NUPROL

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

If you need magazines but you also want to add a more modern look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 320 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see your BBs and with the dot texture, this mags gives a modern look to any Airsoft M4/AR15 AEG.

A retention holster designed to fit snugly WE Europe F226 Series Airsoft Pistols and can be attached to the users belt, and is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

A 9.9V LiFe (Lithium Iron Phosphate) battery for Airsoft, RC and other hobbies. Ideally suited to sit in a handguard or stock, this battery provides a higher voltage (and rate of fire) over standard Airsoft batteries.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

A replacement bulb cap, which is used to secure CO2 Bulbs in the bottom of WE EU Magazines and P&M Series Pistol Magazine. The cap is constructed from alloy, and is finished black, and features a large Allen Key hole in the bottom.

If you are looking for something cheap and cheerful that you can throw on for a bit of a plinking session, NUPROL has your back! The Protective Airsoft Safety Glasses are simple protective glasses available in either clear or light enhancing yellow tint, and come with their own carry case to keep the lenses scratch free in the kit bag. 

These glasses are rated EN166, providing the impact protection necessary to withstand direct BB hits at UK velocity levels and the lenses also have an anti-fog coating to keep your view of the target clear. 

If you are looking for something cheap and cheerful that you can throw on for a bit of a plinking session, NUPROL has your back! The Protective Airsoft Safety Glasses are simple protective glasses available in either clear or light enhancing yellow tint, and come with their own carry case to keep the lenses scratch free in the kit bag. 

These glasses are rated EN166, providing the impact protection necessary to withstand direct BB hits at UK velocity levels and the lenses also have an anti-fog coating to keep your view of the target clear. 

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

A Double Magazine Retention Pouch designed for WE Europe Airsoft 1911 Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible.

Do you want to cause problems at your local CQB site? There's no better way than with the Acetech AceHive Grenade! This compact area denial tool is compatible with 40mm MOSCART launchers, so you can give a nasty surprise to any skirmisher who enters your personal space. It holds 80 BBs, 10 in each tube. The clear polymer design allows you to keep an eye on your BBs so you can make sure this grenade is fully loaded to unleash the full wrath of this Grenade!

This grenade can be loaded using a speed loader straight into the holes at the top of the MOSCART. The brass gas fill valve is located on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. Once filled with BBs and gas, the grenade is now primed and ready. Once the steel knocker valve is pressed, it will unleash a massive shotgun-like spread of BBs, lots of fun for the user and terrifying for the unfortunate opponent!

The purple flashy colour is an excellent hint of style whilst you traverse the battlefield. The larger capacity is slightly longer but they are both compatible with 40mm grenade launchers such as an under-barrel launcher or "pocket rocket" style pistol. If you like to be a skirmish nuisance, the NUPROL 40mm MOSCART Gas Grenade is a great choice for you!

Do you want to cause problems at your local CQB site? There's no better way than with the Acetech AceHive Grenade! This compact area denial tool is compatible with 40mm MOSCART launchers, so you can give a nasty surprise to any skirmisher who enters your personal space. It holds 80 BBs, 10 in each tube. The clear polymer design allows you to keep an eye on your BBs so you can make sure this grenade is fully loaded to unleash the full wrath of this Grenade!

This grenade can be loaded using a speed loader straight into the holes at the top of the MOSCART. The brass gas fill valve is located on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. Once filled with BBs and gas, the grenade is now primed and ready. Once the steel knocker valve is pressed, it will unleash a massive shotgun-like spread of BBs, lots of fun for the user and terrifying for the unfortunate opponent!

The purple flashy colour is an excellent hint of style whilst you traverse the battlefield. The larger capacity is slightly longer but they are both compatible with 40mm grenade launchers such as an under-barrel launcher or "pocket rocket" style pistol. If you like to be a skirmish nuisance, the NUPROL 40mm MOSCART Gas Grenade is a great choice for you!

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

An 11.1v crane stock LiPo Battery with an impressive 2600mAh capacity, designed to ensure that your Airsoft AEG can survive a whole day of Skirmishing.

A mesh lower face mask for Airsoft use, which has fabric sides that wrap around a stock when shoulder your rifle, meaning no more struggling to get down as low as your sights.

A mesh lower face mask for Airsoft use, which has fabric sides that wrap around a stock when shoulder your rifle, meaning no more struggling to get down as low as your sights.

A mesh lower face mask for Airsoft use, which has fabric sides that wrap around a stock when shoulder your rifle, meaning no more struggling to get down as low as your sights.

A mesh lower face mask for Airsoft use, which has fabric sides that wrap around a stock when shoulder your rifle, meaning no more struggling to get down as low as your sights.

A humungous 7.4v LiPo battery in a Crane Stock / Nunchuck configuration which offers a massive 3000mAh capacity. If you want the biggest battery you can possibly squeeze into your replica, this is probably it!

An 11.1v 1200mAh 20c LiPo Battery with a Deans Connector in a Stick configuration, making it ideal for Solid Stocks and some rear wired Buffer Tubes. It has the following dimensions with a 9cm cable: 2cm x 1.63cm x 13cm.

Designed to be attached to Rigs, Vests, Carriers as well as Belts allowing you to conveniently carry around additional shells. This is a much neater way of getting shells rather than storing them loose in pockets or in admin pouches.

Ever heard of the MG36? Potentially not, as this support weapon version of the AR36 never made it past the prototype stage, though the elite German KSK has been sighted running a similar setup in the early 2000s in Afghanistan. The NUPROL 1200rnd Electric drum magazine allows you to add some serious MG36 like firepower to your AR36 platform AEG, and transform it to provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the all polymer, highly modern AR36 platform.

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines.