New Airsoft Guns & Products

If you're a CQB specialist seeking cheap green tracer BBs, load up on Delta Armory 0.20g EAGLE™ Tracer BBs; 1KG Bag; Green! Supplied in a 1KG bulk bag containing approximately 5000 BBs, these tracer BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need tracer BBs which won't break the bank, look no further!

If you're looking for 0.28g BIO BBs for woodland warfare, Delta Armory 0.28g BIO EAGLE™ BBs; 1KG Bag are a fine choice. These BBs are supplied in a 1KG resealable bag of approximately 3571 BBs, more than enough to dominate a woodland environment!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BIO BBs which won't break the bank, look no further!

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Mini-Tamiya connector and provides 1300mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 1300mAh 15C LiPo Nunchuck Battery; Mini-Tamiya would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

If you need mags for the stunning new Delta Armory STRIBOG™, you've found what you need! The Delta Armory 100rnd Magazine for Grand Power STRIBOG™ SP10A3 AEGs is a spring-fed mid-cap magazine, made with a transparent polymer shell showcasing realistic mock 10mm AUTO cartridges. The mag holds 100 BBs approximately and is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool.

Being designed specifically for Delta's STRIBOG™ series, it's unlikely this mag will work in other platforms, but we will be carrying out tests to confirm when we have them in hand. Sizing-wise, this mag should be a similar size and shape to UMP and UTR45 mags, meaning UMP/UTR mag pouches should be a perfect fit.

If you're after a starter sidearm with everything you need to get stuck in, here you go! Our EU17 Pre Two-tone Pistol pack includes the sporty VORSK EU17 Vented Slide GBB Pistol, a can of SMART Green Gas, 4000 Delta Armory 0.25g EAGLE BBs, a Speed Loader and a HASTA Hard Pistol Case. 

If you need spare mags, the EU17 Vented is compatible with the RAVEN 50rnd Extended Magazine for EU series, perfect for those who need extra firepower!

This revolver is iconic! The Single Action Army, also known as the Colt Peacemaker, is a revolver that has been in production since 1873. That's over 150 years that this revolver has been in production for, and it is just as loved now as it was those many moons ago when it was the U.S Army's standard issue pistol.

The Tokyo Marui Airsoft version has a full polymer body with a metal trigger. This makes it lightweight and is perfect considering it is a springer revolver, meaning you need to cock the hammer with your thumb each time you want to shoot. It comes with shells that hold a BB each and can be loaded into the revolver's 6 chambers.

This is by no means an Airsoft pistol that will carry your next Airsoft game, but it looks incredible, is crafted by Tokyo Marui, and has that satisfying revolver feel with individual shells. It's an absolute treat!

Get the BLS 0.20g Airsoft Precision BBs; 1KG Bag for all your CQB needs! These BBs come in a resealable bag and contain roughly 5000 BBs. That's plenty for all your close quarters needs such as Airsoft assault rifles, pistols, shotguns and MOSCARTs!

They're not just good for CQB; if you have a heavy trigger finger or enjoy the support gunner role, BB specifics don't matter just so long as a lot are coming out of your gun! BLS are well known for its high-quality and reliable BBs, with a consitent polish and shape meaning that all your shots feel the same.

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this battery is the perfect fit! Electro River 7.4V 1200mAh 20/40C LiPo Slim Stick Battery; Mini-Tamiya is ideal for long, slim battery compartments, measuring approximately 18.5cm x 0.8cm x 1.4cm with a 10cm wire length, and is pre-wired to a Mini-Tamiya connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 20C continuous discharge rate, a peak discharge rate of 40C and a capacity of 1200mAh. 

These are the perfect BB for an upgraded long-range focused setup! The BLS 0.32g 6mm Perfect Tracer BIO BBs come in a 1KG resealable bag and contain roughly 3120 BBs. These BBs are the perfect choice if you want to stock up for a whole month at least and do not want to worry about running out.

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinctive aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

Their polished surface ensures consistent and reliable feeding. Plus, when used with a tightbore barrel, you get great accuracy potential. If you need biodegradable tracer BBs which won't break the bank, look no further!

If you need mags for your LCT LK-33 or LK-53, you just found them! The LCT 100rnd Magazine for LK-33/53 AEG [LK004] is a spring-loaded mid-cap magazine which holds approximately 100 BBs, loaded through the fill/feed port on the top of the magazine body. 

The magazine itself is made with a realistic stamped steel shell, polymer internals and a steel feed spring, perfectly matching the shape and appearance of real HK33 25-round magazines when inserted. Compatibility-wise, this magazine is specifically for the LCT LK-33 and LK-53 AEGs, but should also work with the Electric Blowback LCT LK-33/53 variants. 

If you're looking for comfortable full-face protection which covers the head too, the JT Premise Full Face Airsoft Mask with Headshield belongs on your noggin! Designed to protect against paintballs and Airsoft BBs, this full-face mask covers your entire face, from the chin right up to the forehead, held firmly in place with an adjustable elastic head strap and an adjustable chinstrap for extra security. 

This, the "Headshield" version, also covers the top, sides and back of your head with a removable headshield made from flexible thermoplastic, making it a far lighter, more breathable and comfortable alternative to a helmet and mask combo. The pre-installed anti-fog lens is a single-pane example made from polycarbonate, but it can be swapped out for any aftermarket lens from the JT Spectra lens lineup. The internal foam padding can also be swapped out without tools, meaning if your well-used mask doesn't have to be replaced, simply swap the foam for a fresher experience! 

With a wide range of adjustments suitable for child-sized heads right up to full adult melons, the JT Premise Full Face Airsoft Mask makes a great first face protection setup or a fantastic loaner for when your mates want to get involved. If you prefer the security and comfort of single-piece face protection but you don't fancy taking BBs to the back of the head, the JT Premise Full Face Airsoft Mask with Headshield will serve you well!

For this week only (13th-21st of September 2025), we're offering the chance to kit yourself out with an M8870 V2 Gas Shotgun, and we'll throw in an 8Fields Tactical Back Scabbard, 6 extra shotgun shell magazines, a can of SMART green gas and a 1KG bulk bag of Delta Armory EAGLE™ BBs for free!

The Golden Eagle M8870 V2 is an absolute killer up close, offering the choice of 3 BBs per shot or a stunning 6 for a realistic shotgun-style spread. If you need to land hits on moving targets quickly, this is the tool to use. Being based on the proven TM M870 design, but more immune to gas leaks, running this full metal pump action in-game is an experience without equal!

The free shotgun scabbard means you can take the M8870 with you into outdoor games and keep it handy for close encounters. Having 6 shells on tap means you'll be doing a lot of pumping before you run dry, and free BBs and gas should keep you fueled for a good few games!

As mentioned, this offer is ONLY available this week, so if you want a pump-action for a great price with a pile of freebies thrown in, now is the time!

If you need an ultra-compact SMG for kissing distance engagements, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU has your back. A rock-solid build making use of a CNC-machined aluminium handguard and buffer tube with an alloy outer barrel and Carbontech™ engineering polymer receiver, the Reaper is as strong as it is light, with realistic weight distribution and plenty of accessory options built in.

Inside, the Reaper XS EMR is well-equipped, featuring a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick-change spring guide, and a sector gear delayer to maintain reliable feeding at high speeds. Also inside is a 6.01mm tightbore inner barrel, which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

This, the Reaper XS, is the shortest of the bunch, ideal for CQB sites or running as a sniper's backup, giving you competitive performance in a more compact package. If you need a platform to deal with tight turns without slowing you down, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU suits your needs perfectly!

If you need some hefty BBs for your upgraded primary, Delta Armory's 0.30g EAGLE™ BBs; 1KG Bag are the perfect choice! These BBs are supplied in a 1KG resealable bag of 3333 BBs approximately, more than enough to give the enemy what for at the peak of Airsoft range!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need BBs which won't break the bank, look no further!

If you're after cheap biodegradable tracer BBs, your needs have finally been met with Delta Armory's 0.20g Tracer BIO EAGLE™ BBs; 1KG Bag. Supplied in a 1KG bulk bag containing approximately 5000 BBs, these bio tracer BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

This tiny Specna Arms 7.4V 1300mAh 30C Micro PEQ LiPo Battery is the best fit for a PEQ box wired gun, such as the Specna Arms SA-H01. It can squeeze into some tight spots, with its dimensions of 6.5x1.5x3.5cm; it will sadly not fit in PDW stocks, but may fit in some SMG and AR36 handguards.

As it is a 7.4V LiPo, it is compatible with almost every Airsoft gun, plus, its Deans-style connector is optimal as most modern Airsoft guns are coming with Deans connectors installed due to its lower electrical resistance when compared with Tamiya connectors. If you need a small battery for your Airsoft platform, the Specna Arms 7.4V 1300mAh 30C Micro PEQ LiPo Battery; Deans could be the best choice for you!

If you're running an M4 with a crane stock and need a longer-lasting battery, the GFC 9.6V 2200mAh Ni-Mh Nunchuck Battery; Mini Tamiya is a good shout. A battery of 8 cells formed into a single long cell group, this 9.6V rechargeable NiMh battery is a perfect fit for M4 AEGs with a Crane battery stock (or similar battery stock design) and also fits great in AEGs with fixed stock battery compartments (M16, etc.). Please note, to install this battery in a Crane Stock-equipped M4, you will need to place one of the cell groups inside the buffer tube. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you have your ear to the ground on the latest Airsoft releases you have probably already seen the teaser videos of the new ARP9 3.0, which takes the ARP9 shape and breaks the mould, replacing the standard but effective version 2 gearbox internals with a new G&G gearbox, dubbed the MIG (MOSFET Integrated Gearbox).

The MIG features G&G's new MOSFET system which is smaller and more efficient than ever before, and a QD spring guide to allow for easy power tuning without needing to take the gearbox apart. Other innovations include a new side folding stock system, known as the CHFS, and a new double-feed magazine. The other awesome G&G pre-upgraded internals remain, including the epic 25,000 RPM high speed motor which is ready to provide the thunderous rate of fire the ARP9 is known for.

G&G has never heard the old saying "if it ain't broken, don't fix it", and continuously seeks to improve its products with genuine innovation despite the fact that they are already amongst the best AEGs money can buy. Other AR-9 platforms, you better watch out, the ARP9 3.0 is coming in hot!

If you're looking for finishing touches to your loadout, the ACM TD202 Dummy Knife with Sheath is a great addition! A rubber mock knife with a fabric sheath included, this dummy melee weapon has a mock blade made from flexible, harmless rubber, which bends through 90° with minimal pressure applied. 

The included sheath can be mounted to belts of 2" width or less via the Velcro loop on the rear, and you can also use the brass ring at the top if you prefer the mock knife lower on your second line (belt kit). Whether you're after a safe Airsoft melee weapon or you're looking for realistic finishing touches for your loadout, the ACM TD202 Dummy Knife with Sheath will do the trick!

If you're looking for finishing touches to your loadout, the ACM TD202 Dummy Knife with Sheath is a great addition! A rubber mock knife with a fabric sheath included, this dummy melee weapon has a mock blade made from flexible, harmless rubber, which bends through 90° with minimal pressure applied. 

The included sheath can be mounted to belts of 2" width or less via the Velcro loop on the rear, and you can also use the brass ring at the top if you prefer the mock knife lower on your second line (belt kit). Whether you're after a safe Airsoft melee weapon or you're looking for realistic finishing touches for your loadout, the ACM TD202 Dummy Knife with Sheath will do the trick!

If you're looking for finishing touches to your loadout, the ACM TD202 Dummy Knife with Sheath is a great addition! A rubber mock knife with a fabric sheath included, this dummy melee weapon has a mock blade made from flexible, harmless rubber, which bends through 90° with minimal pressure applied. 

The included sheath can be mounted to belts of 2" width or less via the Velcro loop on the rear, and you can also use the brass ring at the top if you prefer the mock knife lower on your second line (belt kit). Whether you're after a safe Airsoft melee weapon or you're looking for realistic finishing touches for your loadout, the ACM TD202 Dummy Knife with Sheath will do the trick!

If you need a NiMh battery for a top-wired AK or SMG-5K/MP5K AEG, the GFC 9.6V 1600mAh Ni-Mh Stick Battery; Mini Tamiya is the way to go! A battery of 8 cells formed into a single long cell group, this 9.6V rechargeable NiMh battery is a perfect fit in AK AEGs with a battery compartment inside the dust cover or SMG-5K/MP5K AEGs with a battery housed inside the receiver. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

If you're after cheap bio tracer BBs for long-range warfare, Delta Armory's 0.30g Tracer BIO EAGLE™ BBs; 1KG Bag is the best option out there! Supplied in a 1KG bulk bag containing 3333 BBs approximately, Delta's EAGLE™ BBs are significantly cheaper than rival brands, with no sacrifice when it comes to quality.

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

If you're after affordable bio tracer BBs for an upgraded setup, Delta Armory 0.32g Tracer BIO EAGLE™ BBs; 1KG Bag are a great shout. Supplied in a 1KG bulk bag containing 3120 BBs approximately, Delta's EAGLE BBs represent unheard-of value for money, being far cheaper than rival brands. If you're used to feeding your gats with 0.32g bio tracers, we're sure you already know too well!

These BBs glow green when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Being made from biodegradable material also means you can shoot outside without worrying about clean-up!

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need biodegradable tracer BBs which won't break the bank, look no further!

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Deans connector and provides 2000mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 2000mAh 15C LiPo Nunchuck Battery; Deans would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

If you love Z Co style PT-1 and PT-3 stocks but you run a primary with a 1913/20mm interface, this adapter will put a smile on your face! The LCT 1913/20mm Picatinny to Z Stock Adapter allows LCT Z Co PT-1 and PT-3 stocks to be fitted to the up-and-coming 1913/20mm Picatinny stock interface found on MPX, MCX, VMP-2S/SD/C and Delta Armory Stribog platforms.

While the 1913 interface has plenty of stock options available, the Z Stock Adapter gives you the option of mounting multi-adjustable and aggressively styled Russian-inspired stocks for a unique style up. Compatibility-wise, this adapter is confirmed to fit LCT Z Co stocks but may require modification for 5KU, CYMA, ARCTURUS or real steel Z Co PT-1 and PT-3 stocks.

If you have serious power demands and LiPo batteries don't cut it, Titan Power has you covered with the game-changing 7.4V 3000mAh Li-Ion Stick Battery; Deans Connector! Designed to fit into AR buffer tubes (some may require the stock to be extended), this power-dense Li-Ion battery has innumerable benefits over standard LiPos, including more robust steel-cased cells, larger capacity and no chance of swelling. 

Titan Power Li-Ion batteries can be charged through a standard LiPo balance charger using LiPo settings or with a B6-style smart charger (sometimes known as 4-button smart chargers) using "LiPo Balance" settings. Titan Power advise not charging using "Li-Ion" mode as this is generally intended for higher capacity batteries. 

As always, we recommend using a LiPo Safe Charging Bag for both charging and storage, and never leaving a battery on charge unattended. If you need a battery which will definitely keep your AEG going over long durations, the Titan Power 7.4V 3000mAh Li-Ion Stick Battery; Deans Connector is the best option out there!