New Airsoft Guns & Products

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Deans connector and provides 2000mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 2000mAh 15C LiPo Nunchuck Battery; Deans would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

If you love Z Co style PT-1 and PT-3 stocks but you run a primary with a 1913/20mm interface, this adapter will put a smile on your face! The LCT 1913/20mm Picatinny to Z Stock Adapter allows LCT Z Co PT-1 and PT-3 stocks to be fitted to the up-and-coming 1913/20mm Picatinny stock interface found on MPX, MCX, VMP-2S/SD/C and Delta Armory Stribog platforms.

While the 1913 interface has plenty of stock options available, the Z Stock Adapter gives you the option of mounting multi-adjustable and aggressively styled Russian-inspired stocks for a unique style up. Compatibility-wise, this adapter is confirmed to fit LCT Z Co stocks but may require modification for 5KU, CYMA, ARCTURUS or real steel Z Co PT-1 and PT-3 stocks.

If you have serious power demands and LiPo batteries don't cut it, Titan Power has you covered with the game-changing 7.4V 3000mAh Li-Ion Stick Battery; Deans Connector! Designed to fit into AR buffer tubes (some may require the stock to be extended), this power-dense Li-Ion battery has innumerable benefits over standard LiPos, including more robust steel-cased cells, larger capacity and no chance of swelling. 

Titan Power Li-Ion batteries can be charged through a standard LiPo balance charger using LiPo settings or with a B6-style smart charger (sometimes known as 4-button smart chargers) using "LiPo Balance" settings. Titan Power advise not charging using "Li-Ion" mode as this is generally intended for higher capacity batteries. 

As always, we recommend using a LiPo Safe Charging Bag for both charging and storage, and never leaving a battery on charge unattended. If you need a battery which will definitely keep your AEG going over long durations, the Titan Power 7.4V 3000mAh Li-Ion Stick Battery; Deans Connector is the best option out there!

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

If you've been browsing modern SMG designs, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG should be on your radar! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the CHARLIE™ "Standard" version, made predominantly from Delta's fibre-reinforced polymer with alloy, aluminium and steel trim parts. Designed to be agile and robust in equal measure, this STRIBOG™ variant will be an asset to any skirmisher seeking performance in a modern, mission-ready exterior.

Inside, little is standard about the STRIBOG™! Equipped with the same upgraded SHS components as Delta's M4/AR-15 series, including a polymer piston with a full steel tooth rack, a reinforced tappet plate and sector gear delayer, this beast brings Delta Armory's impressive reinforced internals to a stylish new shape. A true quick-change spring system makes power tuning easy, requiring minimal disassembly and no need to remove the gearbox from the receiver to hone the STRIBOG™ for your needs.

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven pre-upgraded internals. Whether you’re into the latest real steel SMG designs or you appreciate a versatile, agile and hostile AEG with heaps of functional benefits, the Delta Armory STRIBOG™ should be on your shopping list!

Sniper rifles don't get more stylish than this! The Tokyo Marui VSR-ONE Bolt Action Sniper Rifle; Gold Edition is the latest addition to Tokyo Marui's long line of reliable and consistent sniper rifles. This, however, is a cut above the rest with its fancy gold trimmings, sleek design and completely awesome style. 

It is the modern edition of the classic VSR-10 style, opting to ditch the fixed stock and semi pistol grip for a full shape ergonomic pistol grip and streamlined folding stock! It also boasts other useful features, such as an enlarged bolt handle, M-LOK handguard and 20mm top rail!

If you're a fan of the US Army M4A1 look, the Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG should suit you perfectly! Taking the classic M4A1 shape, Specna Arms has given this beastly full metal build internals to match its external quality, including a powerful Dark Mattery brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate for reliable feeding and plenty more!

The PRIME™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're looking for a highly modular primary with a military aesthetic, a hefty full metal build and pre-upgraded internals to rival the best, you've just found what you need! The Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG is about the best an M4A1 AEG can get in this price range, miles ahead of its rivals!

If you're after a high-performance primary with a militant aesthetic, check out the Specna Arms SA-P04 PRIME™ M4A1 CQBR AEG! Equipped with some of the best internals we've ever seen in an out-of-the-box AEG, the SA-P04 boasts a powerful Dark Matter brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate, and much, much more!

The Prime™ is Specna's newest line of AEGs, taking its traditional AEG silhouettes and stripping away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're into the classic M4A1 look and want the best internals an out-of-the-box AEG can hope for, Specna Arms has your six with the SA-P04 PRIME™ M4A1 CQBR AEG. A beast in terms of both build quality and performance, the SA-P04 is the ideal base for any military-style custom build!

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you're looking for a lesser-seen GBBR with pinpoint performance, the Tokyo Marui Howa Type 89 ZET System GBBR should be on your shopping list. A superb quality full metal build utilising Tokyo Marui's proven ZET system internals, this GBBR replicates the Howa Type 89 assault rifle, the standard issue rifle of the Japanese Ground Self Defence Forces (JGSDF). 

Being a Japanese rifle replicated by a Japanese company, the Type 89 GBBR boasts all the realistic features a true stitch-counter would expect, including authentic Howa markings, a four-position fire selector with 3-round burst, a sliding dust cover which opens automatically when the bolt cycles and a remarkably comfortable AR-18-based pistol grip. The handguard is made from a realistic combination of stamped steel with a polymer overmould, and beneath, we are treated to an authentic short stroke piston system which cycles with each shot and looks exactly like the real deal. 

Built with a museum-worthy exterior and ZET system internals, the Type 89 brings top-tier TM performance to an exciting and rare shape. Whether you're working on a JGSDF loadout, you've got a pile of M4 ZET system mags or you collect the most realistic replicas of modern assault rifles, the Tokyo Marui Howa Type 89 ZET System GBBR will put a big smile on your face!

If you're looking for a hydration system to provide water for long-duration operations, the 8Fields Tactical 3L Hydration Bladder with Hose & Bite Valve is what you need! A 3L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're involved in longer skirmishes and need a hydration system with significant capacity, the 8Fields 3L Hydration Bladder with Hose & Bite Valve fits the bill!

If you run red tracer BBs and need a cheap reload, Delta Armory 0.20g EAGLE™ Tracer BBs; 1KG Bag; Red is the way to go! Supplied in a 1KG bulk bag containing approximately 5000 BBs, these tracer BBs glow red when shot through an Airsoft tracer unit, giving you an instinct aiming edge up close and a massive psychological warfare advantage. Please note, not all tracer units are compatible with red tracer BBs. Please check that your unit is compatible before ordering to avoid disappointment.

EAGLE™ BBs are a more affordable alternative to Delta's Diamond BBs, boasting tight tolerances of only +/- 0.01mm maximum size deviation between each BB. Their high-polished surface ensures feeding is reliable and accuracy is on point, especially when used with a tightbore barrel. If you need tracer BBs which won't break the bank, look no further!

If you're after an 8.4V NiMh battery for a crane stock battery compartment, the GFC 8.4V 1600mAh Ni-Mh Crane Stock Battery; Mini Tamiya is ideal. A 7-cell rechargeable NiMh battery pre-wired to a mini-Tamiya battery connector, this Crane configuration battery is ideal for rear-wired M4/AR-15 AEGs with Crane stock battery compartments. Wire length is approximately 10cm, giving you a bit of extra flexibility for easy installation. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

If you're after World War 2 replica gear to get the look to match your primary, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt will do the trick! A highly authentic replica of the real US G.I. M1 Garand cartridge belt designed to hold real steel 8-round Enbloc clips, this belt kit is made from cotton canvas with steel hardware, just like the real thing!

Being sized to fit real Enbloc clips, the pouches on this belt unfortunately don't fit Airsoft M1 Garand magazines, though they can still be used for smaller items and filled out to give your loadout a more realistic look. Sizing-wise, this belt can fit any waist size up to 43 inches and can be adjusted by sliding the belt through the steel loops on the inside. If you're working on a US G.I. loadout, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt is essential!

If you're after World War 2 replica gear to get the look to match your primary, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt will do the trick! A highly authentic replica of the real US G.I. M1 Garand cartridge belt designed to hold real steel 8-round Enbloc clips, this belt kit is made from cotton canvas with steel hardware, just like the real thing!

Being sized to fit real Enbloc clips, the pouches on this belt unfortunately don't fit Airsoft M1 Garand magazines, though they can still be used for smaller items and filled out to give your loadout a more realistic look. Sizing-wise, this belt can fit any waist size up to 43 inches and can be adjusted by sliding the belt through the steel loops on the inside. If you're working on a US G.I. loadout, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt is essential!

If you're running a retro AEG and need a battery with a Large Tamiya connector, GFC has you covered! The 9.6V 2200mAh Ni-Mh Nunchuck Battery; Large Tamiya is an 8-cell NiMh battery wired in nunchuck configuration as two cell groups with 5cm of wire length between the cells and the pre-wired Large Tamiya connector. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

Ideal for fixed stock battery compartments but a bit too chonky for crane stocks, this battery is ideal for Cybergun FAMAS replicas or older TM AEGs with Large Tamiya connectors (TM M14, M16A1/A2, FAMAS, etc.). 

If you're after magazines for the super slick G&G TGM SMG, you just found them! The G&G Armament 130rnd Medium Capacity Magazine for G&G TGM AEG is made with a super-strong high-density polymer shell, transparent polymer internals and a steel feed spring, featuring witness windows on the sides so you can track your round count as you shoot. 

As with other mid-cap magazines, this mag can be loaded through the fill/feed port on the top using a speed loader or loading tool. Being an innovative four-channel converging magazine design, this mag squeezes extra capacity into a standard-length mag, similarly to G&G's newest ARP9 magazines. Compatibility-wise, this mag is designed specifically for the G&G TGM R5 AEG series and is unlikely to work with other SMG-5 AEGs. If you're after mags for G&G's reinvention of the legendary MP5 design, the TGM, load up on these!

If you need an optic on your A&K M249, this is what you need to achieve it! The A&K 20mm Picatinny Railed Top Cover for M249 AEGs is a replacement original part designed for A&K's full metal M249 series, but may also fit other brands and the A&K polymer version, potentially requiring modification.

This top cover is made from alloy and includes a pre-installed steel dust cover, so you don't have to mess about swapping your old one out and getting those fiddly springs in place. The cover also includes holes so you can mount your original rear iron sight behind the rail. If you're short of an optic mounting solution for your M249 AEG, the A&K 20mm Picatinny Railed Top Cover for M249 AEGs will sort you out!

If you're rocking a cutting-edge primary with the 1913/20mm Picatinny stock interface, get eyes on this beauty! The LCT 1913/20mm Picatinny X Folding Stock Set is made from a combination of a CNC 6061 aluminium stock bar, S45C Steel folding mech and polymer butt plate, a unique side folding stock design inspired by real-world 1913 stocks. Quality-wise, this stock is top-notch!

The set includes two butt plate options, giving you the option to choose the look which suits your build and loadout best. The stock bar is skeletonised to mimic the looks of real steel 1913 stocks and includes an ambidextrous QD sling socket, ready for QD sling swivels on either side. If you're styling up your 1913 interface-equipped platform, the LCT 1913/20mm Picatinny X Folding Stock Set is a versatile alternative to more common stock options!

If you're into the TTI aesthetic and want a speedy Hi-Capa with aggressive looks, the Army Armament TTI Alpha Race Hi-Capa GBB Pistol; Upgraded Version should be in your sights. This slick speed-optimised Hi-Capa platform boasts full metal construction, a pre-installed 3-gun style extended compensator and an optics-ready slide, complete with an RMR/Docter footprint mounting plate.

This, the "Upgraded Version" of the Alpha Race is equipped with CNC aluminium slides and steel hammer group components thanks to a partnership between JAG Precision and Army Armament. This provides a superior finish and improved reliability over the already impressive original version, along with the performance benefits of Army Armaments latest cold resistant nozzle and its new formula for rubber parts. If you missed out on the original Alpha Race, the Upgraded Version will make you glad you waited!

If you love steel in large quantities, you'll love the LK-53A3  M-LOK AEG; ETU Version from LCT! Built to an incredible standard using a stamped steel receiver and welded stamped steel cocking tube, this is about as realistic as it gets in Airsoft! Inspired by the giant MP5 or mini G3 from the real steel world, this modernised example is rocking an M-LOK handguard and 1913/20mm Picatinny stock interface at the rear, giving this boomer build some zoomer customisation options!

Inside, the LK35A3 is no slouch, based around a version 2 gearbox with 18:1 steel gears running on 9mm bushings, a polycarbonate piston with a full steel tooth rack, CNC aluminium cylinder and piston heads and a steel quick-change spring guide with ball bearings in its base to reduce wear on the gearbox shell. Also inside is an in-line MOSFET/ETU to prevent trigger lockups and 18AWG low-resistance wiring for peak electrical efficiency. 

A real beast both inside and out in a head-turning design rarely seen on skirmish sites, the LCT LK53A3 brings unique custom vibes to the table in a hefty, realistic build. If you're looking for an AEG build at the peak of realism with some modern custom touches, the LCT LK-53A3 M-LOK AEG; ETU Version should be on your shopping list!

If you seek a platform pre-upgraded to the nines which can go anywhere and do anything, your needs have been met with the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG! A full metal build with a lightweight skeletonised M-LOK handguard, the SA-P20 is ultra-modern on the outside and kitted out internally with the best feature set we've seen in a mass-produced AEG!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're after a full metal platform with the length to compete at long range and the agility to turn and burn up close, the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG should be on your shopping list. Upgraded beyond any other mass-produced platform you can buy off the shelf with Specna's ultra-modern full metal externals, the SA-P20 is ready to rock!

If you're in search of a stylish M4/AR-15 AEG and want a modern look, the Sector ASTRA IV Shadow M4 AEG is an excellent choice. This full-metal M4 platform is inspired by the latest AR platforms in the real steel world, boasting a uniquely designed receiver with a waffle-gripping texture, an M-LOK handguard, and a low-profile stock. It also features ambidextrous controls, making it perfect for all skirmishers!

Inside, we are equipped with a version 2 gearbox featuring 18:1 steel gears, a quick-change spring system, and the Ares EFCS MOSFET. This setup provides programmable fire controls via an Ares EFCS programming box (not included) and a low-voltage cutoff to protect your battery. It improves electrical efficiency and pairs perfectly with the pre-installed high-torque motor to provide a snappy trigger response in semi-auto, ideal for pumping out the suppressive fire. If you want a modern-looking rifle with a solid performance, the Secutor ASTRA IV Shadow M4 AEG is a superb option!

Tokyo Marui is known for its GBBR rifles, and for good reason! The ZET system is one of the most reliable gas systems out of the box, and provides a thunderous recoil that can only be described as wonderful. Any skirmisher who gets their hands on this superb rifle is sure to enjoy its realistic style and feel.

This Tokyo Marui rifle is based on the URG-I (Upper Receiver Group-Improved), a rifle that is used by many special forces groups across the world. It features an M-LOK style handguard as well as a special forces style four-prong flash hider. It's a great option for anyone looking to get into MilSim or interested in a military-inspired loadout.

The great thing about Tokyo Marui platforms is that there is no struggle finding after-market parts, not that you will need many aftermarket parts, because this rifle is built for performance and reliability. If you've been searching for that extra taste of realism from your Airsoft replicas, the Tokyo Marui URG-I 11.5" SOPMOD Block 3 ZET System GBBR is perfect for you!

The perfect BBs for CQB pistol, SMG and assault rifle users! These BBs are the midground between 0.2g and 0.25g, the most common BBs used for CQB. They come in a 1KG resealable bag, meaning you get roughly 4350 BBs in the bag. If you find your shots drop short with 0.25s but 0.2s don't give you enough power, you should definitely try these!

They are optimal for most CQB platforms as well as MOSCARTs and support gunners who don't care for the specifics of their BBs; they just want to shoot a lot at the enemy.

If you're eyeing up the PTS Syndicate Dead Air Wolverine Suppressor but your AK has 24mm CW barrel threads, this is the adapter you need! Made from CNC-machined aluminium to the high standards we expect from PTS Syndicate, the 24mm Thread Adaptor for Dead Air Wolverine Suppressor replaces the standard 14mm CCW rear cap of the Wolverine, allowing it to mount to 24mm CW male threading.

This ultra-thin Specna Arms 7.4V 1000mAh 30C Micro PEQ LiPo Battery is perfect for a PEQ box wired gun, such as the Specna Arms SA-H01. It can squeeze into some tight spots, but with its dimensions of 6.5x1x3.5cm, it will sadly not fit in PDW stocks but may fit in some SMG and AR36 handguards.

As it is a 7.4V LiPo, it is compatible with pretty much every Airsoft gun, and its Deans-style connector is optimal as most modern Airsoft guns are coming with Deans connectors installed due to its lower electrical resistance when compared with Tamiya connectors. If you need a teeny tiny battery for something, the Specna Arms 7.4V 1000mAh 30C Micro PEQ LiPo Battery; Deans could be your best shout!

If you're looking for a stylish stock for your AR buffer tube-equipped platform, the EMG DD Type Stock for M4/AR-15 is a fine choice! Supplied with an M4/AR-15 AEG buffer tube but compatible with any AR buffer tube-equipped platform, including GBBRs, this stock is styled after the real steel DD Tornado collapsible stock, perfect for any modern build. 

Like the real DD Tornado, the EMG replica includes rubber cheek rests on either side for a positively luxurious cheekweld, along with a serrated butt plate set at an angle ideal for use with body armour or tactical vests. The stock features an ambidextrous QD sling socket and conventional "footman loop" sling slots, ready for your sling setup of choice. 

Inside, the EMG DD Type Stock includes a battery compartment similarly sized to a Crane stock, ideal for crane/nunchuck batteries or accessory batteries for GBBR users. The compartment can be accessed by pressing the button marked "EMG" in the centre of the butt plate, after which the butt plate can be lifted free. The set also includes a 6-position M4/AR-15 AEG buffer tube made from aluminium with a steel castle nut, though you don't have to use this if your primary is already rocking an AR buffer tube. If you're after a modern stock with a stylish, premium look, the EMG DD Type Stock for M4/AR-15 belongs on your build!