Airsoft Boneyard

This replica has landed in our boneyard due to being ex-display; par from a few signs of use (especially on the bipod and bolt), the replica is fully functional. Firing through our chronograph, we were seeing 380 FPS on .2 BB's so quite respectable for a sniper platform of this price range but could use a spring upgrade to get it closer to sniper levels of power output. Regardless, this is a steal for a fully functional replica that has all of its original components.

This suppressor once contained a tracer unit and had a tank for mist functionality, but these have both been removed. It is now just a stylish suppressor with a lack of bells and whistles, but it's ready to be the bell or whistle to add to your primary platform!

Some residue of mist fluid from its past days may be found internally, and slight cosmetic damage can be seen externally, but overall it is clean, gutted of its old internals and has a perfectly good thread ready to meet the one on the end of your barrel.

There are multiple of this item in stock - Please note that because of this there are differing external damage examples between them including slightly loose bases and cracked tracer caps etc..

This replica has landed in our boneyard due missing a magazine - other than this the replica is in quite decent condition. Due to missing a magazine, we're unable to test for any faults alongside seeing what this replica fires at through our chronograph so further investigation would be required to route out any potential issues.

This replica has found its way into the boneyard due to a leaky magazine - we cannot determine whereabouts it's leaking from due to the nature of CO2 but we can only presume it's leaking from the chamber where the bulb seals in or the knocker valve as this is the typical spot where CO2 magazines leak due to lack of lubrication.

Other than this, there is no other reported faults but since we cannot test the replica due to requiring a functioning magazine, we cannot verify if there is indeed no faults so further investigation is required. The replica is in good condition too so TLC isn't really required.

This sniper rifle has landed in our boneyard due to the bipod spigot and mount being detached from the rifle and the bipod itself absent completely. Aside from this, the rifle is in functional condition and works fine, making it a great bargain buy if you fancy trying some sniping gameplay on skirmish day.

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This SSE18 AEP is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use on the platform. The battery and charger originally provided with the pistol are also missing, so some fresh ones of those will be needed to get shooting.

For a detailed description and specifications of the original product, click here!

This replica has landed in our boneyard due to it slam firing - this could either be the sear or piston causing the issue so some further investigation will be required into the root of this fault. The bolt handle lock is missing, so regardless of if the handle is up or down, it'll fire when you let go. It must also be mentioned t hat the scope, bipod, and one of the three magazines originally provided with this platform are missing, so replacements will need sourcing if you're wanting a full setup.

"faulty cylinder head"

If you're after a good starter sniping platform and want to get into tinkering - this boneyard may be the one for you. As far as we know, there is an issue with the cylinder head alongside some other issues which we cannot determine that is preventing the replica from cocking; as soon as you pull back the bolt, it sounds like the replica fires so this ultimately would require some investigation work. The paint externally is worn but the bulk of the replica seems to be in decent condition.

This replica has found its way into our boneyard due to it having excessive wear across the entirety of the replica alongside the slide being chipped where the slide lock/release usually holds the slide in place - this is still usable however we do not trust it not going back into battery purely by just moving around with this replica.

Other than this issue, the replica fires normally where we were seeing an average of 270 FPS on .2 BBs using Abbey Predator Ultra Green Gas; we will note that this FPS was very inconsistent where we were seeing highs of 310 FPS to lows of 230 FPS. Again, this replica isn't the best looker however you could get yourself some sort of kit to throw the replica into and turn it into an extremely fun platform to use!

This SSG10 A1 Sniper Rifle is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use across the platform. The box that the platform is provided in is also in a slightly damaged state, though can close and still contains the foam necessary to keep the rifle cosy inside.

The three screws required to assemble this platform are unfortunately missing, so replacements will need to be sourced in order to hold the upper properly into the stock. The magazine originally provided with the rifle is also missing, so a fresh one of those will be needed too.

For a detailed description and specifications of the original product, click here!

We're unsure why this platform was returned to us. During testing, its ETU was initially in set-up mode, which we can only assume a fault with it may be in play, or the gearbox has at one point been opened up for a potential attempted repair. The gun is fully functional, and whilst going through our chronograph gave us results of 330 FPS with 0.20g BBs. With minimal to no faults obvious, this platform is ready to skirmish when you are!

This SSR63 A2 AR36K AEG is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pristine external condition and should be functional, though has been reported to be underpowered. The cause of the low power output is unknown but it shouldn't take much for any techy folk out there to figure out and get fixed. It must also be noted that this gun doesn't come provided with a magazine, but its magazine well does conveniently take common M4/AR-15 AEG magazines that you as an Airsofter should have plenty of laying around.

For a detailed description and specifications of the original product, click here!

This SSR63 A2 AR36K AEG is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pristine external condition and should be functional, though has been reported to be underpowered. The cause of the low power output is unknown but it shouldn't take much for any techy folk out there to figure out and get fixed. It must also be noted that this gun doesn't come provided with a magazine, but its magazine well does conveniently take common M4/AR-15 AEG magazines that you as an Airsofter should have plenty of laying around.

For a detailed description and specifications of the original product, click here!

This SSR63 A2 AR36K AEG is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pristine external condition and should be functional, though has been reported to be underpowered. The cause of the low power output is unknown but it shouldn't take much for any techy folk out there to figure out and get fixed. It must also be noted that this gun doesn't come provided with a magazine, but its magazine well does conveniently take common M4/AR-15 AEG magazines that you as an Airsofter should have plenty of laying around.

For a detailed description and specifications of the original product, click here!

This SSR63 A2 AR36K AEG is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pristine external condition and should be functional, though has been reported to be underpowered. The cause of the low power output is unknown but it shouldn't take much for any techy folk out there to figure out and get fixed. It must also be noted that this gun doesn't come provided with a magazine, but its magazine well does conveniently take common M4/AR-15 AEG magazines that you as an Airsofter should have plenty of laying around.

For a detailed description and specifications of the original product, click here!

This SSR63 A2 AR36K AEG is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pristine external condition and should be functional, though has been reported to be underpowered. The cause of the low power output is unknown but it shouldn't take much for any techy folk out there to figure out and get fixed. It must also be noted that this gun doesn't come provided with a magazine, but its magazine well does conveniently take common M4/AR-15 AEG magazines that you as an Airsofter should have plenty of laying around.

For a detailed description and specifications of the original product, click here!

This SSR63 A2 AR36K AEG is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pristine external condition and should be functional, though has been reported to be underpowered. The cause of the low power output is unknown but it shouldn't take much for any techy folk out there to figure out and get fixed. It must also be noted that this gun doesn't come provided with a magazine, but its magazine well does conveniently take common M4/AR-15 AEG magazines that you as an Airsofter should have plenty of laying around.

For a detailed description and specifications of the original product, click here!

This item is being sold as a Boneyard as it has a crack in the lower receiver. This is on the left-hand front, near the magwell. This doesn't affect the functionality of the rifle, it has been tested and fires perfectly fine and while the crack's presence doesn't seem to affect the integrity of the rifle, be aware that an issue is possible to surface in the future.

Close to the crack are a couple of relatively noticeable scuffs, but other than that, the gun is in fantastic condition.

This is a bargain at this price, so grab it before it goes!

This SSG10 A1 Sniper Rifle is part of a batch of guns that Team Novritsch deemed unfit for regular sale. The gun itself is in pretty decent external condition and should be perfectly functional, though there may be a few signs of wear/use across the platform. The box that the platform is provided in is also in a slightly damaged state, though can close and still contains the foam necessary to keep the rifle cosy inside.

For a detailed description and specifications of the original product, click here!

This replica is in the Boneyard with a missing magazine latch. A new one will need to be sourced, else it'll be rather difficult to use the replica as it currently is. During testing, we were seeing 270 FPS on 0.20g BBs from this thing - usually we'd say this is quite weak, however chucking in a stronger spring will definitely kill-off this replica so the recorded FPS is perfect.

This legendary replica has unfortunately found its way into our boneyard due to some past issues (all which seem to have been resolved). The replica was one of the earlier versions of the Dracarys automatic shotguns that didn't feature a mosfet which is how this one found its way into the boneyard (most likely due to faulty wiring or damaged trigger contacts) - this has since been rectified and has been upgraded to the newer version of the platform with a kestrel basic mosfet (old wiring and components are in a bag within the box).

Other than this, the replica is in perfect condition par from a few marks. Firing through our chronograph presented us with 320 FPS on .2 BBs so if you're after a legendary replica from your favourite action movie, this may be the one for you!

This iconic replica has landed in our boneyard due to being in a state of disrepair - as far as things go, the replica is fully functional where we were seeing 380 FPS on .2 BBs by manually feeding BBs into the replica as the magazine has gone missing. The stock appears to have been detached but potentially may be able to re-attach it due to the necessary parts being in the box and seem to be in good condition however we cannot guarantee that there isn't any further damages that we can't see which may explain why it's disassembled in the first place.

This beautiful replica has unfortunately landed in our boneyard due to having a cracked cylinder - two portions on either side have completely chipped off rendering the replica non-functional. Apparently spare parts aren't obtainable though contacting the manufacturer directly may be a solution to get the part made to replace the current cylinder.

Other than this, the replica is partially disassembled with the parts being placed in a plastic bag in the case so reassembly should be easy enough. The replica is in quite good condition externally so if you aren't able to find a solution for the broken cylinder then this could double as a cool prop as some sort of space-age rifle. The scope is in mint condition too so this could be transferred to a premium rifle of some sort.