Search results for 'emersongear'

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

The ultimate compact and modular rig, which allows you to quickly adapt all aspects of your platform depending on the mission at hand. Do you want to be more lightweight and have less clutter on your rig during the day? This Micro Chest Rig Platform is the answer.

If you need some summer headwear for Airsoft, a boonie hat would be a great choice. The EmersonGear Ripstop Boonie Hat is constructed from cotton and ripstop polyester in a 50/50 mix which should give it a longer life thanks to the robust ripstop design. The hat is fully adjustable for head size via the toggle on the rear, meaning it will fit most adult head sizes (up to 62cm diameter).

As a part of the classic boonie design, the EmersionGear hat has foliage loops, also known as "branch loops" sewn in around the brim of the hat. This allows you to attach natural foliage similarly to a concealment vest and disguise your head for woodland skirmishes. Just above the branch loops, there are ventilation ports to allow for more airflow under the hat and prevent overheating in high temperatures. There is also a small Velcro patch on the top for an ID or morale patch, but if you are really milsim you can mount a HELSTAR 6 or other ID marker light. Keep your head fresh during summer skirmishes while also keeping the tactical look!

A replica EXF helmet, designed to act and function just like the real thing. 

The EMERSONGEAR Modular Detachable Back Panel is designed for the 420 Plate Carrier, and will replace the rear MOLLE Panel on the back of the Rig to provide more storage. The Pouch features a moderately sized Backpack, ideal for Hydration Bladders, as well as a medium sized Zipped Pocket and four Grenade Pouches, mounted horizontally for easy reach. If you own an EMERSONGEAR 420 Plate Carrier and want to enhance it's carrying capability in style, then the Modular Back Panel is an absolute must.

The EMERSONGEAR Modular Detachable Back Panel is designed for the 420 Plate Carrier, and will replace the rear MOLLE Panel on the back of the Rig to provide more storage. The Pouch features a moderately sized Backpack, ideal for Hydration Bladders, as well as a medium sized Zipped Pocket and four Grenade Pouches, mounted horizontally for easy reach. If you own an EMERSONGEAR 420 Plate Carrier and want to enhance it's carrying capability in style, then the Modular Back Panel is an absolute must.

The latest combat uniform trousers to come from EMERSONGEAR, and aims to update their uniform to keep up to date with current spec in the real world.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A tough and durable Load Bearing Utility Belt made from high-quality 1000D Nylon and fully adjustable to make it comfortable and practical for any shape or size of Airsofter. Transfer your pouches to your waist and dramatically improve your operational efficiency by clearing space on your torso/chest.

A Nylon constructed Competition Belt for IPSC / 3 Gun shooters who need their equipment to be as dynamic, reliable and tough as them when it comes time for action.

A patch which is designed to be attached to Velcro panels on Rigs, Shirts and Bags which lets players know that you are the team medic. 

A patch which is designed to be attached to Velcro panels on Rigs, Shirts and Bags which lets players know that you are the team medic. 

The Single point bungee sling from EmersonGear proves an effective solution to the problem of what to do with your primary when it's sidearm time. Hook this sling up, and you can simply throw your rifle to your side, draw your pistol and get busy! This sling is constructed from durable nylon with a bungee section which reduces fatigue and strain on your sling point and attaches to your primary using a single alloy hook/clasp. This sling is perfect to take the weight off your arms during a long skirmish, and prevent those with butter fingers from dropping their precious rifles!

The Single point bungee sling from EmersonGear proves an effective solution to the problem of what to do with your primary when it's sidearm time. Hook this sling up, and you can simply throw your rifle to your side, draw your pistol and get busy! This sling is constructed from durable nylon with a bungee section which reduces fatigue and strain on your sling point and attaches to your primary using a single alloy hook/clasp. This sling is perfect to take the weight off your arms during a long skirmish, and prevent those with butter fingers from dropping their precious rifles!

A pouch designed to allow you to evenly distribute the weight of your helmet mounted equipment and reduce strain on your neck. This pouch is used as a counter weight to any objects mounted to the front of your Helmet, such as Cameras, Flash Lights, Goggles or Night Vision Equipment.

Too hot for a helmet? A tactical baseball cap can be a great alternative for summer skirmishes, allowing you to keep your most important piece of equipment, your brain, cool and ready for action! The Emerson Tactical Assaulter Mesh Cap is constructed from Ripstop fabric with a mesh rear, providing excellent air flow and keeping you cool and comfortable. The cap also sports Velcro for patches at the front, top and rear, meaning you still have space for your I.D and morale patches and can keep the cap in keeping with your loadout. This cap has an elasticated headband and should fit most adult wearers with a head circumference above 55cm.

If you need to carry more mags but don't want to waste space on your rig, this pouch is ideal! The EmersonGear Versatile Combo mag pouch is designed to house one rifle magazine and one pistol magazine, and thanks to its adjustable design, can fit almost any rifle or pistol mag out there. This is achieved via the adjustable bungee cord retention on the rear which allows both the rifle and pistol magazine pouch to be adjusted to fit larger magazines or to customise the retention force to suit your playstyle.

The pouch mounts to MOLLE webbing commonly found on belts, tactical vests and backpacks via the pair of MOLLE hooks on the rear. Being a stacked magazine pouch, this pouch has the benefit of taking up less MOLLE space than two separate pouches but also encourages intuitive reloads as you will always be reaching for the same location on your rig, whether you are reloading a pistol or rifle. If you use a wide range of different platforms when you skirmish and want one pouch to fit them all, this is the one to go for!

A lightweight, low profile, foam filled mock Plate Carrier from EmersonGear. If you're a player who likes to keep things simple but effective, this PC might be for you. 

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight cover for FAST helmets, allowing you to quickly and easily change the camo pattern of your helmet with minimal effort.

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!