CYMA Airsoft

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you're in search of a cylinder for a version 2 or version 3 gearbox, CYMA has what you need! The Type 2 Ported Cylinder for V2 & V3 Gearbox is CNC machined from steel and boasts a polished inner surface for reduced friction. Being a "Type 2" cylinder, this cylinder includes a port to bleed off excess air, ideally used with inner barrels between 270mm and 430mm in length. Compatibility-wise, this cylinder fits version 2 and version 3 gearboxes and as always, we only recommend internal parts for those who are confident working on AEG internals.

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

Whether you need to tune FPS or seek a more robust, reliable build, the CYMA CGS CNC Aluminium Nozzle Set w/Adjustable Valve for CGS/TM GBBR is a great buy for any TM ZET System M4 or CGS M4 GBBR owner. This nozzle is made from CNC machined 7075 aluminium, making it incredibly strong and well up to a hard life of hard recoil!

The set includes an adjustable NPAS-style valve and a non-adjustable valve, giving you the option to stay versatile with adjustable FPS or stick to a fixed valve for better consistency. Compatibility-wise, this nozzle set is designed for the CYMA CGS M4 GBBR series and is confirmed to fit the Tokyo Marui M4 ZET System GBBR series, and while it should work, we are unable to confirm compatibility with Double Eagle ZET System clones. We can say for certain this won't work in a WE or Golden Eagle GBBR.

If you want to use your GBBR in CQB one day and as a DMR the next, the CYMA CGS CNC Aluminium Nozzle Set w/Adjustable Valve for CGS/TM GBBR is the part you need to make that happen. Far stronger than polymer nozzles and precisely made with CNC machining, if you want to keep your GBBR recoiling hard in the long run, this part is ideal!

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.

A spare or replacement Magazine for the CYMA CM.700 / M40A3 Spring Powered Sniper Rifle, which is perfect for staying in the fight for longer, or spending longer on the Target Range without re-filling Magazines. If you own one of these Sniper Rifles and want carry more ammunition, then these slimline and lightweight Magazines are perfect to carry on your person; especially if you've made the effort to obtain a concealed position and don't want to give it away!

If you're fixing up an old AR36 AEG, the CYMA HOP-up Chamber with Bucking for AR36 AEGs is a great way to give it a new lease of life! A complete original replacement parts set including a polymer HOP-up chamber, HOP-up arm, bucking, nub and C-clip, giving you everything you need to revamp your HOP-up setup.

This set is compatible with TM-based AR36 AEG designs such as CYMA and Jing Gong, but won't fit the TM NGRS AR36 series. Whether you have a well-used AR36 which needs a refresh or you want to keep essential spares handy just in case, the CYMA HOP-up Chamber with Bucking for AR36 AEGs is a great addition to any AR36 AEG owner's toolbox!

A replacement flash hider for any Airsoft weapon with a 14mm counter-clockwise thread. It's designed to replicate the original iconic AKM flash hider.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

This SR25 Gearbox set by CYMA is designed to fit right into most SR25 / AR25 / AR10 style Airsoft Rifles / Guns. Included is a Piston, Cylinder, Gear Set, Tappet Plate, Nozzle. This GEARBOX set does not come with the shell, internals only.

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you need a replacement bolt handle for your CM.707 Sniper rifle you are in luck! This CYMA part is an original replacement, intended for the refurbishment of an old and worn out sniper rifle. The handle is constructed from steel and does not include the polymer end piece so you will need the original end piece from your rifle to complete it.

If you've damaged the stock of your CYMA CM.103 AK Alfa, here's what you need to fix it! The CYMA Stock for CM.103 AK Alfa AEG is a replacement original parts set for the CYMA Platinum CM.103, a complete stock setup identical to the one pre-installed on the AK Alfa. This stock boasts 6 length of pull adjustment positions, 4 cheek riser positions and side folding functionality but is only compatible with the CYMA Platinum CM.103 AK Alfa AEG. 

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.