All External Airsoft Parts & Attachments

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

A replacement grip for AK platform series GBB rifles, giving you a larger surface area to hold onto and better weapons handling.

If you've damaged the stock of your CYMA CM.103 AK Alfa, here's what you need to fix it! The CYMA Stock for CM.103 AK Alfa AEG is a replacement original parts set for the CYMA Platinum CM.103, a complete stock setup identical to the one pre-installed on the AK Alfa. This stock boasts 6 length of pull adjustment positions, 4 cheek riser positions and side folding functionality but is only compatible with the CYMA Platinum CM.103 AK Alfa AEG. 

An original replacement for the handguard of an LCT branded LCKM, which is made with Real Wood and Steel, and comes included with the Gas Tube. The part is easy to install, and is made to the same specification as the original part. This is the ideal purchase to replace your LCT LCKM handguard or convert another AKM series model.

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

This stupendously massive and imposing Suppressor is designed for AK replicas with a 24mm CW Thread, and is crafted from Aluminium 6061 and Steel to the usual high standard that LCT pride themselves on. Also featuring a spring-loaded Inner Barrel Extension, this is the Suppressor for you if you want to stand out anywhere.

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!

For those looking for a more realistic handling experience from their Hi-capa 4.3, Airsoft Masterpiece has come through again, this time with a steel outer barrel complete with 11mm CW female threads! This outer barrel is constructed entirely from steel, and is immaculately finished down to each dummy locking ridge and the .45 ACP engraving on the chamber. Adding a steel barrel can alter your pistols handling characteristics considerably, raising the point of balance and making it feel more like a real firearm.

A Steel constructed replacement Receiver & Folding Stock for the LCT M70AB2 Airsoft Electric Gun, which features a Stamped Steel receiver and Steel Underfolder Stock, complete with Sling Loop.

Airsoft Masterpiece brings its unparalleled pedigree to Hi-Capa frames to upgrade your pistol and take it from good to next level! The frame is constructed from CNC machined aluminium, which not only looks fantastic but weighs a mere 86g, making your pistol as light as a feather and handle like a dream.

Available in a variety of metallic colours to give your Hi-Capa a sleek, ultra-modern look that's sure to stand out from the crowd. This kit comes included with hammer housing and advanced sear, which allows for smoother cycling and cleaner trigger feel in comparison to the stock Hi-Capa kit.

Installing an Airsoft Masterpiece frame will let your Hi-Capa run as smooth as butter and look even better, while also increasing durability and overall lifespan. Available in a variety of colours.

What better way to finish of a capa, then with an Aluminium Grip!

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip!

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A 12mm to 14mm CCW thread adapter which will allow you to attach suppressors to your Raven only series gas blowback pistol.

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you're in the market for a micro tracer unit but you want muzzle flash, the Eshooter FLARE M Tracer Unit with Muzzle Flash is your best bet. This ultra-compact tracer unit rivals the smallest on the market, measuring approximately 5.4cm long with a 2.8cm diameter and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE M is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE M is intended to be mounted on 14mm CCW male threaded outer barrels and includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCWadapter to mount the Flare M. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter and you can rock the FLARE M too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE M charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE M is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.