Refine results
Refine by
Viewing 30 of 33.
grid
list
35.49
  • 500 Lumens output
  • Includes pressure switch & push button tail caps
  • Supplied with a 20mm Picatinny mount

If you play a lot of CQB, a tactical flashlight will be an asset to your setup. The Delta Armory Defender Shield Tactical Flashlight is a highly flexible unit capable of being used as a handheld light or weapon light, packaged with a pressure switch tail cap and equipped with a push button tail cap as it comes. Also included is a 20mm Picatinny ring mount to allow you to mount it to your primary and a lanyard so you can carry it as a handheld light and avoid dropping it in wet weather.

The Defender Shield is powered by the included rechargeable18650 Lithium battery but the charger is not included. Compatible chargers can be found by putting "18650 Battery Charger" into your favourite search engine. If you're kitting out your primary for CQB or night skirmishes you need this on your primary!

70.49
  • Aluminium construction
  • Powered by 2 x CR123A cells
  • 600 Lumens output - dazzling!

If you need a compact tactical flashlight for your pistol, SMG or short-barreled rifle, check out the OPSMEN Fast 402 Ultra Weapon Light! This tactical flashlight is constructed from 6061 aviation-grade aluminium alloy and boasts an integral 20mm Picatinny rail mount and a built-in multi-function switch.

The Fast 402 outputs a maximum of 600 Lumens with a 150-meter beam throw, making it bright enough to dazzle the enemy when you breach a room in CQB with enough range to illuminate targets at longer ranges. Its robust construction grants the Fast 402 recoil resistance, 1.5m impact resistance and IPX7 water and dust resistance, ensuring it is battle-ready, even mounted on a heavy recoiling GBBR. If you're looking for an affordable tactical flashlight which is more robust than the average, the Fast 402 is what you need!

7.49
  • Compact helmet light
  • Red flash function
  • Fits to helmets, hats or rigs via Velcro

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

7.49
  • Compact helmet light
  • Red flash function
  • Fits to helmets, hats or rigs via Velcro

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

11.99
  • Replaces Button
  • Tail Switch Addon
  • For Big Dragon T6 Torch

A Tail Switch unit designed to replace the existing Push button on the back of Big Dragon SF G2 Style T6 Torches. The tail switch is constructed from polymer with a Soft Rubber coated tail switch. 

15.49
  • Velcro Backing
  • Fits into MOLLE
  • Waterproof Design

A small LED powered Light designed for use as a marking device to donate Locations and Team Colours for Identification. The Body of the Light is constructed from Polymer, with a Gel encased LED Light, making it waterproof.

19.99
  • 500 Lumens LED
  • 30mm Body Width
  • Uses CR123 Battery

A lightweight torch designed to be used in dark conditions to spot targets, cause distractions and temporarily blind your opponents.

19.99
  • Rubber pressure switch
  • Attaches to Picatinny rail
  • M-LOK rail mount

WADSN are considered by many to be the gold standard in terms of torches and switches with this modbutton being no exception. The pressure switch is used for remote activation of a flashlight and is constructed from rubber for a tactile feel. The housing attaches easily to a Picatinny rail system, however if you would prefer to attach it to an M-LOK system, WADSN have fortunately included an adaptor, giving you that option.

37.49
  • Wireless charging
  • 4 Colour LEDs
  • Velcro and MOLLE mount included

If you are looking for that last small item to give your helmet/kit setup some added flair, check out the Signal light from FMA. This light can be attached to either velcro or a MOLLE rig and comes complete with a wireless charging kit, MOLLE mount, helmet mount and Velcro.

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

42.49
  • Full metal construction
  • SF "Scout" style tactical flashlight - Short
  • Integrated 20mm Picatinny rail mount

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

42.49
  • Full metal construction
  • SF "Scout" style tactical flashlight - Short
  • Integrated 20mm Picatinny rail mount

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

46.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

46.99
  • Navigation light - Read maps / intel in low light
  • Red / Blue / Green / White / IR L.E.Ds inside
  • Mounts to ARC rails, Helmet Velcro or MOLLE

If you need to see your way around a dark skirmish site or read a map during a night game without giving away your location, the Sidewinder Stalk Navigation light is the right tool for the job. This light provides soft light so you can navigate without lighting the whole site up and offers you the option of using red, blue, green or white light in 3 different intensity levels, as well as a flash mode for signalling.

Supplied with a mount for ARC rails, velcro and MOLLE, the WADSN Sidewinder can be mounted wherever you like and can be quickly removed and remounted should the need arise. If you are working on a helmet build and need some fancy bits to make it pop, the Sidewinder Stalk Helmet/MOLLE Navigation Light would be the perfect finishing touch!

52.99
  • 500 Lumens output
  • Integral 20mm Picatinny rail mount
  • Constant on push button tail cap

If you are in need of a compact tactical flashlight for a short-barreled rifle or SMG setup an M300 pattern light is one of the best options out there. This variant, the WADSN M300 Scout Tactical Flashlight w/Diffuser Cover uses an M300 light body coupled with a specialised head with a built-in diffuser cover which can be quickly flipped out of the way when not needed.

The diffuser is designed to spread the light throw out to more effectively distract and disorient enemy players when entering a room and flipping it aside will narrow the beam for long range engagements. Being based on an M300 scout light body means you can use alternative scout light mounts, tail caps and other scout light accessories to set it up to suit you perfectly.

56.49
  • Full metal construction
  • Bright CREE LED
  • Integral 20mm Picatinny rail mount 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

64.49
  • Fibre-reinforced polymer construction
  • 220 Lumens output with Strobe
  • Integrated mount and pressure switch

If you are looking for a lightweight and compact tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

70.49
  • Fibre-reinforced polymer construction
  • 220 Lumens output with Strobe
  • Integrated mount and pressure switch

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

70.49
  • 150m maximum distance
  • 800 lumens
  • Aluminium build

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

75.99
  • 200 Lumens CREE LED 
  • Ambidextrous rocker switch
  • Alloy construction with polymer parts

If you want to add a tactical flashlight to your Airsoft pistol, the NUPROL NX200 would be a fine choice. The NX200 is constructed from alloy, and sports a bright CREE LED with 200 Lumens output. 

The NX200 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters. The rocker switch is placed perfectly to be activated with either the tip of your trigger finger, or your reaction hand thumb, making the NX200 remarkably intuitive to use, and easy to become proficient with. If you want to take your pistol game to the next level, the NX200 will get you there! 

Please Note: The Colour of the bronze variant has changed in our most recent batch, it is now much lighter than the images show. Please refer to the colour swatch in the "Specification" section for a more accurate representation of the new "Light Bronze" finish. Product Images will be updated shortly. 

75.99
  • Dual function tail cap
  • CRE2 LED bulb
  • Offset Picatinny mount

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

81.99
  • Rail Mounted
  • Pressure Pad Included
  • Torch, Laser and IR Combo

A replica PEQ-15 device from Nuprol that provides torch illumination, a visible red laser pointer and IR laser pointer - all in one compact package!

81.99
  • Rail Mounted
  • Pressure Pad Included
  • Torch, Laser and IR Combo

A replica PEQ-15 device from Nuprol that provides torch illumination, a visible red laser pointer and IR laser pointer - all in one compact package!

81.99
  • Ultra-Low Profile
  • Alloy Construction
  • Momentary and constant On/Off Switch

For those looking for the ultimate low profile pistol torch, stop searching! You've found it, powered by a single AAA battery you can dazzle your targets for hours without having excessive weight and bulk at the front of your Airsoft pistol.

93.49
  • 300 Lumens CREE LED 
  • Ambidextrous rocker switch
  • Alloy construction with polymer parts

Having a tactical flashlight mounted on your Airsoft pistol is a great way to gain the upper hand in dark and challenging CQB sites. Tactical flashlights can be used to navigate, and also to disorient the enemy team as you breach a room. The NUPROL NX300 is constructed from alloy, and sports a bright CREE LED with 300 Lumens output. The NX300 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters.

This flashlight is designed to present a switch on either side of the trigger guard of a pistol, but can also be mounted on an Airsoft rifle with a short front end and provide ambidextrous activation for those who like to switch shoulders to make the most of cover when things get up close and personal.

93.49
  • 300 Lumens CREE LED 
  • Ambidextrous rocker switch
  • Alloy construction with polymer parts

Having a tactical flashlight mounted on your Airsoft pistol is a great way to gain the upper hand in dark and challenging CQB sites. Tactical flashlights can be used to navigate, and also to disorient the enemy team as you breach a room. The NUPROL NX300 is constructed from alloy, and sports a bright CREE LED with 300 Lumens output. The NX300 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters.

This flashlight is designed to present a switch on either side of the trigger guard of a pistol, but can also be mounted on an Airsoft rifle with a short front end and provide ambidextrous activation for those who like to switch shoulders to make the most of cover when things get up close and personal.

Light up your targets and make them easier to see

Here at Patrol Base we have a wide variety of torches and lights designed to aid aiming in dark conditions usually found in CQB environments.

We have a selection of torches, both hand held and weapon mounted, from a selection of the top brands such as Klarus, ASG, NcStar, all tested by our team of experts. And if you need somewhere to attach your torch, browse our handy KeyMod and rail handguards or M-LOK and KeyMod rails for Airsoft guns!

If you can't find something that you like, or want something which isn't on the website why not contact us via Phone and we can do our best to source it for you!
Telephone: 01484 644709