Guns Featuring RIS/RAS Rail

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

If your next build will be a beast of a DMR, the East Crane EC-903 SR-25 PC DMR AEG; Advanced Edition would make a fine base gun! Mechanically pre-locked to semi-automatic only and equipped with internals ideal for DMR conversion, the EC-903 boasts full metal construction and fantastic attention to detail, inspired by the most recent SR-25 DMR variant, known as the SR-25 PC (Precision Carbine).

On the outside, the EC-903 Advanced is rocking a CNC aluminium URX4-style M-LOK handguard, KAC-inspired QDC flash hider and ambidextrous 20mm Picatinny railed receiver, QD sling sockets throughout the build and an AR-15 AEG spec buffer tube at the rear, pre-fitted with a high quality Crane stock replica. Inside, we're treated to the Version 2 long gearbox, featuring a long polymer piston with a full steel tooth rack, long type 0 cylinder, 18:1 steel gears running on 8mm ball-bearing bushings and a quick change spring guide for easy power tuning. The inner barrel is also a 6.04mm tightbore, offering enhanced accuracy and a slight FPS boost from the same strength spring.

If your DMR build needs to be modern, metal and menacing, the EC-903 SR-25 PC DMR AEG; Advanced Edition from East Crane is the way to go! With the prerequisite .308 style DMR looks to set it apart from standard AR-15s, modern furniture ready to be customised and internals with plenty of pre-upgrades thrown in, the EC-903 is ready to harass the enemy team at long-range!

A Gas Blowback Airsoft Pistol designed by WE designed with an ergonomic grip giving you a strong hold on your pistol during use.

A Gas Blowback 6mm BB Airsoft Pistol, designed and based off the M1911 Pistol which was modified by the US Army and is in use today. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine with a Rubberised Grip.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

If you're looking for an affordable beginner platform with solid out-of-the-box performance and plenty of upgrade potential, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will suit you well! Made predominantly from high density polymer with an alloy outer barrel and steel trim parts, the SA-F01 FLEX™ is all about agility, tipping the scales at a mere 1.95KG, ideal for younger skirmishers and those who like to move fast!

Inside, the SA-F01 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F01, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you're an experienced skirmisher seeking a lightweight backup or loaner AEG, or you're fresh to the sport looking for a future-proofed, reliable and versatile starter platform, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will serve you well!

If you're looking for an affordable beginner platform with solid out-of-the-box performance and plenty of upgrade potential, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will suit you well! Made predominantly from high density polymer with an alloy outer barrel and steel trim parts, the SA-F01 FLEX™ is all about agility, tipping the scales at a mere 1.95KG, ideal for younger skirmishers and those who like to move fast!

Inside, the SA-F01 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F01, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you're an experienced skirmisher seeking a lightweight backup or loaner AEG, or you're fresh to the sport looking for a future-proofed, reliable and versatile starter platform, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will serve you well!

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

If you have a thing for modernised American AKs, this one should be up your street! The EMG Rifle Dynamics RD-701 AEG; Kestrel Basic ETU is absolutely packed with pre-upgraded internal parts and boasts licensed trademarks from Rifle Dynamics with detailed replica Rifle Dynamics parts across the design. Boasting some incredible pre-upgraded parts from the CYMA Platinum Edition rifles, this AK variant is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-701's other upgraded parts and flawless build quality. The RD-701 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

so, if you fancy treating yourself to an AK platform, the EMG Rifle Dynamics RD-701 AEG is a great high-performance option, plus, its party trick of lighting up tracer BBs without an aftermarket tracer unit required!

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If you have seen the impressive performance of the EU series of GBB pistols, but you have also seen the way they look and you aren't a fan, Double Eagle has something you may appreciate! The Double Eagle JDG Polymer 80 PFS9 GBB pistol takes the superb EU series internals and puts them inside a slide and frame with a dynamic modern look. The PFS9 sports an aggressively textured pistol grip, a 20mm Picatinny frame rail, an optics ready slide and an 11mm CW threaded barrel, making the pistol ready for any task you set for it. This GBB pistol is based on the real PFS9 which is quickly rising in popularity in the US, and its redesigned "Polymer 80" frame.

If you love the 9mm AR aesthetic and require an ultra-strong yet lightweight build, the Evolution Reaper S EMR AR-9 AEG; ETS II ETU should be right up your street! Constructed with a unique receiver design using Evolution's proprietary Carbontech™ engineering polymer, a CNC aluminium handguard and a CNC aluminium buffer tube, the Reaper S EMR keeps overall weight to a minimum without compromising when it comes to quality!

Inside, the Reaper S EMR is well equipped; rocking a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick change spring guide and a sector gear delayer to maintain reliable feeding at high speed. Also inside is a 6.01mm tightbore inner barrel which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

Whether you vibe with the looks of real steel high-speed PCC setups or you need a platform which handles flawlessly with top-notch build quality, solid internals and low overall weight, the Evolution Reaper S EMR AR-9 AEG; ETS II ETU fits the bill better than most!

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

Where my milsim bois at? The East Crane EC-202 M-417 DMR is the marksman rifle you have been looking for, whether you run a UKSF, Delta or any other SF loadout! Boasting full metal construction, a quick change spring system and a programmable MOSFET capable of semi-automatic only, the EC-202 is ready for whatever role you place it in, but we think it would make a beast of a DMR!

With a 6.04mm Tightbore inner barrel, rotary HOP-up unit, version 2.5/version 2 long gearbox and CHONKY 7.62x51mm style magazines, the EC-202 is kitted out for long range skirmishing, whether you push it up to DMR limits or not. On the outside, we have more 20mm Picatinny rails than we will ever need, a 14mm CCW male threaded barrel, ready for a suppressor or tracer and a snag-reducing low-profile stock with full adjustability for ease of movement. Wack a big scope on this bad boy and get to work!

If you value realism and need a compact AR platform which is built like and tank with top-tier performance, you're looking for a KRYTAC EMG BARRETT REC7 MK3 SBR AEG! The latest version of KRYTAC's stunning REC7 platform, the MK3 boasts the same ever-impressive externals as the original with further internal improvements to squeeze a bit more performance out of this already beastly build!

*Note that this platform is not provided with the optic shown in the example images

If you like an aggressive military-style AR, the CYMA CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.04mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

If you like an aggressive military-style AR with real steal trademarks, the CYMA COLT CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.03mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

Those looking for a lightweight backup weapon with fully fledged special forces style looks you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real world platform we all know and love, and that is widely issued to special forces of almost every nation in some form.

The ST46 is constructed almost entirely from high density polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. High density polymer may be less realistic, but it will not show damage as readily as a full metal gun might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. If you need a lightweight solution, either as a primary or a backup, the ST46 is the perfect thing!

The MK18 SA-E19 EDGE is an EDGE Series replica from Specna Arms, that comes included with a fully licensed Daniel Defense 20mm Rail System, as seen on the MK18, everyone's Special Forces AR of choice. Being an EDGE Series replica, it also comes packaged with the Gate X-ASR MOSFET, Quick Change Spring System, Rotary Hop Unit, 6.03mm Inner Barrel, Unique Serial Number and awesome Zinc Aluminium, Steel and Polymer externals.

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.

If you have your snappy suit ready and you now need a sidearm, the TTI JW4 Pit Viper from Army Armament is a perfect match! This cutting edge new Hi-capa variant is the star of the show in John Wick: Chapter 4 and is kitted out exactly how it is in the movie, with a built-in compensator, light-enhancing iron sights and a flared magazine well for fast target acquisition and speedy reloads!

Boasting full metal construction, Hi-capa GBB magazine compatibility and extended and enhanced controls, you would be hard-pressed to build a Hi-capa with a more modern feature set than this! If you are a fan of the John Wick franchise or you are simply looking for an up-to-date combat-optimised Hi-capa platform, the JW4 is as slick as they come!

If you're just getting started on your Airsoft journey and don't want to get in too deep straight away, the CYMA CM.517 M4 Combat Machine AEG is a fine choice. This battery-powered Airsoft AEG is constructed almost entirely from high-density ABS polymer with an alloy outer barrel and alloy version 2 gearbox, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.517 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.517 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.517 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with an affordable, reliable and competitive platform for a great price, the CYMA CM.517 M4 Combat Machine AEG is a fantastic choice!

Designed to give new players everything they need to compete on the field in a lightweight, affordable package, the Nuprol Pioneer Defender AEG has established a reputation for being one of the best options for a newcomer to the sport. Out of the box, the Defender is very well equipped; boasting a 6.03 tight bore inner barrel for accuracy, a microswitch trigger for impressive trigger response, and a high torque motor to keep the reinforced gearbox running smoothly and quickly with superb long term reliability. 

Once you have got your eye in and get more of a taste for the sport, the Defender can be customized into practically whatever AR15 variant you like, sporting full compatibility with AEG aftermarket external upgrades. A perfect choice for the new Airsofter who wants to get out and shoot, but doesn't want any surprises or regrets down the line!

A Gas Blowback Airsoft Pistol manufactured and built by NUPROL as part of their RAVEN EU G-Series Pistol Range. This variant of the pistol features a semi and fully automatic firing system, allowing you to go all out on the enemy team right when you need it.

This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment. This pistol is also very customisable, giving you plenty of aftermarket options when it comes to upgrades and accessories allowing you to make the pistol your own.

If you're looking to get into the sport and get skirmishing on the cheap, the CYMA CM.515 AR-15 Carbine AEG is a fantastic option with uniquely modern styling! With nifty features such as KeyMod Style handguard with pre-installed 20mm Picatinny rail sections and 20mm Picatinny receiver rail ready for your choice of optical sight, the CM.515 takes commonly available and cheap M4 AEG magazines and is already equipped with a 6.03mm tightbore inner barrel for extra accuracy. Hard to believe at this price, right? Well, you better start believing in cheap M4s with tightbore inner barrels, you're looking at one!

The alloy version 2 gearbox the CM.515 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms when paired with the pre-upgraded 6.03mm tightbore inner barrel. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

This is the perfect AEG for any player looking to start their Airsoft journey with a budget-friendly AEG rifle that has no trouble competing either in CQB or in the wide spaces of outdoor sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to customise your CM.515 and make it truly yours. Whether this is your first foray into the world of Airsoft or you are looking for a cheap project gun, we are sure you will be impressed with your CYMA CM.515 AR-15 Carbine AEG!

If you love the performance of the original AAP-01 Assassin but didn't get on with the looks, the AAP-01C "Shinobi" could be the AAP for you. This compact AAP-01 variant has an aggressive new look, with a snub-nosed front end and loads of accessory rails, but retains the supreme gas efficiency, rate of fire and upgradability that put the original on the map.

Constructed from high density polymer with a redesigned fire selector which is easier to use than ever before, the AAP-01C has refined the AAP-01 platform with the addition of built-in 20mm Picatinny rails on both the receiver and compensator, making it ready to rock and roll with a red dot and tactical flashlight; a game-winning combo in CQB scenarios. If you are keeping your eye out for a lightweight, performance-oriented platform which excels in all environments and won't stop performing when the weather gets chilly the AAP-01C Shinobi is one to watch!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!