Viewing 30 of 53.
grid
list
13.49
  • High density polymer construction
  • 20mm Picatinny rails at 3, 6, 9 and 12 o'clock
  • For AK-47/74 AEG and GBBR assault rifles

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

47.99
  • CNC Aluminium construction
  • M-LOK & 20mm Picatinny interfaces
  • Compatible with M4/AR-15 platforms

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

The Strike handguard also comes with an angled foregrip pre-installed on the 6 o'clock M-LOK slots which can be removed and repositioned wherever you prefer. Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip will do the trick!

41.99
  • M-LOK mounting surfaces 
  • Weighs less than a bag of crisps
  • Choose between SMG-5 or SMG-5K variants


Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

53.99
  • M-LOK mounting surfaces 
  • Weighs less than a bag of crisps
  • Choose between SMG-5 or SMG-5K variants


Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

86.27
Was 101.49
Save 15.22
  • CNC Aluminium construction
  • M-LOK handguard for M4/AR-15
  • Slimline design - Very ergonomic

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

91.37
Was 107.49
Save 16.12
  • CNC Aluminium construction
  • M-LOK handguard for M4/AR-15
  • Slimline design - Very ergonomic

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

11.99
  • High density polymer construction
  • Quad rail handguard - FF RIS style
  • Compatible with most M4/AR-15 replicas

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

15.49
  • High density polymer construction
  • Quad rail handguard - FF RIS style
  • Compatible with most M4/AR-15 replicas

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

47.99
  • 20mm Rail system
  • Includes metal outer barrel 
  • Includes 2x Rail cover and VFG

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

25.49
Was 29.99
Save 4.50
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

28.99
Was 33.49
Save 4.50
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

32.49
Was 36.99
Save 4.50
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

35.99
Was 40.99
Save 5.00
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

39.49
Was 44.49
Save 5.00
  • CNC aluminium construction
  • 20mm Picatinny top rail, KeyMod sides and bottom
  • Compatible with M4/AR15 AEG and GBBR

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

71.99
  • Four-Point RIS
  • Fits AEG & GBB
  • MK18 Handguard

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

53.99
  • Lightweight design
  • CNC Machined Aluminium
  • Compatible with AKS-74U Krinkov

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

65.99
  • CNC Aluminium construction
  • Includes 9.3cm outer barrel extension
  • For VFC/Cybergun SCAR-L/H, DBoys SCAR-H and Double Bell SCAR-H AEGs

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

83.49
  • CNC Aluminium construction
  • Includes 9.3cm outer barrel extension
  • For VFC/Cybergun SCAR-L/H, DBoys SCAR-H and Double Bell SCAR-H AEGs

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

3.99
  • Replacement original part
  • Steel construction
  • For AK-47/74 AEG rifles

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

11.99
  • For AK Models
  • Alloy Construction
  • Original Replacement

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

15.49
  • High density polymer construction
  • Includes 2 x Rail covers
  • Handguard for M4/AR-15 Delta Rings

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

7.49
  • High density polymer construction
  • For M4/AR-15 Delta Rings
  • Two-piece ribbed M4A1 handguards

If you're working on a classic M4A1 build or you broke your handguards and need cheap replacements, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are ideal. These handguards are constructed from high density polymer with the classic M4A1 ribbed design and a slightly wider profile than XM177 handguards. 

These are two-piece handguards designed to mount to M4/AR-15 delta rings found on M4A1, XM177, CQBR and other classic M4 configurations. If you aren't sure if these handguards are right for your AR, contact us for clarification. Ideal for lightweight builds or the retro aesthetic, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are affordable and functional!

17.99
  • High density polymer construction
  • Removable 20mm Picatinny rail sections
  • Compatible with most M4/AR-15 replicas

If you're seeking a lightweight handguard for your sleeper build, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 is a fine choice. This handguard is styled after the real steel URX 3 handguard and is constructed from high-density polymer, keeping the price and weight to a minimum.

Known as a "mock KeyMod" handguard, the attachment slots on this handguard are not compatible with most KeyMod accessories though you do have the option of mounting 20mm Picatinny accessories to the included rail sections. 3 Rail sections are included and pre-installed but can be repositioned wherever you need them on the attachment slots at 3, 6 and 9 o'clock.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you want the style of a modern KeyMod handguard but not the weight, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 should fit the bill!

178.99
  • CNC Aluminium construction
  • Handguard, suppressor & barrel for SUR300
  • Compatible with SigAir MCX Virtus AEG

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

178.99
  • CNC Aluminium construction
  • Handguard, suppressor & barrel for SUR300
  • Compatible with SigAir MCX Virtus AEG

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

21.49
  • Aluminium construction
  • Holds your battery inside the handguard
  • For Sig Air MPX Submachine Gun AEG

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

101.49
  • Aluminium construction
  • 20mm Picatinny and KeyMod 
  • Modular construction - Various configurations possible

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

71.99
  • M-LOK Handguard, outer & inner barrel set
  • Compatible with Novritsch SSR63 A2 and SSR63 A3
  • Perfect for CQB and aggressive skirmishers

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

143.49
  • CNC Aluminium construction
  • Compatible with M4/AR-15 AEG, GBBR & PTW
  • Complete your British Army KS-1/L403A1 build!

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

41.99
  • CNC Aluminium construction
  • KeyMod & 20mm Picatinny interfaces
  • Compatible with M4/AR-15 platforms

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

About Our Airsoft Handguards

Looking for something to make your airsoft gun look a little different? We have a range of airsoft handguards and airsoft rail systems designed for both looks and functionality. Explore parts ideal for tactical upgrades, as well as visual upgrades for those who are all about standing out from the crowd.

Whether you’re looking for a new M4 handguard, or maybe a rail handguard for your AK rifle, you’ll find it with us. We stock a range of handguards that are perfect for maximising comfort and grip. Or for increased practicality, opt for a KeyMod or rail handguard to mount airsoft attachments like red dot sights or torches. That way you’ll utilise every inch of your weapon..

Shop KeyMod handguards and more online today for next day delivery. Want to try out your new airsoft handguard or rail system in person? No problem! Head down to our Huddersfield store, complete with its own dedicated airsoft range!