stroke strength, translating into adjustable FPS by varying the force with which the hammer strikes the valve knocker. As always, we recommend internal upgrades only for those who are confident in how to install them, but with this trigger box being pre-built, most of the hard work has been done for you!

if you're looking for a replacement Motor Cage for your TM-spec Thomspon AEG, you've just found one! The CYMA Motor Cage for CM.033/051 Thompson AEGs is a replacement original part from the CM.033/051 series and should fit most Thompson and Aliens M41A Pulse Rifle AEGs on the market, assuming they are Tokyo Marui spec internally. The set includes both sides of the motor cage but doesn't include screws so make sure you have these ready for installation. 

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD.

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov.